Evidence · AFNI
3dTshift
3dTshift shifts each slice’s time series to one common time. LARMORX has two ports of it, both in larmorx itself. Of the 317 cases of its record, the replica gives AFNI 26.3.05’s bytes in 282; both programs refuse 32, and 3 are expected divergences. Of its own 317, the clean room gives AFNI’s bytes in 180 and differs in 102 only by the last bits of its Fourier shift, within the record’s thresholds. On fMRIPrep’s call the replica gives AFNI’s and fMRIPrep’s output bit for bit. Both ports correct AFNI’s negative scale factor defect (AFNI-01) by default.
- Ports
- replica
larmorxApache-2.0, with CC BY 4.0's attribution for the Medical College of Wisconsin's code: translated from AFNI's source; inpip install larmorxsince 2026-10-29, until then the separate GPL packagelarmorx-gpl - clean room
larmorxApache-2.0: written from specs/3dTshift.md
- replica
- Status
- replica validated; clean room validated (marked before the statuses' definition)
- Records
- the replica's: standard comparison (AFNI 26.3.05) · the clean room's: standard comparison (AFNI 26.3.05) · benchmark afni-tshift
- Reference
3dTshift· API page afni-tshift
What is compared
3dTshift shifts each slice’s time series to a common time, so that the slices of a volume acquired at different moments can be treated as simultaneous. fMRIPrep calls it with the slice times of the BIDS sidecar and -tzero at the middle of the acquisition, with AFNI’s default Fourier interpolation.
The two ports run beside AFNI 26.3.05’s 3dTshift and AFNI 25.2.09’s on the same files with the same arguments, both AFNI releases the repository’s builds; fMRIPrep’s own output is the file it wrote in its run.
larmorx afni 3dTshift -ignore 0 -tpattern @slice_timing.1D -TR 2s -tzero 0.975 -prefix bold_stc.nii.gz bold.nii.gzimport json
import larmorx as lx
meta = json.load(open("sub-01_task-rest_bold.json"))
times, t0 = lx.afni.fmriprep_slice_timing(meta["SliceTiming"], meta.get("SliceEncodingDirection"))
stc = lx.afni.tshift("sub-01_task-rest_bold.nii.gz", slice_times=times, tzero=t0,
tr=meta["RepetitionTime"], n_threads=8)The call above leaves implementation at "auto". The API page maps every option. How to read what follows: how to read the evidence.
Its two ports
Since 2026-10-29 both ports are part of LARMORX itself (pip install larmorx). AFNI 26.3.05 releases the Medical College of Wisconsin’s code, which these programs’ results depend on, under CC BY 4.0. So the replica moved from the separate GPL package larmorx-gpl into LARMORX, under the Apache License with CC BY 4.0’s attribution (NOTICE, licensing), and runs in the same process. The replica is translated from AFNI’s source. The clean room is written without it, from a description of what the program does (specs/3dTshift.md).
implementation="auto" | "replica" | "clean-room" chooses between them ("original" in 0.1.0rc1). On the command line, larmorx --implementation clean-room afni 3dTshift ... does the same from the next release; in 0.1.0rc1 it is the environment variable LARMORX_IMPLEMENTATION. auto takes the replica (before 2026-10-29 only where larmorx-gpl was installed, the clean room otherwise). The examples below were computed with the replica as the separate program it was then; the same files come out of it in the same process (its records, made again in the same process on 2026-10-29, agree case for case).
The C library’s last digits (since 2026-11-04). With -wsinc5 and -wsinc9, 3dTshift weights its neighbours by a windowed sinc whose sinf and cosf AFNI takes from glibc, the C library of Linux. glibc’s results are now and then one unit in the last place away from the exact value rounded once. LARMORX computes them correctly rounded, the same on every platform. Since 2026-11-04 the clean room’s reproduce computes them exactly as glibc 2.35 does, with LARMORX’s versions of glibc’s functions (larmorx_core::math), and both its fix and its reproduce name GLIBC-07 exactly where a weight differs (about 1 % of the weights; register). Two cases show it, methods/glibc-sinf-wsinc5 and methods/glibc-sinf-wsinc9: slice times where the default’s output differs from AFNI’s in 2 and 14 values. In reproduce they are AFNI’s bytes, and the replica’s record has them too. fMRIPrep’s calls interpolate by Fourier, which calls neither function: the examples below are unchanged, the clean room’s runs giving the same bytes as before.
