Evidence · FSL
fslstats
fslstats prints statistics of an image: its mean, standard deviation, extremes, robust range, percentiles, entropy, voxel count and volume, centre of gravity, bounding box or histogram, per volume, per label or as JSON. fMRIPrep’s goodvoxels mask reads four of its numbers, and BET’s script one. The replica (larmorx-nc) prints FSL 6.0.7.23’s text byte for byte, with its messages and exit status, in all 172 of its compared cases, out of 208. The clean room (larmorx) is within its record’s thresholds in all 126 of its compared cases, out of 162, and prints FSL’s numbers in 125 of them, fMRIPrep’s goodvoxels calls among them; the other is BET’s call, within the record’s bound (6 × 10⁻⁸ relative).
- Ports
- replica
larmorx-ncFSL Licence: non-commercial use only: translated from FSL 6.0.7.23's source (fsl-avwutils 2209.6, with fsl-newimage 2601.0's statistics and nlohmann/json 3.12.0's number formatting); it runs as a separate program - clean room
larmorxApache-2.0: cratelarmorx-fsl, written from specs/fslstats.md, FSL's usage text and documentation and runs of FSL 6.0.7.23, without FSL's source (2026-11-03 and 04)
- replica
- Status
- replica experimental; clean room experimental
- Records
- the replica's: standard comparison (FSL 6.0.7.23) · the clean room's: standard comparison (FSL 6.0.7.23) · benchmark fsl-maths (with fslmaths)
- Reference
fslstats· API page fsl-stats · its companion: fslmaths
What is compared
fslstats [-t] [-K <labels>] [-json] <image> [options] prints statistics of an image. The options act in their order. Some change what the options after them see:
-land-uset lower and upper thresholds,-ka mask,-da difference image;-atakes absolute values, and-nturns NaN into 0.
The others print a number or a few:
-m,-M: the mean, and the mean of the nonzero voxels;-s,-S: the standard deviation, likewise;-R: the minimum and maximum;-r: the robust range, 2 % and 98 %;-p,-P: percentiles;-e,-E: the entropy;-v,-V: voxels and volume;-w: the smallest box holding the nonzero voxels;-x,-X: the maximum’s and the minimum’s voxels;-c,-C: the centre of gravity, in mm and in voxels;-h,-H: histograms.
-t prints one line per volume, -K one per label of an index image, -json everything as JSON. Numbers print with six decimals, as nipype reads them.
fMRIPrep reads four of them in its goodvoxels mask (--project-goodvoxels): -M and -S of the ribbon’s coefficient of variation, before and after its modulation. BET’s script reads one, fslstats <image> -l <t> -C, its starting centre; LARMORX’s BET replica runs it through this code.
The two ports run beside FSL 6.0.7.23’s fslstats on the same files with the same arguments, and their printed text is compared with FSL’s.
larmorx fsl fslstats cov_ribbon.nii.gz -M -S
larmorx fsl fslstats -t -K labels.nii.gz bold.nii.gz -MThe first prints the mean and standard deviation of an image’s nonzero voxels, as fMRIPrep reads them. The second prints, volume by volume, the mean of each label’s nonzero voxels.
import larmorx as lx
text = lx.fsl.fslstats("cov_ribbon.nii.gz", "-M", "-S") # the command line's options: its standard output
mean = lx.fsl.image_mean("cov_ribbon.nii.gz", nonzero=True) # one typed wrapper per statistic: numbersThe calls above leave implementation at "auto". The API page describes the generic function and the typed wrappers. How to read what follows: how to read the evidence.
Its two ports
FSL comes under the FSL Licence, which allows non-commercial use only. So LARMORX has two ports of its FSL programs. The replica is translated from FSL’s source and lives in its own package, larmorx-nc (pip install larmorx-nc). The clean room is in larmorx itself. It is written without FSL’s code, from fslstats’ behavioural specification (specs/fslstats.md), FSL’s usage text and documentation and runs of FSL 6.0.7.23 as a black box.
implementation="auto" | "replica" | "clean-room" chooses between them ("original" in 0.1.0rc1). On the command line, larmorx --implementation clean-room fsl fslstats ... does the same from the next release; in 0.1.0rc1 it is the environment variable LARMORX_IMPLEMENTATION. auto, and larmorx fsl fslstats, take the replica when larmorx-nc is installed, else the clean room.
The replica follows FSL 6.0.7.23 and needs no FSL installation. It lives in larmorx-nc’s shared core, beside the image statistics FAST and BET use, with nlohmann/json 3.12.0’s number formatting for -json.
The clean room has every option and preoption (-t, -K, -json), every message, exit status and failure case (a crash’s lost buffered output included), and the defects with their switches. It prints -json’s numbers in nlohmann’s format as the specification describes it. Its passes run in parallel, the masked sums in FSL’s blocks added in order, so its text is the same at any thread count; it holds one copy of the image. Where the specification leaves a convention open, it follows FSL’s as black-box runs measured it (findings 21 and 28 of its findings).
The C library’s last digits (since 2026-11-04). fslstats’ entropies (-e, -E) take logarithms from glibc, the C library of Linux, whose results are now and then one unit in the last place away from the exact value rounded once. LARMORX computes them correctly rounded, the same on every platform. Since 2026-11-04 the clean room’s reproduce computes them exactly as glibc 2.35 does, and its default, fix, correctly rounded, naming GLIBC-07 exactly where the printed number would differ (register). On every case of its record the printed numbers, to their six digits, are the same either way: no number of the record moved.
The verdicts at a glance
fslstats prints numbers. The question for the replica is whether it prints FSL’s text, character for character, with FSL’s messages and exit status.
fslstats 6.0.7.23 (standard comparison, 208 cases of the record), by category and verdictSelect a segment to list its cases below.
The replica’s record runs 208 cases against FSL 6.0.7.23 (the record). 172 print FSL’s text byte for byte. In 36 FSL refuses the input or stops, and the replica does the same, with the same message and exit status (rejected by both). The cases cover:
- fMRIPrep’s four goodvoxels calls, and BET’s call on fMRIPrep’s preprocessed T1w;
- FSL’s own tests of fslstats: each option in text and in JSON, against FSL’s expected outputs as well;
- every option in every data type and in combination, the options’ order,
-t,-Kand-json; - every message and failure case;
- the defects LARMORX corrects by default. Each case also runs the replica’s default,
fix, which names every correction where it changes the output (below).
The clean room is written without FSL’s source, so its record holds it to specs/fslstats.md §10 instead:
- the counts, extremes, coordinates, the robust range, percentiles, histograms,
-wand the masked means and standard deviations identical to FSL’s; - the other numbers (the unmasked means and standard deviations,
-D, the entropies, the centres of gravity) within 10−6 relative; - its messages and exit status FSL’s.
fslstats 6.0.7.23 (standard comparison, 162 cases of the record), by category and verdictSelect a segment to list its cases below.
The clean room’s record runs 162 cases against FSL 6.0.7.23 (the record): the replica suite’s cases but FSL’s own tests (they read FSL’s source tree, which a clean-room implementer does not open) and the replica’s three random-testing cases, BET’s call among them, 9 of its own (orig/) and 4 permanent cases of random testing.
- Bit-identical, 125. They print FSL’s numbers, with its messages and exit status. fMRIPrep’s four goodvoxels calls are among them.
- Open, 1. BET’s
-l 0.001 -Con fMRIPrep’s preprocessed T1w is within the bound: its x is 97.862248 against FSL’s 97.862242, 6.1 × 10−8 relative. The cause is the mapping back to millimetres of a neurological image, whose arithmetic in FSL a black box does not show. - Rejected by both, 36. The same message and exit status.
In fMRIPrep: the goodvoxels mask
The four numbers fMRIPrep’s goodvoxels workflow reads between its fslmaths calls, on ds005040’s BOLD series in T1w space (the fourteen fslmaths calls). FSL 6.0.7.23’s printed text, the replica’s in reproduce and in fix and the clean room’s in reproduce and in fix are the same, each of them. fMRIPrep divides the coefficient-of-variation images by the two means, and thresholds the modulated one at its mean plus half its standard deviation. The fMRIPrep runs have no FreeSurfer reconstruction, so the cortical ribbon is a stand-in, the segmentation’s grey matter.
fMRIPrep’s goodvoxels mask, both ports against the original: FSL fslstats 6.0.7.23 (its four calls)
| Node | FSL fslstats 6.0.7.23 prints | replica, reproduce | replica, fix | clean room, reproduce | clean room, fix |
|---|---|---|---|---|---|
cov_ribbon_meanfslstats <cov_ribbon> -M | 0.010577 | 0.010577 | 0.010577 | 0.010577 | 0.010577 |
cov_ribbon_stdfslstats <cov_ribbon> -S | 0.999039 | 0.999039 | 0.999039 | 0.999039 | 0.999039 |
mod_ribbon_meanfslstats <cov_norm_modulate_ribbon> -M | 0.952080 | 0.952080 | 0.952080 | 0.952080 | 0.952080 |
mod_ribbon_stdfslstats <cov_norm_modulate_ribbon> -S | 3.684200 | 3.684200 | 3.684200 | 3.684200 | 3.684200 |
fMRIPrep 25.2.6’s goodvoxels workflow (--project-goodvoxels; not in the fMRIPrep runs) built from its code on ds005040’s BOLD series in T1w space; each call on FSL’s output of the fslmaths node before it (fslmaths’ evidence page shows those fourteen calls). The cortical ribbon is a stand-in, the segmentation’s grey matter: the no-reconall fMRIPrep runs have no FreeSurfer ribbon. fMRIPrep reads each printed number as Python’s float: the means divide the CoV images, mean + std / 2 is the threshold of -thr.
Every option on a real image
Each option once on real data, as a pipeline would call it: FSL’s mean and standard deviation of ds005040’s BOLD series in T1w space, the series itself (63 volumes) for -t, fMRIPrep’s brain mask for -k, fMRIPrep’s segmentation (grey matter, white matter, CSF) at each BOLD voxel for -K, and BET’s call on fMRIPrep’s preprocessed T1w.
- The replica prints FSL’s text in every one.
- Its default,
fix, differs where a correction applies. Without a mask, FSL squares each value of-Sin single precision, so its standard deviation of the nonzero voxels is 29842.182847, where-sgives 29842.182845 for the same voxels. The default takes the masked form and prints the latter (FSL-182, named). - The clean room prints FSL’s text in every one but BET’s call (its centre of gravity within §10’s bound, above), at 14 threads and at one. Its default makes FSL-182’s correction too, and names it.