The verdicts at a glance
3dTshift 26.3.05 (standard comparison, 317 cases of the record), by category and verdictSelect a segment to list its cases below.
3dTshift 26.3.05 (standard comparison, 317 cases of the record), by category and verdictSelect a segment to list its cases below.
Each record runs 317 cases against AFNI 26.3.05: the clean room’s two cases of the weighted sinc’s functions (above) joined its record on 2026-11-04, and the replica’s record has had them since the same day. Since 2026-10-29 both ports follow AFNI 26.3.05, AFNI’s newest release, and their records run against it, with AFNI 25.2.09 run beside it on every case (AFNI’s own step): the replica since the version update, the clean room since its alignment the same day. Between the two releases this program changed in exactly two places, both corrections LARMORX already made by default: header slice code 2 read as NIfTI defines it (AFNI-03), and -no_detrend de-meaning every voxel (AFNI-05). In reproduce both ports now give 26.3.05’s result there and name neither. The examples below show both versions’ outputs: on fMRIPrep’s calls they are the same bytes.
The replica gives AFNI’s bytes in every case that produces an output, and AFNI’s exit status and messages in the others. The clean room is bit-identical wherever it does not interpolate by Fourier, and within the record’s thresholds where it does. AFNI computes the Fourier shift in float32 with its own FFT, the clean room in double precision, so float outputs differ in the last bits and integer outputs now and then round the other way, by one. Those differences are marked open: explained, small, and still closable.
In fMRIPrep: the slice-timing correction of a real BOLD run
Worked example
fMRIPrep's slice-timing correction of a real BOLD run
What this shows: On fMRIPrep’s call the replica gives AFNI’s values, every one, in both releases, on 1 and 12 threads, and fMRIPrep’s own output. The clean room differs from AFNI in 189 stored values, each by one unit of the scale factor, within the record’s thresholds: AFNI shifts in float32 with its own FFT, the clean room in double precision. No correction by default changes this call.
- Replica against AFNI 3dTshift 26.3.05Bit-identical
- Clean room against AFNI 3dTshift 26.3.05Open difference
The 3dTshift node fMRIPrep 25.2.6 ran on OpenNeuro ds005040 sub-002 (task clip, run 1): its arguments and the slice times it wrote, given to AFNI 25.2.09, to AFNI 26.3.05 (both ports’ reference since 2026-10-29) and to both ports, in fix and in reproduce and at 1 and 12 threads. fMRIPrep’s own output is the column it produced in its run. The clean room is compared with both releases; its record’s reference is AFNI 26.3.05.
- Data
- OpenNeuro ds005040, task clip run 1, sub-002 (CC0-1.0): 64 × 64 × 40 × 63 int16 values, 63 volumes; shown inside fMRIPrep’s BOLD brain mask, dilated by one voxel
- Node
- fMRIPrep 25.2.6,
bold_stc_wf/slice_timing_correction - Command
3dTshift -ignore 0 -prefix sub-002_task-clip_run-1_bold_tshift.nii.gz -tpattern @slice_timing.1D -TR 2s -tzero 0.975 …/sub-002_task-clip_run-1_bold.nii.gz- Slice times
- 40 slices, ascending, 0 to 1.95 s into each TR of 2 s, shifted to 0.975 s
- Programs
- AFNI 25.2.09 and AFNI 26.3.05 (the repository’s builds); larmorx-gpl 0.0.1 (the replica); the clean room at commit
a58978f4dfd1 - AFNI versions
- AFNI 26.3.05 (both ports’ reference since 2026-10-29) on the same arguments as AFNI 25.2.09: the same bytes in every output of fMRIPrep’s call. What changed between the two releases in these programs (header slice code 2, AFNI-03;
-no_detrend, AFNI-05; both corrected by LARMORX before AFNI fixed them) does not meet this call.
Data shown
- Political Moralization (OpenNeuro ds005040, version 1.2.0, doi:10.18112/openneuro.ds005040.v1.2.0), CC0 1.0 public-domain dedication.




Bit-identical10,321,920 of 10,321,920 voxels equal
Bit-identical10,321,920 of 10,321,920 voxels equal

Axial slice 11 of 40, volume 15 of 63, in the window of the brain's 0.5–99.5 %. The interactive viewer needs JavaScript; the metrics below are complete without it.