Every option on a real image, both ports against the original: FSL fslstats 6.0.7.23
| Call | FSL prints (first line) | Lines | replica, reproduce | replica, fix | clean room, reproduce | clean room, fix | clean room, 1 thread against 14 |
|---|---|---|---|---|---|---|---|
robust range (2 % and 98 %)fslstats mean.nii.gz -r | -150.882812 81845.882812 | 1 | identical | identical | identical | identical | identical |
minimum and maximumfslstats mean.nii.gz -R | -119992.320312 166709.671875 | 1 | identical | identical | identical | identical | identical |
entropyfslstats mean.nii.gz -e | 0.799009 | 1 | identical | identical | identical | identical | identical |
entropy of the nonzero voxelsfslstats mean.nii.gz -E | 0.799009 | 1 | identical | identical | identical | identical | identical |
voxels and volumefslstats mean.nii.gz -v | 136400 4051080.000000 | 1 | identical | identical | identical | identical | identical |
nonzero voxels and their volumefslstats mean.nii.gz -V | 136400 4051080.000000 | 1 | identical | identical | identical | identical | identical |
meanfslstats mean.nii.gz -m | 23479.252005 | 1 | identical | identical | identical | identical | identical |
mean of the nonzero voxelsfslstats mean.nii.gz -M | 23479.252005 | 1 | identical | identical | identical | identical | identical |
standard deviationfslstats mean.nii.gz -s | 29842.182845 | 1 | identical | identical | identical | identical | identical |
standard deviation of the nonzero voxelsfslstats mean.nii.gz -S | 29842.182847 | 1 | identical | differs (FSL-182) | identical | differs (FSL-182: 6.7e-11 relative) | identical |
the smallest box holding the nonzero voxelsfslstats mean.nii.gz -w | 0 50 0 62 0 44 0 1 | 1 | identical | identical | identical | identical | identical |
the maximum’s voxelfslstats mean.nii.gz -x | 29 27 5 | 1 | identical | identical | identical | identical | identical |
the minimum’s voxelfslstats mean.nii.gz -X | 37 61 13 | 1 | identical | identical | identical | identical | identical |
centre of gravity (mm)fslstats mean.nii.gz -c | -0.525763 6.260330 37.133664 | 1 | identical | identical | identical | identical | identical |
centre of gravity (voxels)fslstats mean.nii.gz -C | 24.556801 30.279861 21.738571 | 1 | identical | identical | identical | identical | identical |
percentiles 2, 50 and 98fslstats mean.nii.gz -p 2 -p 50 -p 98 | -98.576088 3196.430420 81659.875000 | 1 | identical | identical | identical | identical | identical |
the same of the nonzero voxelsfslstats mean.nii.gz -P 2 -P 50 -P 98 | -98.576088 3196.430420 81659.875000 | 1 | identical | identical | identical | identical | identical |
a histogram of 10 binsfslstats mean.nii.gz -h 10 | 3.000000 | 11 | identical | identical | identical | identical | identical |
a histogram of 10 bins from 0 to 100,000fslstats mean.nii.gz -H 10 0 100000 | 82217.000000 | 11 | identical | identical | identical | identical | identical |
thresholds before the statisticsfslstats mean.nii.gz -l 20000 -u 150000 -M -S -V | 60893.350200 15386.646347 49431 1468100.625000 | 1 | identical | identical | identical | identical | identical |
a mask (fMRIPrep’s)fslstats mean.nii.gz -k mask.nii.gz -M -S -V -r -p 50 | 58089.144129 19481.312590 51660 1534302.000000 6206.583984 92338.625000 61365.343750 | 1 | identical | identical | identical | identical | identical |
a difference image (the std)fslstats mean.nii.gz -d std.nii.gz -M -S | 23063.853335 29531.012654 | 1 | identical | differs (FSL-182) | identical | differs (FSL-182: 3.39e-11 relative) | identical |
absolute valuesfslstats mean.nii.gz -a -M -R | 23537.635269 0.000006 166709.671875 | 1 | identical | identical | identical | identical | identical |
NaN as zerofslstats mean.nii.gz -n -M | 23479.252005 | 1 | identical | identical | identical | identical | identical |
per volume of the series (-t)fslstats -t bold.nii.gz -M -S | 23416.618100 29771.432714 | 63 | identical | differs (FSL-182) | identical | differs (FSL-182: 3.02e-10 relative) | identical |
per label of the segmentation (-K)fslstats -K labels.nii.gz mean.nii.gz -M -S -V | 60460.008995 17457.441311 19302 573269.375000 | 3 | identical | identical | identical | identical | identical |
per volume and labelfslstats -t -K labels.nii.gz bold.nii.gz -M | 60220.379845 | 189 | identical | identical | identical | identical | identical |
as JSON (-json)fslstats -json mean.nii.gz -k mask.nii.gz -M -S -r -R -V -p 50 -w | { | 35 | identical | identical | identical | identical | identical |
BET’s call on fMRIPrep’s preprocessed T1wfslstats t1w.nii.gz -l 0.001 -C | 97.862242 123.338039 149.314597 | 1 | identical | identical | within §10’s bound (6.13e-08 relative) | within §10’s bound (6.13e-08 relative) | identical |
mean.nii.gz and std.nii.gz are FSL’s -Tmean and -Tstd of ds005040’s BOLD series in T1w space (fMRIPrep’s output, bold.nii.gz: 63 volumes), mask.nii.gz fMRIPrep’s brain mask of it, labels.nii.gz fMRIPrep’s segmentation at each BOLD voxel (1 grey matter, 2 white matter, 3 CSF), t1w.nii.gz fMRIPrep’s preprocessed T1w. Each printed text compared byte for byte with FSL’s (through the cache of the original’s runs): identical, every character of every line. The clean room (14 threads, and at one: the same text) is held to specs/fslstats.md §10: counts, extremes, coordinates, the robust range, percentiles, histograms, -w and the masked means and standard deviations identical, the other numbers (the unmasked means and standard deviations, -D, the entropies, the centres of gravity) within 1e-6 relative.
Random testing
The replica’s random-testing run (2026-11-03), shared with fslmaths: random option lists on random images, each run by FSL 6.0.7.23 (through the cache of the original’s runs) and by the replica, the printed text compared.
Random testing, the replica against the original: FSL fslstats 6.0.7.23 (69,077 random calls, 2026-11-03)
| Cases | |
|---|---|
| Random cases of fslstats, each compared with FSL 6.0.7.23 | 69,077 |
| bit-identical (every file, the messages, the exit status) | 69,068 |
of them, a notice of the default, fix, without a visible change | 0 |
| differing in the run (each explained in the note) | 9 |
| distinct options drawn | 31 |
| -t (per volume), -K (per label), -json | 7,837 / 8,276 / 8,238 |
| length (minutes; 13 jobs at one thread each, both programs) | 24 |
A random-testing run of the replica, fslmaths and fslstats at once, 24 minutes long (seed fsl-maths-trial, larmorx 0427fad149ac): one to five options (or fMRIPrep’s and BET’s forms) with -t, -K and -json, on the same kinds of images and masks. Every case in a memory box of 1.5 GiB (peaks below 1.05 GiB), FSL through the cache of the original’s runs (use mode). Its nine differences were mistakes of the replica’s, fixed with permanent cases: the sign of NaN in -c and -C with NaN and infinities in the image (FSL’s build adds each block’s partial sums in its own order), and -json’s notices before an error.
The clean room’s random-testing run (2026-11-03), beside fslmaths’ and 20 minutes long: 150,000 random option lists, the preoptions and fMRIPrep’s and BET’s forms among them, each compared as the record compares. 149,214 agreed, and 7 differed only by a correction its default names. Of the 779 that differed, run again with the part’s final build:
- 545 were the clean room’s mistake, fixed with permanent cases: the histograms of
-hand-Hwhen no histogram is made; - 74 were the suite’s: §10’s bound over a histogram’s lines, and an output cut short;
- 160 are explained:
-cand-Cof images holding NaN and infinities, where FSL’s NaN carries another sign (129), and the last printed digit at §10’s bound (31).
None stays open.
Random testing, the clean room against the original: FSL fslstats 6.0.7.23 (150,000 random calls, 2026-11-03)
| Cases | |
|---|---|
| Random cases of fslstats, each compared with FSL 6.0.7.23 | 150,000 |
| within the record’s thresholds, every exact check passed | 149,214 |
differing only by a correction the default, fix, names | 7 |
| differing in the run (each one triaged below) | 779 |
| distinct options and settings drawn | 31 |
| -t (per volume), -K (per label), -json | 17,133 / 18,109 / 17,890 |
| length (minutes; 13 jobs at one thread each, both programs) | 19.8 |
A random-testing run of the clean rooms, fslmaths and fslstats at once, 20 minutes long (seed fsl-maths-trial, larmorx a09928ecb344): the streams of the replica’s run drawn again, so that run’s calls of FSL were served by the cache of the original’s runs and the rest stored there; realistic cases only, each compared as the record compares. Every case in a memory box of 1.5 GiB (peaks below 0.92 GiB). The differing cases were re-run with the part’s final build and each put in one category (below).
The clean room’s differences from the original in the run of 2026-11-03, by category
| Category | Cases | Reproducer |
|---|---|---|
| a LARMORX mistake, fixed: fslstats’ histograms without a histogram (the output and the JSON of -h and -H when no histogram is made) | 545 | fsl-maths-trial-00163-original |
| explained: -c and -C of images holding NaN and infinities: the NaN’s sign (spec question 34) | 129 | fsl-maths-trial-02539-original |
| the suite’s own mistake, fixed: §10’s bound over a histogram’s lines and an output cut short | 74 | fsl-maths-trial-02265-original |
| explained: the last printed digit at §10’s bound | 31 | fsl-maths-trial-10889-original |
Every differing case of the run re-run with the part’s final build and put in one category by its recipe and its first failed check (validation/investigations/cleanroom-maths/triage_counts.py, its output validation/investigations/cleanroom-maths/trial_triage.json), each category’s cause established by probes and replays (docs/findings/fsl-maths-original.md, findings 24 to 30); LARMORX’s mistakes and the suite’s are fixed, with 17 permanent cases of fslmaths and 4 of fslstats in the records; the reproducer is a finding of the run (difftest --replay).
Every case
Each case of the two records, the replica’s and the clean room’s, both against FSL 6.0.7.23 (a column each), with what it tests, its command line, each port’s verdict and the reason. The 13 cases only the clean room’s record holds are its own: orig/ and the permanent cases random testing gave it. Search, filter by category or verdict (or select a segment of a chart above), sort by a column; #case=<name> links to one case.
221 cases
| Case | Category | What it tests | replica | clean room | Checks |
|---|---|---|---|---|---|
fmriprep-goodvoxels/ds005040-sub-002-noreconall/cov_ribbon_mean | fMRIPrep's calls | fMRIPrep's goodvoxels mask, node cov_ribbon_mean (--project-goodvoxels; the ribbon a stand-in: the segmentation's grey matter)command linefslstats <cov_ribbon> -M cov_ribbon_mean.nii.gz | Bit-identical every file written (1/1) byte for byte, with FSL’s exit status and messages | Bit-identical Every printed text with FSL’s values (the record measures every value), with FSL’s exit status and messages. | 6/6 · 4/4 |
fmriprep-goodvoxels/ds005040-sub-002-noreconall/cov_ribbon_std | fMRIPrep's calls | fMRIPrep's goodvoxels mask, node cov_ribbon_std (--project-goodvoxels; the ribbon a stand-in: the segmentation's grey matter)command linefslstats <cov_ribbon> -S cov_ribbon_std.nii.gz | Bit-identical every file written (1/1) byte for byte, with FSL’s exit status and messages | Bit-identical Every printed text with FSL’s values (the record measures every value), with FSL’s exit status and messages. | 6/6 · 4/4 |
fmriprep-goodvoxels/ds005040-sub-002-noreconall/mod_ribbon_mean | fMRIPrep's calls | fMRIPrep's goodvoxels mask, node mod_ribbon_mean (--project-goodvoxels; the ribbon a stand-in: the segmentation's grey matter)command linefslstats <cov_norm_modulate_ribbon> -M mod_ribbon_mean.nii.gz | Bit-identical every file written (1/1) byte for byte, with FSL’s exit status and messages | Bit-identical Every printed text with FSL’s values (the record measures every value), with FSL’s exit status and messages. | 6/6 · 4/4 |
fmriprep-goodvoxels/ds005040-sub-002-noreconall/mod_ribbon_std | fMRIPrep's calls | fMRIPrep's goodvoxels mask, node mod_ribbon_std (--project-goodvoxels; the ribbon a stand-in: the segmentation's grey matter)command linefslstats <cov_norm_modulate_ribbon> -S mod_ribbon_std.nii.gz | Bit-identical every file written (1/1) byte for byte, with FSL’s exit status and messages | Bit-identical Every printed text with FSL’s values (the record measures every value), with FSL’s exit status and messages. | 6/6 · 4/4 |
bet/ds005040-sub-002-noreconall/T1w | BET's call | BET's call: fslstats <T1w> -l 0.001 -C (fMRIPrep's preprocessed T1w)command linefslstats <fMRIPrep's preprocessed T1w> -l 0.001 -C | Bit-identical every file written (1/1) byte for byte, with FSL’s exit status and messages | Open difference Within the record’s thresholds, not bit for bit (standard output: 6.13e-08): BET’s call: the x of the centre of gravity 6.1e-8 relative from FSL’s (97.862248 against 97.862242), within §10’s 1e-6: the mapping of the sums back to millimetres in a neurological image, whose arithmetic in FSL is not known (findings 21; spec question 24). | 5/5 · 4/4 |
cli/usage | the command line | no arguments: the usage (status 1)command linefslstats | Rejected by both fslstats exits 1; the same from the replica. | Rejected by both fslstats exits 1; the same from the clean room. | 6/6 · 4/4 |
cli/usage-one | the command line | only an input: the usagecommand linefslstats <a: a synthetic input> | Rejected by both fslstats exits 1; the same from the replica. | Rejected by both fslstats exits 1; the same from the clean room. | 6/6 · 4/4 |
cli/usage-K | the command line | -K and its mask only: the usagecommand linefslstats -K <lab: a synthetic input> | Rejected by both fslstats exits 1; the same from the replica. | Rejected by both fslstats exits 1; the same from the clean room. | 6/6 · 4/4 |
cli/usage-t | the command line | -t and an input only: the usagecommand linefslstats -t <a: a synthetic input> | Rejected by both fslstats exits 1; the same from the replica. | Rejected by both fslstats exits 1; the same from the clean room. | 6/6 · 4/4 |
cli/missing | the command line | an input that does not exist (status 255)command linefslstats missing.nii.gz -m | Rejected by both fslstats exits 255; the same from the replica. Image Exception : #63 :: No image files match: missing Image Exception : #22 :: Failed to read volume missing.nii.gz Error : No image files match: missing Failed to read volume missing.nii.gz Error : | Rejected by both fslstats exits 255; the same from the clean room. Image Exception : #63 :: No image files match: missing Image Exception : #22 :: Failed to read volume missing.nii.gz Error : No image files match: missing Faile | 6/6 · 4/4 |
cli/unknown | the command line | an unknown option (status 3)command linefslstats <a: a synthetic input> -m -q -M | Rejected by both fslstats exits 3; the same from the replica. Unrecognised option: -q | Rejected by both fslstats exits 3; the same from the clean room. Unrecognised option: -q | 6/6 · 4/4 |
cli/no-arg-l | the command line | -l without its argument (status 2)command linefslstats <a: a synthetic input> -m -l | Rejected by both fslstats exits 2; the same from the replica. Must specify an argument to -l | Rejected by both fslstats exits 2; the same from the clean room. Must specify an argument to -l | 6/6 · 4/4 |
cli/no-arg-u | the command line | -u without its argument (status 2)command linefslstats <a: a synthetic input> -m -u | Rejected by both fslstats exits 2; the same from the replica. Must specify an argument to -u | Rejected by both fslstats exits 2; the same from the clean room. Must specify an argument to -u | 6/6 · 4/4 |
cli/no-arg-k | the command line | -k without its argument (status 2)command linefslstats <a: a synthetic input> -m -k | Rejected by both fslstats exits 2; the same from the replica. Must specify an argument to -k | Rejected by both fslstats exits 2; the same from the clean room. Must specify an argument to -k | 6/6 · 4/4 |
cli/no-arg-d | the command line | -d without its argument (status 2)command linefslstats <a: a synthetic input> -m -d | Rejected by both fslstats exits 2; the same from the replica. Must specify an argument to -d | Rejected by both fslstats exits 2; the same from the clean room. Must specify an argument to -d | 6/6 · 4/4 |
cli/no-arg-p | the command line | -p without its argument (status 2)command linefslstats <a: a synthetic input> -m -p | Rejected by both fslstats exits 2; the same from the replica. Must specify an argument to -p | Rejected by both fslstats exits 2; the same from the clean room. Must specify an argument to -p | 6/6 · 4/4 |
cli/no-arg-P | the command line | -P without its argument (status 2)command linefslstats <a: a synthetic input> -m -P | Rejected by both fslstats exits 2; the same from the replica. Must specify an argument to -P | Rejected by both fslstats exits 2; the same from the clean room. Must specify an argument to -P | 6/6 · 4/4 |
cli/no-arg-h | the command line | -h without its argument (status 2)command linefslstats <a: a synthetic input> -m -h | Rejected by both fslstats exits 2; the same from the replica. Must specify the number of bins | Rejected by both fslstats exits 2; the same from the clean room. Must specify the number of bins | 6/6 · 4/4 |
cli/no-arg-H | the command line | -H without its argument (status 2)command linefslstats <a: a synthetic input> -m -H | Rejected by both fslstats exits 2; the same from the replica. Must specify the number of bins | Rejected by both fslstats exits 2; the same from the clean room. Must specify the number of bins | 6/6 · 4/4 |
cli/H-no-min | the command line | -H without its minimumcommand linefslstats <a: a synthetic input> -H 5 | Rejected by both fslstats exits 2; the same from the replica. Must specify the histogram minimum intensity | Rejected by both fslstats exits 2; the same from the clean room. Must specify the histogram minimum intensity | 6/6 · 4/4 |
cli/H-no-max | the command line | -H without its maximumcommand linefslstats <a: a synthetic input> -H 5 0 | Rejected by both fslstats exits 2; the same from the replica. Must specify the histogram maximum intensity | Rejected by both fslstats exits 2; the same from the clean room. Must specify the histogram maximum intensity | 6/6 · 4/4 |
cli/p-above | the command line | -p 101 (status 1)command linefslstats <a: a synthetic input> -p 101 | Rejected by both fslstats exits 1; the same from the replica. Percentile must be between 0 and 100 | Rejected by both fslstats exits 1; the same from the clean room. Percentile must be between 0 and 100 | 6/6 · 4/4 |
cli/P-below | the command line | -P -1 (status 1)command linefslstats <a: a synthetic input> -P -1 | Rejected by both fslstats exits 1; the same from the replica. Percentile must be between 0 and 100 | Rejected by both fslstats exits 1; the same from the clean room. Percentile must be between 0 and 100 | 6/6 · 4/4 |
cli/h-zero | the command line | -h 0 (status 1)command linefslstats <a: a synthetic input> -h 0 | Rejected by both fslstats exits 1; the same from the replica. Must specify at least 1 bin | Rejected by both fslstats exits 1; the same from the clean room. Must specify at least 1 bin | 6/6 · 4/4 |
cli/h-fraction | the command line | -h 0.5: 0 bins after truncationcommand linefslstats <a: a synthetic input> -h 0.5 | Rejected by both fslstats exits 1; the same from the replica. Must specify at least 1 bin | Rejected by both fslstats exits 1; the same from the clean room. Must specify at least 1 bin | 6/6 · 4/4 |
cli/h-text | the command line | -h abc (atof: 0)command linefslstats <a: a synthetic input> -h abc | Rejected by both fslstats exits 1; the same from the replica. Must specify at least 1 bin | Rejected by both fslstats exits 1; the same from the clean room. Must specify at least 1 bin | 6/6 · 4/4 |
cli/K-4d | the command line | -K with a 4D index mask (status 3)command linefslstats -K <lab4: a synthetic input> <a: a synthetic input> -m | Rejected by both fslstats exits 3; the same from the replica. Index mask must be 3D | Rejected by both fslstats exits 3; the same from the clean room. Index mask must be 3D | 6/6 · 4/4 |
cli/K-size | the command line | -K with an index mask of another size (an exception)command linefslstats -K <labbig: a synthetic input> <a: a synthetic input> -m | Rejected by both fslstats exits 255; the same from the replica. Image Exception : #3 :: Attempted to multiply images of different sizes Attempted to multiply images of different sizes | Rejected by both fslstats exits 255; the same from the clean room. Image Exception : #3 :: Attempted to multiply images of different sizes Attempted to multiply images of different sizes | 6/6 · 4/4 |
cli/K-none | the command line | -K with no positive label: nothing printedcommand linefslstats -K <labneg: a synthetic input> <a: a synthetic input> -m | Bit-identical every file written (2/2) byte for byte, with FSL’s exit status and messages | Bit-identical Every printed text with FSL’s values (the record measures every value), with FSL’s exit status and messages. | 6/6 · 4/4 |
cli/k-size | the command line | -k with a mask of another size (status 3)command linefslstats <a: a synthetic input> -k <mbig: a synthetic input> -m | Rejected by both fslstats exits 3; the same from the replica. Mask and image must be the same size | Rejected by both fslstats exits 3; the same from the clean room. Mask and image must be the same size | 6/6 · 4/4 |
cli/k-tsize | the command line | -k with a mask of more volumes (status 3)command linefslstats <a4: a synthetic input> -k <m4l: a synthetic input> -m | Rejected by both fslstats exits 3; the same from the replica. Mask and image must be the same size | Rejected by both fslstats exits 3; the same from the clean room. Mask and image must be the same size | 6/6 · 4/4 |
cli/k-missing | the command line | -k naming a missing filecommand linefslstats <a: a synthetic input> -k nomask.nii.gz -m | Rejected by both fslstats exits 255; the same from the replica. Image Exception : #63 :: No image files match: nomask Image Exception : #22 :: Failed to read volume nomask.nii.gz Error : No image files match: nomask Failed to read volume nomask.nii.gz Error : No i | Rejected by both fslstats exits 255; the same from the clean room. Image Exception : #63 :: No image files match: nomask Image Exception : #22 :: Failed to read volume nomask.nii.gz Error : No image files match: nomask Failed t | 6/6 · 4/4 |
cli/d-size | the command line | -d with an image of another size (status 3)command linefslstats <a: a synthetic input> -d <dbig: a synthetic input> -m | Rejected by both fslstats exits 3; the same from the replica. Image used with -d must be the same size as the base image | Rejected by both fslstats exits 3; the same from the clean room. Image used with -d must be the same size as the base image | 6/6 · 4/4 |
cli/d-tsize | the command line | -d with more volumes (status 3)command linefslstats <a: a synthetic input> -d <d4: a synthetic input> -m | Rejected by both fslstats exits 3; the same from the replica. Image must be the same size as the base image | Rejected by both fslstats exits 3; the same from the clean room. Image must be the same size as the base image | 6/6 · 4/4 |
cli/json-twice | the command line | -json -jsoncommand linefslstats -json -json <a: a synthetic input> -m | Bit-identical every file written (1/1) byte for byte, with FSL’s exit status and messages | Bit-identical Every printed text with FSL’s values (the record measures every value), with FSL’s exit status and messages. | 6/6 · 4/4 |
cli/json-empty | the command line | -json with only an option that prints nothingcommand linefslstats -json <a: a synthetic input> -a | Bit-identical every file written (1/1) byte for byte, with FSL’s exit status and messages | Bit-identical Every printed text with FSL’s values (the record measures every value), with FSL’s exit status and messages. | 6/6 · 4/4 |
cli/json-repeat | the command line | -json with an option twice (the last kept)command linefslstats -json <a: a synthetic input> -M -l 4 -M | Bit-identical every file written (1/1) byte for byte, with FSL’s exit status and messages | Bit-identical Every printed text with FSL’s values (the record measures every value), with FSL’s exit status and messages. | 6/6 · 4/4 |
opt/-r | options | -r on a 3D imagecommand linefslstats <a: a synthetic input> -r | Bit-identical every file written (1/1) byte for byte, with FSL’s exit status and messages | Bit-identical Every printed text with FSL’s values (the record measures every value), with FSL’s exit status and messages. | 6/6 · 4/4 |
opt/json-r | options | -json -rcommand linefslstats -json <a: a synthetic input> -r | Bit-identical every file written (1/1) byte for byte, with FSL’s exit status and messages | Bit-identical Every printed text with FSL’s values (the record measures every value), with FSL’s exit status and messages. | 6/6 · 4/4 |
opt/-R | options | -R on a 3D imagecommand linefslstats <a: a synthetic input> -R | Bit-identical every file written (1/1) byte for byte, with FSL’s exit status and messages | Bit-identical Every printed text with FSL’s values (the record measures every value), with FSL’s exit status and messages. | 6/6 · 4/4 |
opt/json-R | options | -json -Rcommand linefslstats -json <a: a synthetic input> -R | Bit-identical every file written (1/1) byte for byte, with FSL’s exit status and messages | Bit-identical Every printed text with FSL’s values (the record measures every value), with FSL’s exit status and messages. | 6/6 · 4/4 |
opt/-e | options | -e on a 3D imagecommand linefslstats <a: a synthetic input> -e | Bit-identical every file written (1/1) byte for byte, with FSL’s exit status and messages | Bit-identical Every printed text with FSL’s values (the record measures every value), with FSL’s exit status and messages. | 6/6 · 4/4 |
opt/json-e | options | -json -ecommand linefslstats -json <a: a synthetic input> -e | Bit-identical every file written (1/1) byte for byte, with FSL’s exit status and messages | Bit-identical Every printed text with FSL’s values (the record measures every value), with FSL’s exit status and messages. | 6/6 · 4/4 |
opt/-E | options | -E on a 3D imagecommand linefslstats <a: a synthetic input> -E | Bit-identical every file written (1/1) byte for byte, with FSL’s exit status and messages | Bit-identical Every printed text with FSL’s values (the record measures every value), with FSL’s exit status and messages. | 6/6 · 4/4 |
opt/json-E | options | -json -Ecommand linefslstats -json <a: a synthetic input> -E | Bit-identical every file written (1/1) byte for byte, with FSL’s exit status and messages | Bit-identical Every printed text with FSL’s values (the record measures every value), with FSL’s exit status and messages. | 6/6 · 4/4 |
opt/-v | options | -v on a 3D imagecommand linefslstats <a: a synthetic input> -v | Bit-identical every file written (1/1) byte for byte, with FSL’s exit status and messages | Bit-identical Every printed text with FSL’s values (the record measures every value), with FSL’s exit status and messages. | 6/6 · 4/4 |
opt/json-v | options | -json -vcommand linefslstats -json <a: a synthetic input> -v | Bit-identical every file written (1/1) byte for byte, with FSL’s exit status and messages | Bit-identical Every printed text with FSL’s values (the record measures every value), with FSL’s exit status and messages. | 6/6 · 4/4 |
opt/-V | options | -V on a 3D imagecommand linefslstats <a: a synthetic input> -V | Bit-identical every file written (1/1) byte for byte, with FSL’s exit status and messages | Bit-identical Every printed text with FSL’s values (the record measures every value), with FSL’s exit status and messages. | 6/6 · 4/4 |
opt/json-V | options | -json -Vcommand linefslstats -json <a: a synthetic input> -V | Bit-identical every file written (1/1) byte for byte, with FSL’s exit status and messages | Bit-identical Every printed text with FSL’s values (the record measures every value), with FSL’s exit status and messages. | 6/6 · 4/4 |
opt/-m | options | -m on a 3D imagecommand linefslstats <a: a synthetic input> -m | Bit-identical every file written (1/1) byte for byte, with FSL’s exit status and messages | Bit-identical Every printed text with FSL’s values (the record measures every value), with FSL’s exit status and messages. | 6/6 · 4/4 |
opt/json-m | options | -json -mcommand linefslstats -json <a: a synthetic input> -m | Bit-identical every file written (1/1) byte for byte, with FSL’s exit status and messages | Bit-identical Every printed text with FSL’s values (the record measures every value), with FSL’s exit status and messages. | 6/6 · 4/4 |
opt/-M | options | -M on a 3D imagecommand linefslstats <a: a synthetic input> -M | Bit-identical every file written (1/1) byte for byte, with FSL’s exit status and messages | Bit-identical Every printed text with FSL’s values (the record measures every value), with FSL’s exit status and messages. | 6/6 · 4/4 |
opt/json-M | options | -json -Mcommand linefslstats -json <a: a synthetic input> -M | Bit-identical every file written (1/1) byte for byte, with FSL’s exit status and messages | Bit-identical Every printed text with FSL’s values (the record measures every value), with FSL’s exit status and messages. | 6/6 · 4/4 |
opt/-s | options | -s on a 3D imagecommand linefslstats <a: a synthetic input> -s | Bit-identical every file written (1/1) byte for byte, with FSL’s exit status and messages | Bit-identical Every printed text with FSL’s values (the record measures every value), with FSL’s exit status and messages. | 6/6 · 4/4 |
opt/json-s | options | -json -scommand linefslstats -json <a: a synthetic input> -s | Bit-identical every file written (1/1) byte for byte, with FSL’s exit status and messages | Bit-identical Every printed text with FSL’s values (the record measures every value), with FSL’s exit status and messages. | 6/6 · 4/4 |
opt/-S | options | -S on a 3D imagecommand linefslstats <a: a synthetic input> -S | Bit-identical every file written (1/1) byte for byte, with FSL’s exit status and messages | Bit-identical Every printed text with FSL’s values (the record measures every value), with FSL’s exit status and messages. | 6/6 · 4/4 |
opt/json-S | options | -json -Scommand linefslstats -json <a: a synthetic input> -S | Bit-identical every file written (1/1) byte for byte, with FSL’s exit status and messages; its default, | Bit-identical Every printed text with FSL’s values (the record measures every value), with FSL’s exit status and messages; its default, | 6/6 · 4/4 |
opt/-w | options | -w on a 3D imagecommand linefslstats <a: a synthetic input> -w | Bit-identical every file written (1/1) byte for byte, with FSL’s exit status and messages | Bit-identical Every printed text with FSL’s values (the record measures every value), with FSL’s exit status and messages. | 6/6 · 4/4 |
opt/json-w | options | -json -wcommand linefslstats -json <a: a synthetic input> -w | Bit-identical every file written (1/1) byte for byte, with FSL’s exit status and messages | Bit-identical Every printed text with FSL’s values (the record measures every value), with FSL’s exit status and messages. | 6/6 · 4/4 |
opt/-x | options | -x on a 3D imagecommand linefslstats <a: a synthetic input> -x | Bit-identical every file written (1/1) byte for byte, with FSL’s exit status and messages | Bit-identical Every printed text with FSL’s values (the record measures every value), with FSL’s exit status and messages. | 6/6 · 4/4 |
opt/json-x | options | -json -xcommand linefslstats -json <a: a synthetic input> -x | Bit-identical every file written (1/1) byte for byte, with FSL’s exit status and messages | Bit-identical Every printed text with FSL’s values (the record measures every value), with FSL’s exit status and messages. | 6/6 · 4/4 |
opt/-X | options | -X on a 3D imagecommand linefslstats <a: a synthetic input> -X | Bit-identical every file written (1/1) byte for byte, with FSL’s exit status and messages | Bit-identical Every printed text with FSL’s values (the record measures every value), with FSL’s exit status and messages. | 6/6 · 4/4 |
opt/json-X | options | -json -Xcommand linefslstats -json <a: a synthetic input> -X | Bit-identical every file written (1/1) byte for byte, with FSL’s exit status and messages | Bit-identical Every printed text with FSL’s values (the record measures every value), with FSL’s exit status and messages. | 6/6 · 4/4 |
opt/-c | options | -c on a 3D imagecommand linefslstats <a: a synthetic input> -c | Bit-identical every file written (1/1) byte for byte, with FSL’s exit status and messages | Bit-identical Every printed text with FSL’s values (the record measures every value), with FSL’s exit status and messages. | 6/6 · 4/4 |
opt/json-c | options | -json -ccommand linefslstats -json <a: a synthetic input> -c | Bit-identical every file written (1/1) byte for byte, with FSL’s exit status and messages | Bit-identical Every printed text with FSL’s values (the record measures every value), with FSL’s exit status and messages. | 6/6 · 4/4 |
opt/-C | options | -C on a 3D imagecommand linefslstats <a: a synthetic input> -C | Bit-identical every file written (1/1) byte for byte, with FSL’s exit status and messages | Bit-identical Every printed text with FSL’s values (the record measures every value), with FSL’s exit status and messages. | 6/6 · 4/4 |
opt/json-C | options | -json -Ccommand linefslstats -json <a: a synthetic input> -C | Bit-identical every file written (1/1) byte for byte, with FSL’s exit status and messages | Bit-identical Every printed text with FSL’s values (the record measures every value), with FSL’s exit status and messages. | 6/6 · 4/4 |
opt/-D | options | -D on a 3D imagecommand linefslstats <a: a synthetic input> -D | Bit-identical every file written (1/1) byte for byte, with FSL’s exit status and messages | Bit-identical Every printed text with FSL’s values (the record measures every value), with FSL’s exit status and messages. | 6/6 · 4/4 |
opt/json-D | options | -json -Dcommand linefslstats -json <a: a synthetic input> -D | Bit-identical every file written (1/1) byte for byte, with FSL’s exit status and messages | Bit-identical Every printed text with FSL’s values (the record measures every value), with FSL’s exit status and messages. | 6/6 · 4/4 |
opt/neuro-w | options | -w on a neurological image (read mirrored)command linefslstats <an: a synthetic input> -w | Bit-identical every file written (1/1) byte for byte, with FSL’s exit status and messages | Bit-identical Every printed text with FSL’s values (the record measures every value), with FSL’s exit status and messages. | 6/6 · 4/4 |
opt/neuro-x | options | -x on a neurological image (read mirrored)command linefslstats <an: a synthetic input> -x | Bit-identical every file written (1/1) byte for byte, with FSL’s exit status and messages | Bit-identical Every printed text with FSL’s values (the record measures every value), with FSL’s exit status and messages. | 6/6 · 4/4 |
opt/neuro-X | options | -X on a neurological image (read mirrored)command linefslstats <an: a synthetic input> -X | Bit-identical every file written (1/1) byte for byte, with FSL’s exit status and messages | Bit-identical Every printed text with FSL’s values (the record measures every value), with FSL’s exit status and messages. | 6/6 · 4/4 |
opt/neuro-C | options | -C on a neurological image (read mirrored)command linefslstats <an: a synthetic input> -C | Bit-identical every file written (1/1) byte for byte, with FSL’s exit status and messages | Bit-identical Every printed text with FSL’s values (the record measures every value), with FSL’s exit status and messages. | 6/6 · 4/4 |
opt/neuro-c | options | -c on a neurological image (read mirrored)command linefslstats <an: a synthetic input> -c | Bit-identical every file written (1/1) byte for byte, with FSL’s exit status and messages | Bit-identical Every printed text with FSL’s values (the record measures every value), with FSL’s exit status and messages. | 6/6 · 4/4 |
opt/p | options | -p 50command linefslstats <a: a synthetic input> -p 50 | Bit-identical every file written (1/1) byte for byte, with FSL’s exit status and messages | Bit-identical Every printed text with FSL’s values (the record measures every value), with FSL’s exit status and messages. | 6/6 · 4/4 |
opt/p0 | options | -p 0command linefslstats <a: a synthetic input> -p 0 | Bit-identical every file written (1/1) byte for byte, with FSL’s exit status and messages | Bit-identical Every printed text with FSL’s values (the record measures every value), with FSL’s exit status and messages. | 6/6 · 4/4 |
opt/p100 | options | -p 100command linefslstats <a: a synthetic input> -p 100 | Bit-identical every file written (1/1) byte for byte, with FSL’s exit status and messages | Bit-identical Every printed text with FSL’s values (the record measures every value), with FSL’s exit status and messages. | 6/6 · 4/4 |
opt/P | options | -P 30command linefslstats <a: a synthetic input> -P 30 | Bit-identical every file written (1/1) byte for byte, with FSL’s exit status and messages | Bit-identical Every printed text with FSL’s values (the record measures every value), with FSL’s exit status and messages. | 6/6 · 4/4 |
opt/h | options | -h 7command linefslstats <a: a synthetic input> -h 7 | Bit-identical every file written (1/1) byte for byte, with FSL’s exit status and messages | Bit-identical Every printed text with FSL’s values (the record measures every value), with FSL’s exit status and messages. | 6/6 · 4/4 |
opt/H | options | -H 7 0 5 (values outside the limits)command linefslstats <a: a synthetic input> -H 7 0 5 | Bit-identical every file written (1/1) byte for byte, with FSL’s exit status and messages | Bit-identical Every printed text with FSL’s values (the record measures every value), with FSL’s exit status and messages. | 6/6 · 4/4 |
opt/json-h | options | -json -h 4command linefslstats -json <a: a synthetic input> -h 4 | Bit-identical every file written (1/1) byte for byte, with FSL’s exit status and messages | Bit-identical Every printed text with FSL’s values (the record measures every value), with FSL’s exit status and messages. | 6/6 · 4/4 |
opt/a | options | -a then -m -Rcommand linefslstats <a: a synthetic input> -a -m -R | Bit-identical every file written (1/1) byte for byte, with FSL’s exit status and messages | Bit-identical Every printed text with FSL’s values (the record measures every value), with FSL’s exit status and messages. | 6/6 · 4/4 |
opt/n | options | -n then -m -R (NaN and infinities)command linefslstats <inf: a synthetic input> -n -m -R -s | Bit-identical every file written (1/1) byte for byte, with FSL’s exit status and messages | Bit-identical Every printed text with FSL’s values (the record measures every value), with FSL’s exit status and messages. | 6/6 · 4/4 |
opt/inf | options | infinities and NaN without -ncommand linefslstats <inf: a synthetic input> -m -M -v -V | Bit-identical every file written (1/1) byte for byte, with FSL’s exit status and messages | Bit-identical Every printed text with FSL’s values (the record measures every value), with FSL’s exit status and messages. | 6/6 · 4/4 |
opt/4d | options | every output on a 4D imagecommand linefslstats <a4: a synthetic input> -r -R -e -E -v -V -m -M -s -S -w -x -X -c -C -D -p 40 -P 40 -h 5 -H 5 0 4 | Bit-identical every file written (1/1) byte for byte, with FSL’s exit status and messages | Bit-identical Every printed text with FSL’s values (the record measures every value), with FSL’s exit status and messages. | 6/6 · 4/4 |
order/M-l-M | the options' order | the usage's example: -M -l 4 -Mcommand linefslstats <a: a synthetic input> -M -l 4 -M | Bit-identical every file written (1/1) byte for byte, with FSL’s exit status and messages | Bit-identical Every printed text with FSL’s values (the record measures every value), with FSL’s exit status and messages. | 6/6 · 4/4 |
order/thresholds | the options' order | -l 2 -u 8 then the outputscommand linefslstats <a: a synthetic input> -l 2 -u 8 -r -R -e -E -v -V -m -M -s -S -w -x -X -c -C -D -p 25 -P 25 -h 5 -H 5 0 10 | Bit-identical every file written (1/1) byte for byte, with FSL’s exit status and messages | Bit-identical Every printed text with FSL’s values (the record measures every value), with FSL’s exit status and messages. | 6/6 · 4/4 |
order/mask | the options' order | -k then the outputscommand linefslstats <a: a synthetic input> -k <m3: a synthetic input> -r -R -e -E -v -V -m -M -s -S -w -x -X -c -C -D -p 25 -P 25 -h 5 -H 5 0 10 | Bit-identical every file written (2/2) byte for byte, with FSL’s exit status and messages | Bit-identical Every printed text with FSL’s values (the record measures every value), with FSL’s exit status and messages. | 6/6 · 4/4 |
order/mask-then-l | the options' order | -k then -l (the threshold replaces the mask)command linefslstats <a: a synthetic input> -k <m3: a synthetic input> -l 3 -m -V | Bit-identical every file written (2/2) byte for byte, with FSL’s exit status and messages | Bit-identical Every printed text with FSL’s values (the record measures every value), with FSL’s exit status and messages. | 6/6 · 4/4 |
order/l-then-mask | the options' order | -l then -k (the mask replaces the threshold)command linefslstats <a: a synthetic input> -l 3 -k <m3: a synthetic input> -m -V | Bit-identical every file written (2/2) byte for byte, with FSL’s exit status and messages | Bit-identical Every printed text with FSL’s values (the record measures every value), with FSL’s exit status and messages. | 6/6 · 4/4 |
order/u-only | the options' order | -u onlycommand linefslstats <a: a synthetic input> -u 4 -m -v -w | Bit-identical every file written (1/1) byte for byte, with FSL’s exit status and messages | Bit-identical Every printed text with FSL’s values (the record measures every value), with FSL’s exit status and messages. | 6/6 · 4/4 |
order/d | the options' order | -d then -m, -a, -mcommand linefslstats <a: a synthetic input> -d <d3: a synthetic input> -m -a -m | Bit-identical every file written (2/2) byte for byte, with FSL’s exit status and messages | Bit-identical Every printed text with FSL’s values (the record measures every value), with FSL’s exit status and messages. | 6/6 · 4/4 |
order/k3-4d | the options' order | a 3D mask over a 4D imagecommand linefslstats <a4: a synthetic input> -k <m3: a synthetic input> -v -V -m -p 50 | Bit-identical every file written (2/2) byte for byte, with FSL’s exit status and messages | Bit-identical Every printed text with FSL’s values (the record measures every value), with FSL’s exit status and messages. | 6/6 · 4/4 |
order/k4-4d | the options' order | a 4D maskcommand linefslstats <a4: a synthetic input> -k <m4: a synthetic input> -v -V -m -S | Bit-identical every file written (2/2) byte for byte, with FSL’s exit status and messages | Bit-identical Every printed text with FSL’s values (the record measures every value), with FSL’s exit status and messages. | 6/6 · 4/4 |
order/k4s-4d | the options' order | a 4D mask of fewer volumes (its last repeated)command linefslstats <a4: a synthetic input> -k <m4s: a synthetic input> -v -M | Bit-identical every file written (2/2) byte for byte, with FSL’s exit status and messages | Bit-identical Every printed text with FSL’s values (the record measures every value), with FSL’s exit status and messages. | 6/6 · 4/4 |
order/d3-4d | the options' order | -d of a 3D image on a 4D onecommand linefslstats <a4: a synthetic input> -d <d3: a synthetic input> -m | Bit-identical every file written (2/2) byte for byte, with FSL’s exit status and messages | Bit-identical Every printed text with FSL’s values (the record measures every value), with FSL’s exit status and messages. | 6/6 · 4/4 |
order/d4s-4d | the options' order | -d of fewer volumes (the last repeated)command linefslstats <a4: a synthetic input> -d <d4s: a synthetic input> -m | Bit-identical every file written (2/2) byte for byte, with FSL’s exit status and messages | Bit-identical Every printed text with FSL’s values (the record measures every value), with FSL’s exit status and messages. | 6/6 · 4/4 |
order/empty-mask | the options' order | thresholds that keep nothingcommand linefslstats <a: a synthetic input> -l 100 -m -M -s -S -v -V -R -r -p 50 -P 50 -h 4 -w -c | Bit-identical every file written (1/1) byte for byte, with FSL’s exit status and messages | Bit-identical Every printed text with FSL’s values (the record measures every value), with FSL’s exit status and messages. | 6/6 · 4/4 |
ts/t | per volume (-t) | -t: a line per volumecommand linefslstats -t <a4: a synthetic input> -m -M -s -v -w | Bit-identical every file written (1/1) byte for byte, with FSL’s exit status and messages | Bit-identical Every printed text with FSL’s values (the record measures every value), with FSL’s exit status and messages. | 6/6 · 4/4 |
ts/t-k3 | per volume (-t) | -t with a 3D maskcommand linefslstats -t <a4: a synthetic input> -k <m3: a synthetic input> -m -V | Bit-identical every file written (2/2) byte for byte, with FSL’s exit status and messages | Bit-identical Every printed text with FSL’s values (the record measures every value), with FSL’s exit status and messages. | 6/6 · 4/4 |
ts/t-K | per volume (-t) | -t -K: a line per volume and labelcommand linefslstats -t -K <lab: a synthetic input> <a4: a synthetic input> -m -v | Bit-identical every file written (2/2) byte for byte, with FSL’s exit status and messages | Bit-identical Every printed text with FSL’s values (the record measures every value), with FSL’s exit status and messages. | 6/6 · 4/4 |
ts/K | per volume (-t) | -K: a line per label (label 3 missing)command linefslstats -K <lab: a synthetic input> <a: a synthetic input> -m -S -w -x -C | Bit-identical every file written (2/2) byte for byte, with FSL’s exit status and messages | Bit-identical Every printed text with FSL’s values (the record measures every value), with FSL’s exit status and messages. | 6/6 · 4/4 |
ts/K-4d | per volume (-t) | -K over a 4D imagecommand linefslstats -K <lab: a synthetic input> <a4: a synthetic input> -M -v | Bit-identical every file written (2/2) byte for byte, with FSL’s exit status and messages | Bit-identical Every printed text with FSL’s values (the record measures every value), with FSL’s exit status and messages. | 6/6 · 4/4 |
ts/K-u | per volume (-t) | -K then a thresholdcommand linefslstats -K <lab: a synthetic input> <a: a synthetic input> -u 4 -m | Bit-identical every file written (2/2) byte for byte, with FSL’s exit status and messages | Bit-identical Every printed text with FSL’s values (the record measures every value), with FSL’s exit status and messages. | 6/6 · 4/4 |
ts/json-t-K | per volume (-t) | -json -t -Kcommand linefslstats -json -t -K <lab: a synthetic input> <a4: a synthetic input> -m -R -x | Bit-identical every file written (2/2) byte for byte, with FSL’s exit status and messages | Bit-identical Every printed text with FSL’s values (the record measures every value), with FSL’s exit status and messages. | 6/6 · 4/4 |
ts/json-K | per volume (-t) | -json -K with a missing labelcommand linefslstats -json -K <lab: a synthetic input> <a: a synthetic input> -m -v | Bit-identical every file written (2/2) byte for byte, with FSL’s exit status and messages | Bit-identical Every printed text with FSL’s values (the record measures every value), with FSL’s exit status and messages. | 6/6 · 4/4 |
ts/K-json | per volume (-t) | -K before -jsoncommand linefslstats -K <lab: a synthetic input> -json <a: a synthetic input> -m | Bit-identical every file written (2/2) byte for byte, with FSL’s exit status and messages | Bit-identical Every printed text with FSL’s values (the record measures every value), with FSL’s exit status and messages. | 6/6 · 4/4 |
types/u8 | data types | a u8 image (read as float)command linefslstats <u8: a synthetic input> -m -s -R -p 50 -v -r | Bit-identical every file written (1/1) byte for byte, with FSL’s exit status and messages | Bit-identical Every printed text with FSL’s values (the record measures every value), with FSL’s exit status and messages. | 6/6 · 4/4 |
types/i16 | data types | a i16 image (read as float)command linefslstats <i16: a synthetic input> -m -s -R -p 50 -v -r | Bit-identical every file written (1/1) byte for byte, with FSL’s exit status and messages | Bit-identical Every printed text with FSL’s values (the record measures every value), with FSL’s exit status and messages. | 6/6 · 4/4 |
types/i16s | data types | a i16s image (read as float)command linefslstats <i16s: a synthetic input> -m -s -R -p 50 -v -r | Bit-identical every file written (1/1) byte for byte, with FSL’s exit status and messages | Bit-identical Every printed text with FSL’s values (the record measures every value), with FSL’s exit status and messages. | 6/6 · 4/4 |
types/f64 | data types | a f64 image (read as float)command linefslstats <f64: a synthetic input> -m -s -R -p 50 -v -r | Bit-identical every file written (1/1) byte for byte, with FSL’s exit status and messages | Bit-identical Every printed text with FSL’s values (the record measures every value), with FSL’s exit status and messages. | 6/6 · 4/4 |
types/noform | data types | an image without sform or qform: -c, -C, -x, -wcommand linefslstats <anf: a synthetic input> -c -C -x -w | Bit-identical every file written (1/1) byte for byte, with FSL’s exit status and messages | Bit-identical Every printed text with FSL’s values (the record measures every value), with FSL’s exit status and messages. | 6/6 · 4/4 |
opt/json-nan | options | -json of NaN results (null)command linefslstats -json <nan: a synthetic input> -m -s -n -m | Bit-identical every file written (1/1) byte for byte, with FSL’s exit status and messages | Bit-identical Every printed text with FSL’s values (the record measures every value), with FSL’s exit status and messages. | 6/6 · 4/4 |
d13/nan-R | defects of FSL | FSL-181: a NaN first value, -Rcommand linefslstats <nan: a synthetic input> -R | Bit-identical every file written (1/1) byte for byte, with FSL’s exit status and messages; its default, | Bit-identical Every printed text with FSL’s values (the record measures every value), with FSL’s exit status and messages; its default, | 6/6 · 4/4 |
d13/nan-x | defects of FSL | FSL-181: a NaN first value, -xcommand linefslstats <nan: a synthetic input> -x | Bit-identical every file written (1/1) byte for byte, with FSL’s exit status and messages; its default, | Bit-identical Every printed text with FSL’s values (the record measures every value), with FSL’s exit status and messages; its default, | 6/6 · 4/4 |
d13/nan-X | defects of FSL | FSL-181: a NaN first value, -Xcommand linefslstats <nan: a synthetic input> -X | Bit-identical every file written (1/1) byte for byte, with FSL’s exit status and messages; its default, | Bit-identical Every printed text with FSL’s values (the record measures every value), with FSL’s exit status and messages; its default, | 6/6 · 4/4 |
d13/nan-r | defects of FSL | FSL-181: a NaN first value, -rcommand linefslstats <nan: a synthetic input> -r | Bit-identical every file written (1/1) byte for byte, with FSL’s exit status and messages; its default, | Bit-identical Every printed text with FSL’s values (the record measures every value), with FSL’s exit status and messages; its default, | 6/6 · 4/4 |
d13/nan-e | defects of FSL | FSL-181: a NaN first value, -ecommand linefslstats <nan: a synthetic input> -e | Bit-identical every file written (1/1) byte for byte, with FSL’s exit status and messages; its default, | Bit-identical Every printed text with FSL’s values (the record measures every value), with FSL’s exit status and messages; its default, | 6/6 · 4/4 |
d13/nan-E | defects of FSL | FSL-181: a NaN first value, -Ecommand linefslstats <nan: a synthetic input> -E | Bit-identical every file written (1/1) byte for byte, with FSL’s exit status and messages; its default, | Bit-identical Every printed text with FSL’s values (the record measures every value), with FSL’s exit status and messages; its default, | 6/6 · 4/4 |
d13/nan-m | defects of FSL | FSL-181: a NaN first value, -mcommand linefslstats <nan: a synthetic input> -m | Bit-identical every file written (1/1) byte for byte, with FSL’s exit status and messages | Bit-identical Every printed text with FSL’s values (the record measures every value), with FSL’s exit status and messages. | 6/6 · 4/4 |
d13/nan-M | defects of FSL | FSL-181: a NaN first value, -Mcommand linefslstats <nan: a synthetic input> -M | Bit-identical every file written (1/1) byte for byte, with FSL’s exit status and messages | Bit-identical Every printed text with FSL’s values (the record measures every value), with FSL’s exit status and messages. | 6/6 · 4/4 |
d13/nan-p | defects of FSL | FSL-181: -p 50 with NaN valuescommand linefslstats <nan: a synthetic input> -p 50 | Bit-identical every file written (1/1) byte for byte, with FSL’s exit status and messages; its default, | Bit-identical Every printed text with FSL’s values (the record measures every value), with FSL’s exit status and messages; its default, | 6/6 · 4/4 |
d13/nan-P | defects of FSL | FSL-181: -P 30 with NaN valuescommand linefslstats <nan: a synthetic input> -P 30 | Bit-identical every file written (1/1) byte for byte, with FSL’s exit status and messages | Bit-identical Every printed text with FSL’s values (the record measures every value), with FSL’s exit status and messages. | 6/6 · 4/4 |
d13/nan-h | defects of FSL | FSL-181: -h 5 with NaN valuescommand linefslstats <nan: a synthetic input> -h 5 | Bit-identical every file written (1/1) byte for byte, with FSL’s exit status and messages; its default, | Bit-identical Every printed text with FSL’s values (the record measures every value), with FSL’s exit status and messages; its default, | 6/6 · 4/4 |
d13/nan-H | defects of FSL | FSL-181: -H 5 0 10 with NaN valuescommand linefslstats <nan: a synthetic input> -H 5 0 10 | Bit-identical every file written (1/1) byte for byte, with FSL’s exit status and messages; its default, | Bit-identical Every printed text with FSL’s values (the record measures every value), with FSL’s exit status and messages; its default, | 6/6 · 4/4 |
d13/nan2-p | defects of FSL | FSL-181: -p 50 sorting NaN valuescommand linefslstats <nan2: a synthetic input> -p 50 | Bit-identical every file written (1/1) byte for byte, with FSL’s exit status and messages; its default, | Bit-identical Every printed text with FSL’s values (the record measures every value), with FSL’s exit status and messages; its default, | 6/6 · 4/4 |
d13/nan2-R | defects of FSL | FSL-181: NaN values after the firstcommand linefslstats <nan2: a synthetic input> -R -x -r | Bit-identical every file written (1/1) byte for byte, with FSL’s exit status and messages; its default, | Bit-identical Every printed text with FSL’s values (the record measures every value), with FSL’s exit status and messages; its default, | 6/6 · 4/4 |
d13/nan-n | defects of FSL | FSL-181: -n first (no defect)command linefslstats <nan: a synthetic input> -n -R -p 50 -r | Bit-identical every file written (1/1) byte for byte, with FSL’s exit status and messages | Bit-identical Every printed text with FSL’s values (the record measures every value), with FSL’s exit status and messages. | 6/6 · 4/4 |
d13/nan-k | defects of FSL | FSL-181: NaN under a maskcommand linefslstats <nan: a synthetic input> -k <m3: a synthetic input> -R -p 50 -e | Bit-identical every file written (2/2) byte for byte, with FSL’s exit status and messages; its default, | Bit-identical Every printed text with FSL’s values (the record measures every value), with FSL’s exit status and messages; its default, | 6/6 · 4/4 |
d13/const01-s | defects of FSL | FSL-182: -s of a constant imagecommand linefslstats <const01: a synthetic input> -s -S | Bit-identical every file written (1/1) byte for byte, with FSL’s exit status and messages; its default, | Bit-identical Every printed text with FSL’s values (the record measures every value), with FSL’s exit status and messages; its default, | 6/6 · 4/4 |
d13/one-s | defects of FSL | FSL-182: -s of one voxelcommand linefslstats <one: a synthetic input> -s -S | Bit-identical every file written (1/1) byte for byte, with FSL’s exit status and messages; its default, | Bit-identical Every printed text with FSL’s values (the record measures every value), with FSL’s exit status and messages; its default, | 6/6 · 4/4 |
d13/S | defects of FSL | FSL-182: -S without a maskcommand linefslstats <a: a synthetic input> -S | Bit-identical every file written (1/1) byte for byte, with FSL’s exit status and messages | Bit-identical Every printed text with FSL’s values (the record measures every value), with FSL’s exit status and messages. | 6/6 · 4/4 |
d13/t-k4 | defects of FSL | FSL-183: -t with a 4D maskcommand linefslstats -t <a4: a synthetic input> -k <m4: a synthetic input> -m | Rejected by both fslstats exits 3; the same from the replica. Mask and image must be the same size The replica’s default, | Rejected by both fslstats exits 3; the same from the clean room. Mask and image must be the same size The clean room’s default, | 6/6 · 4/4 |
d13/t-d3 | defects of FSL | FSL-183: -t with a 3D -d imagecommand linefslstats -t <a4: a synthetic input> -d <d3: a synthetic input> -m | Rejected by both fslstats exits 255; the same from the replica. Image Exception : #61 :: Invalid t index in [] operator Invalid t index in [] operator The replica’s default, | Rejected by both fslstats exits 255; the same from the clean room. Image Exception : #61 :: Invalid t index in [] operator Invalid t index in [] operator The clean room’s default, | 6/6 · 4/4 |
d13/t-d4 | defects of FSL | FSL-183: -t with a 4D -d imagecommand linefslstats -t <a4: a synthetic input> -d <d4: a synthetic input> -m | Rejected by both fslstats exits 3; the same from the replica. Image must be the same size as the base image The replica’s default, | Rejected by both fslstats exits 3; the same from the clean room. Image must be the same size as the base image The clean room’s default, | 6/6 · 4/4 |
d13/x-empty | defects of FSL | FSL-184: -x of an empty maskcommand linefslstats <a: a synthetic input> -l 1e30 -x | Rejected by both fslstats exits -11; the same from the replica. calculateExtrema: mask is empty The replica’s default, | Rejected by both fslstats exits -11; the same from the clean room. calculateExtrema: mask is empty The clean room’s default, | 6/6 · 4/4 |
d13/X-empty | defects of FSL | FSL-184: -X of an empty maskcommand linefslstats <a: a synthetic input> -m -u -1e30 -X | Rejected by both fslstats exits -11; the same from the replica. calculateExtrema: mask is empty The replica’s default, | Rejected by both fslstats exits -11; the same from the clean room. calculateExtrema: mask is empty The clean room’s default, | 6/6 · 4/4 |
d13/e-const | defects of FSL | FSL-185: -e of a constant imagecommand linefslstats <const: a synthetic input> -e | Rejected by both fslstats exits -8; the same from the replica. The replica’s default, | Rejected by both fslstats exits -8; the same from the clean room. The clean room’s default, | 6/6 · 4/4 |
d13/E-const | defects of FSL | FSL-185: -m -E -m of a constant imagecommand linefslstats <const: a synthetic input> -m -E -m | Rejected by both fslstats exits -8; the same from the replica. The replica’s default, | Rejected by both fslstats exits -8; the same from the clean room. The clean room’s default, | 6/6 · 4/4 |
d13/h-const | defects of FSL | -h of a constant image (no range: nothing printed)command linefslstats <const: a synthetic input> -h 4 | Bit-identical every file written (1/1) byte for byte, with FSL’s exit status and messages | Bit-identical Every printed text with FSL’s values (the record measures every value), with FSL’s exit status and messages. | 6/6 · 4/4 |
d13/H-equal | defects of FSL | FSL-186: -H 5 3 3command linefslstats <a: a synthetic input> -H 5 3 3 | Bit-identical every file written (1/1) byte for byte, with FSL’s exit status and messages; its default, | Bit-identical Every printed text with FSL’s values (the record measures every value), with FSL’s exit status and messages; its default, | 6/6 · 4/4 |
d13/H-reversed | defects of FSL | FSL-186: -H 5 4 1command linefslstats <a: a synthetic input> -m -H 5 4 1 -M | Bit-identical every file written (1/1) byte for byte, with FSL’s exit status and messages; its default, | Bit-identical Every printed text with FSL’s values (the record measures every value), with FSL’s exit status and messages; its default, | 6/6 · 4/4 |
d13/H-far | defects of FSL | FSL-187: -H 10 0 1 with a value of 1e12command linefslstats <outl: a synthetic input> -H 10 0 1 | Bit-identical every file written (1/1) byte for byte, with FSL’s exit status and messages; its default, | Bit-identical Every printed text with FSL’s values (the record measures every value), with FSL’s exit status and messages; its default, | 6/6 · 4/4 |
d13/e-far | defects of FSL | FSL-187: -e with a value of 1e12command linefslstats <outl: a synthetic input> -e -E -r | Bit-identical every file written (1/1) byte for byte, with FSL’s exit status and messages; its default, | Bit-identical Every printed text with FSL’s values (the record measures every value), with FSL’s exit status and messages; its default, | 6/6 · 4/4 |
d13/w-zeros4 | defects of FSL | FSL-188: -w of an all-zero 4D imagecommand linefslstats <zeros: a synthetic input> -w | Bit-identical every file written (1/1) byte for byte, with FSL’s exit status and messages; its default, | Bit-identical Every printed text with FSL’s values (the record measures every value), with FSL’s exit status and messages; its default, | 6/6 · 4/4 |
d13/w-zeros3 | defects of FSL | -w of an all-zero 3D imagecommand linefslstats <zeros3: a synthetic input> -w | Bit-identical every file written (1/1) byte for byte, with FSL’s exit status and messages | Bit-identical Every printed text with FSL’s values (the record measures every value), with FSL’s exit status and messages. | 6/6 · 4/4 |
d13/json-v-big | defects of FSL | FSL-189: -json -v beyond 2^24 voxelscommand linefslstats -json <bigcount: a synthetic input> -v -V | Bit-identical every file written (1/1) byte for byte, with FSL’s exit status and messages; its default, | Bit-identical Every printed text with FSL’s values (the record measures every value), with FSL’s exit status and messages; its default, | 6/6 · 4/4 |
d13/json-v-replaced | defects of FSL | FSL-189 not met: the -v beyond 2^24 voxels replaced by a later -vcommand linefslstats -json <bigcount: a synthetic input> -v -l 0.5 -v -V | Bit-identical every file written (1/1) byte for byte, with FSL’s exit status and messages | Bit-identical Every printed text with FSL’s values (the record measures every value), with FSL’s exit status and messages. | 6/6 · 4/4 |
d13/v-big | defects of FSL | -v -V beyond 2^24 voxels (text)command linefslstats <bigcount: a synthetic input> -v -V | Bit-identical every file written (1/1) byte for byte, with FSL’s exit status and messages | Bit-identical Every printed text with FSL’s values (the record measures every value), with FSL’s exit status and messages. | 6/6 · 4/4 |
fsltest/robust/-r | FSL's own tests | FSL's test robust: fslstats test.nii.gz -rcommand linefslstats %test.nii.gz -r | Bit-identical every file written (1/1) byte for byte, with FSL’s exit status and messages | – | 7/7 |
fsltest/json/robust/-r | FSL's own tests | FSL's JSON test robust: fslstats -json test_4d.nii.gz -rcommand linefslstats -json %test_4d.nii.gz -r | Bit-identical every file written (1/1) byte for byte, with FSL’s exit status and messages | – | 7/7 |
fsltest/notRobust/-R | FSL's own tests | FSL's test notRobust: fslstats test.nii.gz -Rcommand linefslstats %test.nii.gz -R | Bit-identical every file written (1/1) byte for byte, with FSL’s exit status and messages | – | 7/7 |
fsltest/json/notRobust/-R | FSL's own tests | FSL's JSON test notRobust: fslstats -json test_4d.nii.gz -Rcommand linefslstats -json %test_4d.nii.gz -R | Bit-identical every file written (1/1) byte for byte, with FSL’s exit status and messages | – | 7/7 |
fsltest/entropy/-e | FSL's own tests | FSL's test entropy: fslstats test.nii.gz -ecommand linefslstats %test.nii.gz -e | Bit-identical every file written (1/1) byte for byte, with FSL’s exit status and messages | – | 7/7 |
fsltest/json/entropy/-e | FSL's own tests | FSL's JSON test entropy: fslstats -json test_4d.nii.gz -ecommand linefslstats -json %test_4d.nii.gz -e | Bit-identical every file written (1/1) byte for byte, with FSL’s exit status and messages | – | 7/7 |
fsltest/entropyNonzero/-E | FSL's own tests | FSL's test entropyNonzero: fslstats test.nii.gz -Ecommand linefslstats %test.nii.gz -E | Bit-identical every file written (1/1) byte for byte, with FSL’s exit status and messages | – | 7/7 |
fsltest/json/entropyNonzero/-E | FSL's own tests | FSL's JSON test entropyNonzero: fslstats -json test_4d.nii.gz -Ecommand linefslstats -json %test_4d.nii.gz -E | Bit-identical every file written (1/1) byte for byte, with FSL’s exit status and messages | – | 7/7 |
fsltest/volume/-v | FSL's own tests | FSL's test volume: fslstats test.nii.gz -vcommand linefslstats %test.nii.gz -v | Bit-identical every file written (1/1) byte for byte, with FSL’s exit status and messages | – | 7/7 |
fsltest/json/volume/-v | FSL's own tests | FSL's JSON test volume: fslstats -json test_4d.nii.gz -vcommand linefslstats -json %test_4d.nii.gz -v | Bit-identical every file written (1/1) byte for byte, with FSL’s exit status and messages | – | 7/7 |
fsltest/volumeNonzero/-V | FSL's own tests | FSL's test volumeNonzero: fslstats test.nii.gz -Vcommand linefslstats %test.nii.gz -V | Bit-identical every file written (1/1) byte for byte, with FSL’s exit status and messages | – | 7/7 |
fsltest/json/volumeNonzero/-V | FSL's own tests | FSL's JSON test volumeNonzero: fslstats -json test_4d.nii.gz -Vcommand linefslstats -json %test_4d.nii.gz -V | Bit-identical every file written (1/1) byte for byte, with FSL’s exit status and messages | – | 7/7 |
fsltest/mean/-m | FSL's own tests | FSL's test mean: fslstats test.nii.gz -mcommand linefslstats %test.nii.gz -m | Bit-identical every file written (1/1) byte for byte, with FSL’s exit status and messages | – | 7/7 |
fsltest/json/mean/-m | FSL's own tests | FSL's JSON test mean: fslstats -json test_4d.nii.gz -mcommand linefslstats -json %test_4d.nii.gz -m | Bit-identical every file written (1/1) byte for byte, with FSL’s exit status and messages | – | 7/7 |
fsltest/mean/-m_-a | FSL's own tests | FSL's test mean: fslstats test.nii.gz -m -acommand linefslstats %test.nii.gz -m -a | Bit-identical every file written (1/1) byte for byte, with FSL’s exit status and messages | – | 7/7 |
fsltest/json/mean/-m_-a | FSL's own tests | FSL's JSON test mean: fslstats -json test_4d.nii.gz -m -acommand linefslstats -json %test_4d.nii.gz -m -a | Bit-identical every file written (1/1) byte for byte, with FSL’s exit status and messages | – | 7/7 |
fsltest/mean/-m_-a_-n | FSL's own tests | FSL's test mean: fslstats test.nii.gz -m -a -ncommand linefslstats %test.nii.gz -m -a -n | Bit-identical every file written (1/1) byte for byte, with FSL’s exit status and messages | – | 7/7 |
fsltest/json/mean/-m_-a_-n | FSL's own tests | FSL's JSON test mean: fslstats -json test_4d.nii.gz -m -a -ncommand linefslstats -json %test_4d.nii.gz -m -a -n | Bit-identical every file written (1/1) byte for byte, with FSL’s exit status and messages | – | 7/7 |
fsltest/meanNonzero/-M | FSL's own tests | FSL's test meanNonzero: fslstats test.nii.gz -Mcommand linefslstats %test.nii.gz -M | Bit-identical every file written (1/1) byte for byte, with FSL’s exit status and messages | – | 7/7 |
fsltest/json/meanNonzero/-M | FSL's own tests | FSL's JSON test meanNonzero: fslstats -json test_4d.nii.gz -Mcommand linefslstats -json %test_4d.nii.gz -M | Bit-identical every file written (1/1) byte for byte, with FSL’s exit status and messages | – | 7/7 |
fsltest/stdev/-s | FSL's own tests | FSL's test stdev: fslstats test.nii.gz -scommand linefslstats %test.nii.gz -s | Bit-identical every file written (1/1) byte for byte, with FSL’s exit status and messages | – | 7/7 |
fsltest/json/stdev/-s | FSL's own tests | FSL's JSON test stdev: fslstats -json test_4d.nii.gz -scommand linefslstats -json %test_4d.nii.gz -s | Bit-identical every file written (1/1) byte for byte, with FSL’s exit status and messages | – | 7/7 |
fsltest/stdevNonzero/-S | FSL's own tests | FSL's test stdevNonzero: fslstats test.nii.gz -Scommand linefslstats %test.nii.gz -S | Bit-identical every file written (1/1) byte for byte, with FSL’s exit status and messages | – | 7/7 |
fsltest/json/stdevNonzero/-S | FSL's own tests | FSL's JSON test stdevNonzero: fslstats -json test_4d.nii.gz -Scommand linefslstats -json %test_4d.nii.gz -S | Bit-identical every file written (1/1) byte for byte, with FSL’s exit status and messages; its default, | – | 7/7 |
fsltest/roi/-w | FSL's own tests | FSL's test roi: fslstats test.nii.gz -wcommand linefslstats %test.nii.gz -w | Bit-identical every file written (1/1) byte for byte, with FSL’s exit status and messages | – | 7/7 |
fsltest/json/roi/-w | FSL's own tests | FSL's JSON test roi: fslstats -json test_4d.nii.gz -wcommand linefslstats -json %test_4d.nii.gz -w | Bit-identical every file written (1/1) byte for byte, with FSL’s exit status and messages | – | 7/7 |
fsltest/maxCoord/-x | FSL's own tests | FSL's test maxCoord: fslstats test.nii.gz -xcommand linefslstats %test.nii.gz -x | Bit-identical every file written (1/1) byte for byte, with FSL’s exit status and messages | – | 7/7 |
fsltest/json/maxCoord/-x | FSL's own tests | FSL's JSON test maxCoord: fslstats -json test_4d.nii.gz -xcommand linefslstats -json %test_4d.nii.gz -x | Bit-identical every file written (1/1) byte for byte, with FSL’s exit status and messages | – | 7/7 |
fsltest/minCoord/-X | FSL's own tests | FSL's test minCoord: fslstats test.nii.gz -Xcommand linefslstats %test.nii.gz -X | Bit-identical every file written (1/1) byte for byte, with FSL’s exit status and messages | – | 7/7 |
fsltest/json/minCoord/-X | FSL's own tests | FSL's JSON test minCoord: fslstats -json test_4d.nii.gz -Xcommand linefslstats -json %test_4d.nii.gz -X | Bit-identical every file written (1/1) byte for byte, with FSL’s exit status and messages | – | 7/7 |
fsltest/cogMM/-c | FSL's own tests | FSL's test cogMM: fslstats test.nii.gz -ccommand linefslstats %test.nii.gz -c | Bit-identical every file written (1/1) byte for byte, with FSL’s exit status and messages | – | 7/7 |
fsltest/json/cogMM/-c | FSL's own tests | FSL's JSON test cogMM: fslstats -json test_4d.nii.gz -ccommand linefslstats -json %test_4d.nii.gz -c | Bit-identical every file written (1/1) byte for byte, with FSL’s exit status and messages | – | 7/7 |
fsltest/cogVox/-C | FSL's own tests | FSL's test cogVox: fslstats test.nii.gz -Ccommand linefslstats %test.nii.gz -C | Bit-identical every file written (1/1) byte for byte, with FSL’s exit status and messages | – | 7/7 |
fsltest/json/cogVox/-C | FSL's own tests | FSL's JSON test cogVox: fslstats -json test_4d.nii.gz -Ccommand linefslstats -json %test_4d.nii.gz -C | Bit-identical every file written (1/1) byte for byte, with FSL’s exit status and messages | – | 7/7 |
fsltest/percentile/-p_50 | FSL's own tests | FSL's test percentile: fslstats test.nii.gz -p 50command linefslstats %test.nii.gz -p 50 | Bit-identical every file written (1/1) byte for byte, with FSL’s exit status and messages | – | 7/7 |
fsltest/json/percentile/-p_50 | FSL's own tests | FSL's JSON test percentile: fslstats -json test_4d.nii.gz -p 50command linefslstats -json %test_4d.nii.gz -p 50 | Bit-identical every file written (1/1) byte for byte, with FSL’s exit status and messages | – | 7/7 |
fsltest/percentileNonzero/-P_50 | FSL's own tests | FSL's test percentileNonzero: fslstats test.nii.gz -P 50command linefslstats %test.nii.gz -P 50 | Bit-identical every file written (1/1) byte for byte, with FSL’s exit status and messages | – | 7/7 |
fsltest/json/percentileNonzero/-P_50 | FSL's own tests | FSL's JSON test percentileNonzero: fslstats -json test_4d.nii.gz -P 50command linefslstats -json %test_4d.nii.gz -P 50 | Bit-identical every file written (1/1) byte for byte, with FSL’s exit status and messages | – | 7/7 |
fsltest/meanHistCog/-m_-h_10_-c | FSL's own tests | FSL's test meanHistCog: fslstats test.nii.gz -m -h 10 -ccommand linefslstats %test.nii.gz -m -h 10 -c | Bit-identical every file written (1/1) byte for byte, with FSL’s exit status and messages | – | 7/7 |
fsltest/json/meanHistCog/-m_-h_10_-c | FSL's own tests | FSL's JSON test meanHistCog: fslstats -json test_4d.nii.gz -m -h 10 -ccommand linefslstats -json %test_4d.nii.gz -m -h 10 -c | Bit-identical every file written (1/1) byte for byte, with FSL’s exit status and messages | – | 7/7 |
fsltest/meanHist/-m_-h_10 | FSL's own tests | FSL's test meanHist: fslstats test.nii.gz -m -h 10command linefslstats %test.nii.gz -m -h 10 | Bit-identical every file written (1/1) byte for byte, with FSL’s exit status and messages | – | 7/7 |
fsltest/json/meanHist/-m_-h_10 | FSL's own tests | FSL's JSON test meanHist: fslstats -json test_4d.nii.gz -m -h 10command linefslstats -json %test_4d.nii.gz -m -h 10 | Bit-identical every file written (1/1) byte for byte, with FSL’s exit status and messages | – | 7/7 |
fsltest/hist/-h_10 | FSL's own tests | FSL's test hist: fslstats test.nii.gz -h 10command linefslstats %test.nii.gz -h 10 | Bit-identical every file written (1/1) byte for byte, with FSL’s exit status and messages | – | 7/7 |
fsltest/json/hist/-h_10 | FSL's own tests | FSL's JSON test hist: fslstats -json test_4d.nii.gz -h 10command linefslstats -json %test_4d.nii.gz -h 10 | Bit-identical every file written (1/1) byte for byte, with FSL’s exit status and messages | – | 7/7 |
fsltest/histLimits/-H_10_0_1 | FSL's own tests | FSL's test histLimits: fslstats test.nii.gz -H 10 0 1command linefslstats %test.nii.gz -H 10 0 1 | Bit-identical every file written (1/1) byte for byte, with FSL’s exit status and messages | – | 7/7 |
fsltest/json/histLimits/-H_10_0_1 | FSL's own tests | FSL's JSON test histLimits: fslstats -json test_4d.nii.gz -H 10 0 1command linefslstats -json %test_4d.nii.gz -H 10 0 1 | Bit-identical every file written (1/1) byte for byte, with FSL’s exit status and messages | – | 7/7 |
fsltest/threshold/-l_0.25_-u_0.75_-m | FSL's own tests | FSL's test threshold: fslstats test.nii.gz -l 0.25 -u 0.75 -mcommand linefslstats %test.nii.gz -l 0.25 -u 0.75 -m | Bit-identical every file written (1/1) byte for byte, with FSL’s exit status and messages | – | 7/7 |
fsltest/json/threshold/-l_0.25_-u_0.75_-m | FSL's own tests | FSL's JSON test threshold: fslstats -json test_4d.nii.gz -l 0.25 -u 0.75 -mcommand linefslstats -json %test_4d.nii.gz -l 0.25 -u 0.75 -m | Bit-identical every file written (1/1) byte for byte, with FSL’s exit status and messages | – | 7/7 |
fsltest/diff/-d_imageForDiff.nii.gz_-m | FSL's own tests | FSL's test diff: fslstats test.nii.gz -d imageForDiff.nii.gz -mcommand linefslstats %test.nii.gz -d %imageForDiff.nii.gz -m | Bit-identical every file written (2/2) byte for byte, with FSL’s exit status and messages | – | 7/7 |
fsltest/json/diff/-d_imageForDiff.nii.gz_-m | FSL's own tests | FSL's JSON test diff: fslstats -json test_4d.nii.gz -d imageForDiff.nii.gz -mcommand linefslstats -json %test_4d.nii.gz -d %imageForDiff.nii.gz -m | Bit-identical every file written (2/2) byte for byte, with FSL’s exit status and messages | – | 7/7 |
fsltest/preopIndexMaskMean/-K_-m | FSL's own tests | FSL's test preopIndexMaskMean: fslstats -K mask.nii.gz test_4d.nii.gz -mcommand linefslstats -K %mask.nii.gz %test_4d.nii.gz -m | Bit-identical every file written (2/2) byte for byte, with FSL’s exit status and messages | – | 7/7 |
fsltest/json/preopIndexMaskMean/-K_-m | FSL's own tests | FSL's JSON test preopIndexMaskMeancommand linefslstats -json -K %mask.nii.gz %test_4d.nii.gz -m | Bit-identical every file written (2/2) byte for byte, with FSL’s exit status and messages | – | 7/7 |
fsltest/preopIndexMaskMeanTimeSeries/-t_-K_-m | FSL's own tests | FSL's test preopIndexMaskMeanTimeSeries: fslstats -t -K mask.nii.gz test_4d.nii.gz -mcommand linefslstats -t -K %mask.nii.gz %test_4d.nii.gz -m | Bit-identical every file written (2/2) byte for byte, with FSL’s exit status and messages | – | 7/7 |
fsltest/json/preopIndexMaskMeanTimeSeries/-t_-K_-m | FSL's own tests | FSL's JSON test preopIndexMaskMeanTimeSeriescommand linefslstats -json -t -K %mask.nii.gz %test_4d.nii.gz -m | Bit-identical every file written (2/2) byte for byte, with FSL’s exit status and messages | – | 7/7 |
fsltest/preopMeanTimeSeries/-t_-m | FSL's own tests | FSL's test preopMeanTimeSeries: fslstats -t test_4d.nii.gz -mcommand linefslstats -t %test_4d.nii.gz -m | Bit-identical every file written (1/1) byte for byte, with FSL’s exit status and messages | – | 7/7 |
fsltest/json/preopMeanTimeSeries/-t_-m | FSL's own tests | FSL's JSON test preopMeanTimeSeriescommand linefslstats -json -t %test_4d.nii.gz -m | Bit-identical every file written (1/1) byte for byte, with FSL’s exit status and messages | – | 7/7 |
difftest/cog-nan-sign-mm | random testing | random testing (2026-11-03): -E -c of an image holding NaN and infinities: the centre of gravity's NaN signs in millimetres (as cog-nan-sign-voxels)command linefslstats <random testing's input case/fsl-sta> -E -c | Bit-identical every file written (1/1) byte for byte, with FSL’s exit status and messages | – | 6/6 |
difftest/cog-nan-sign-voxels | random testing | random testing (2026-11-03): -l 0.001 -C (BET's form) of an image holding NaN and infinities: the centre of gravity's NaN signs; FSL's build adds each block's partial sums into the totals with the partial sum as addsd's destination, which the replica now followscommand linefslstats <random testing's input case/fsl-sta> -l 0.001 -C | Bit-identical every file written (1/1) byte for byte, with FSL’s exit status and messages | – | 6/6 |
difftest/json-notices-before-refusal | random testing | random testing (2026-11-03): -json -E -k <mask> -X of a 1 x 1 x 1 x 2 image: -E's correction (FSL-185) was named only when the JSON was printed, and -X's refusal (FSL-184) ended the run first; the notices of the options before a refusal are now printedcommand linefslstats -json <random testing's input case/fsl-sta> -E -k <random testing's input case/fsl-sta> -X | Rejected by both fslstats exits -8; the same from the replica. findHistogram: mask is empty The replica’s default, | – | 6/6 |
orig/P-makes-masks | the clean room's own cases | -P makes the masks from the thresholds and multiplies the image by them (+inf becomes NaN for the later -D)command linefslstats <rampinf: a synthetic input of the clean room's suite> -P 50 -D | – | Bit-identical Every printed text with FSL’s values (the record measures every value), with FSL’s exit status and messages. | 4/4 |
orig/w-makes-masks | the clean room's own cases | -w makes the masks likewisecommand linefslstats <rampinf: a synthetic input of the clean room's suite> -w -D | – | Bit-identical Every printed text with FSL’s values (the record measures every value), with FSL’s exit status and messages. | 4/4 |
orig/e-makes-masks | the clean room's own cases | -e makes the masks likewisecommand linefslstats <rampinf: a synthetic input of the clean room's suite> -e -D | – | Bit-identical Every printed text with FSL’s values (the record measures every value), with FSL’s exit status and messages; its default, | 4/4 |
orig/zeros-M | the clean room's own cases | -M without nonzero values (0, no message)command linefslstats <zeros3: a synthetic input> -M | – | Bit-identical Every printed text with FSL’s values (the record measures every value), with FSL’s exit status and messages. | 4/4 |
orig/zeros-sS | the clean room's own cases | -m, -s, -S, -V without nonzero valuescommand linefslstats <zeros3: a synthetic input> -m -s -S -V | – | Bit-identical Every printed text with FSL’s values (the record measures every value), with FSL’s exit status and messages. | 4/4 |
orig/json-K-none | the clean room's own cases | -json -K without a positive label: an empty list of indicescommand linefslstats -json -K <labneg: a synthetic input> <a: a synthetic input> -m | – | Bit-identical Every printed text with FSL’s values (the record measures every value), with FSL’s exit status and messages. | 4/4 |
orig/e-empty-mask | the clean room's own cases | -l 100 -e -E: the histogram's message, then FSL-185 (FSL crashes)command linefslstats <a: a synthetic input> -l 100 -e -E | – | Rejected by both fslstats exits -8; the same from the clean room. findHistogram: mask is empty The clean room’s default, | 4/4 |
orig/p-nan | the clean room's own cases | -p nan -P nan: the smallest valuecommand linefslstats <a: a synthetic input> -p nan -P nan | – | Bit-identical Every printed text with FSL’s values (the record measures every value), with FSL’s exit status and messages. | 4/4 |
orig/t-3d | the clean room's own cases | -t on a 3D image: one passcommand linefslstats -t <a: a synthetic input> -m | – | Bit-identical Every printed text with FSL’s values (the record measures every value), with FSL’s exit status and messages. | 4/4 |
difftest/histogram-empty-mask-and-range | random testing | -h with an empty mask and an empty range: no histogram (findings 28)command linefslstats <the case's img> -k <the case's i1> -h 10 -m -H 10 0 100 | – | Bit-identical Every printed text with FSL’s values (the record measures every value), with FSL’s exit status and messages. | 4/4 |
difftest/histogram-empty-mask | random testing | -H with an empty mask: the message, then the histogram of zeros (findings 28)command linefslstats <the case's img> -k <the case's i1> -H 20 -50 50 | – | Bit-identical Every printed text with FSL’s values (the record measures every value), with FSL’s exit status and messages. | 4/4 |
difftest/json-histogram-empty-mask | random testing | -json -H with an empty mask: the zeros (findings 28)command linefslstats -json <the case's img> -k <the case's i1> -H 5 10 20 | – | Bit-identical Every printed text with FSL’s values (the record measures every value), with FSL’s exit status and messages. | 4/4 |
difftest/json-no-histogram | random testing | -json -h of a constant image: an empty list (findings 28)command linefslstats -json <the case's img> -h 32 | – | Bit-identical Every printed text with FSL’s values (the record measures every value), with FSL’s exit status and messages. | 4/4 |
Speed
Reading the image is most of fslstats’ time.
- On BET’s call on fMRIPrep’s preprocessed T1w the clean room takes 0.45 s on one thread and 0.29 s on 14, against FSL’s 0.58 s.
- On 63 volumes of a BOLD series (
-t -M -S -r) it takes 0.22 s against FSL’s 0.23 s, with less memory than FSL (41 MiB against 47). - The replica takes 0.34 and 0.23 s.
These timings come from the report, shared with fslmaths. They are informal: one run each, on a machine running other work beside them.
fslstats 6.0.7.23Seconds for the whole call (reading the image, computing, printing), one run each, on a log scale. The factor is how many times faster the clean room is than FSL, both on one thread.
- FSL fslstats 6.0.7.23, 1 thread
- replica, 1 thread
- clean room, 1 thread
- clean room, 14 threads
- BET's fslstats <T1w> -l 0.001 -CFSL fslstats 6.0.7.23, 1 thread 0.58 sreplica, 1 thread 0.34 sclean room, 1 thread 0.45 sclean room, 14 threads 0.29 s1.3×
- fslstats -t <BOLD> -M -S -rFSL fslstats 6.0.7.23, 1 thread 0.23 sreplica, 1 thread 0.23 sclean room, 1 thread 0.22 sclean room, 14 threads 0.23 s1×
From the benchmark report docs/benchmarks/fsl-maths.md (the main machine: AMD, 16 cores and 32 threads, 124 GiB,
Ubuntu 22.04; informal, one run each, while other work ran beside it). FSL and the replica are single-threaded; the clean room’s outputs are the same bits at 1 and 14 threads.
Wall-clock seconds and peak memory, both ports against the original: FSL fslstats 6.0.7.23 (the benchmark report)
| Call | FSL 6.0.7.23 | replica (1 thread) | clean room (1 thread) | clean room (14 threads) | The clean room's checks |
|---|---|---|---|---|---|
| BET’s fslstats | 0.58 s (315 MiB) | 0.34 s (245 MiB) | 0.45 s (278 MiB) | 0.29 s (277 MiB) | 1 = 14 threads; 1 of 3 numbers differs, 6.1e-8 relative (findings 21) |
| fslstats -t | 0.23 s (47 MiB) | 0.23 s (37 MiB) | 0.22 s (41 MiB) | 0.23 s (43 MiB) | 1 = 14 threads; identical with the final build (checked again on 2026-11-04; on 2026-11-03 54 of 252 numbers differed: -S’s last digits, at most 3.0e-10 relative) |
The benchmark report docs/benchmarks/fsl-maths.md: wall-clock seconds of the whole program and its peak resident memory (MiB), one run each on the main machine with other work beside it (informal). The memory rule (at most 10 % above FSL’s peak plus 8 MiB) is checked at one thread by tests/parity/test_memory_peak.py; on 14 threads a .nii.gz output adds about 3 MiB per worker (the shared parallel gzip writer).
Corrections by default
The replica corrects FSL’s deterministic defects by default, fix, and warns. upstream_defects="reproduce" (on the command line --upstream-defects reproduce from the next release, LARMORX_UPSTREAM_DEFECTS=reproduce in 0.1.0rc1) gives FSL’s output byte for byte, where FSL’s output is defined (register). Where FSL crashes, the replica refuses in fix and in reproduce, or gives a defined result.
- NaN values are left out of the order statistics:
-R,-x,-X, the percentiles, the histograms and the robust range (FSL-181). - Without a mask,
-sand-Stake the masked forms: the variance clamped at 0, and 0 for a single value;-S’s squares in double precision (FSL-182). - With
-t, a 4D-kor-dimage gives each time point its volume (FSL-183). -xand-Xof a mask without voxels are refused infixand inreproduce, where FSL crashes (FSL-184).-eand-Eof an image whose robust range is empty give the entropy 0 instead of crashing (FSL-185).-Hwith a maximum not above its minimum is an error, where FSL prints nothing (FSL-186).- A value more than about two billion bin widths above a histogram’s range counts in its last bin (FSL-187:
-H,-e,-E,-r; shared with fslmaths, BET and FLIRT). -wof a 4D image without nonzero voxels gives the whole time range (FSL-188).-jsonwrites voxel counts exactly, where FSL rounds them to single precision above 16,777,216 (FSL-189).
The clean room makes the same corrections by default, with the same notices (FSL-181 to FSL-189). Its reproduce follows FSL where FSL’s output is defined. Where FSL crashes, its reproduce prints what FSL’s buffer had written before the crash and ends with exit status 1.
Known limits
Both ports are experimental. The replica’s record’s standard comparison holds fMRIPrep’s and BET’s calls; its full comparison, the data panel and the long random-testing runs come in the final validation phase.
The clean room is held to §10’s bound for the numbers FSL sums without a mask and for the centres of gravity (BET’s call: 6 × 10−8 relative). FSL’s own tests of fslstats are not among its cases, as they read FSL’s source tree; they may be run against it later, as a check outside the clean room.
The goodvoxels calls use a stand-in for the cortical ribbon. They are to be checked again with a real ribbon once an fMRIPrep run with FreeSurfer’s reconstruction exists.
Images compressed with zstd or bzip2 are decompressed whole before they are read.
The cross-platform checks (how they work) hold the other five platforms to LARMORX’s own Linux output. The benchmark is informal: one run each, on a shared machine.
History
- 2026-11-03: the replica, translated from FSL 6.0.7.23’s source, its record of 208 cases and its random-testing run, 69,077 fslstats calls beside fslmaths’. The clean room, written from specs/fslstats.md, FSL’s usage text and documentation and runs of FSL, and its random-testing run, 150,000 option lists in 20 minutes beside fslmaths’.
- 2026-11-04: the clean room complete: every option (the roadmap). Its
reproducecomputes the entropies’ logarithms as glibc 2.35 does (GLIBC-07); no printed number of its record moved. The clean room’s record, 162 cases, dates from that day.
Data credits
The data this page shows or names: each dataset with its version, DOI and licence, from LARMORX's test-data catalog. Public-domain dedications (CC0, PDDL) ask nothing; the datasets are cited all the same.
- Political Moralization (OpenNeuro ds005040, version 1.2.0, doi:10.18112/openneuro.ds005040.v1.2.0), CC0 1.0 public-domain dedication.