Who gives which bytes on this run
- fMRIPrep 25.2.6, as it ranAFNI 25.2.09 in its image
- AFNI 3dTshift 25.2.09the repository's build
- AFNI 3dTshift 26.3.05the repository's build
- replica1 and 12 threads, both modes
- Fourier shift in double precisionmax |Δ| 47.7
- clean room1 and 12 threads, both modes
Each box holds runs that give the same values. The clean room differs from AFNI in 189 of 10,321,920 values, each by one stored unit.
Every comparison, computed in float64 over every voxel of the outputs
| Comparison (A − B), verdict and reason | max |Δ| | Values that differ | RMS of Δ | max |Δ| ÷ range | 1 − NCC |
|---|---|---|---|---|---|
| The original against itself: the yardstick | |||||
| AFNI 3dTshift 26.3.05 − 25.2.09referenceAFNI 26.3.05 gives AFNI 25.2.09’s bytes on this call: the version step changes nothing here (its two changes, AFNI-03 and AFNI-05, need header slice code 2 or -no_detrend). | identical: 0 of 10,321,920 values differ | ||||
| fMRIPrep's output − AFNI 3dTshift 25.2.09referenceTwo builds of AFNI 25.2.09 (fMRIPrep’s image and the repository’s) give the same values: AFNI’s own variability on this run is zero. | identical: 0 of 10,321,920 values differ | ||||
| The replica against the original and fMRIPrep's output | |||||
| replica − AFNI 3dTshift 25.2.09Bit-identicalThe same values, every one. | identical: 0 of 10,321,920 values differ | ||||
| replica − AFNI 3dTshift 26.3.05Bit-identicalThe same values, every one. | identical: 0 of 10,321,920 values differ | ||||
| replica − fMRIPrep's outputBit-identicalThe same values, every one. | identical: 0 of 10,321,920 values differ | ||||
| The replica against itself: thread counts, fix and reproduce | |||||
| replica, 12 threads − 1 threadBit-identicalThe same bytes on any number of threads. | identical: 0 of 10,321,920 values differ | ||||
replica, fix − reproduceBit-identicalNo correction of the register applies to this run: fix and reproduce give the same bytes. | identical: 0 of 10,321,920 values differ | ||||
| The clean room against the original and fMRIPrep's output | |||||
| clean room − AFNI 3dTshift 25.2.09Open difference189 stored values differ by one unit (the scale factor), within the record’s thresholds. AFNI computes the Fourier shift in float32 with its own FFT, the clean room in double precision: float outputs differ in their last bits, integer outputs now and then round the other way, by one unit. AFNI’s own builds agree exactly (reference row), so this is not within AFNI’s variability; the replica shows it can be closed. | 47.7 (1 stored unit) | 189 of 10,321,920 (0.00183 %) | 0.204 | 0.000244 | 2.56e−11 |
| clean room − AFNI 3dTshift 26.3.05Open difference189 stored values differ by one unit (the scale factor), within the record’s thresholds. AFNI computes the Fourier shift in float32 with its own FFT, the clean room in double precision: float outputs differ in their last bits, integer outputs now and then round the other way, by one unit. AFNI’s own builds agree exactly (reference row), so this is not within AFNI’s variability; the replica shows it can be closed. | 47.7 (1 stored unit) | 189 of 10,321,920 (0.00183 %) | 0.204 | 0.000244 | 2.56e−11 |
| clean room − fMRIPrep's outputOpen differenceThe same values as against AFNI above: fMRIPrep’s AFNI gives the repository AFNI’s bytes. | 47.7 (1 stored unit) | 189 of 10,321,920 (0.00183 %) | 0.204 | 0.000244 | 2.56e−11 |
| The clean room against itself: thread counts, fix and reproduce | |||||
| clean room, 12 threads − 1 threadBit-identicalThe same bytes on any number of threads. | identical: 0 of 10,321,920 values differ | ||||
clean room, fix − reproduceBit-identicalNo correction of the register applies to this run: fix and reproduce give the same bytes. | identical: 0 of 10,321,920 values differ | ||||
Δ is A − B, in the image’s units (stored value × scale factor); the stored units are given in brackets. Computed in float64 over all 10,321,920 values of the 64 × 64 × 40 × 63 series, not only the brain shown. The records’ thresholds: integer outputs within one stored unit, with the share that differs reported; bit-identity reported.
Provenance of this example
- Data: OpenNeuro ds005040, task clip run 1, sub-002, CC0-1.0; fMRIPrep 25.2.6’s run
ds005040-sub-002-noreconallfor its own output and the brain mask - Inputs: BOLD (sha256 590cda2ebbff3701…); fMRIPrep’s output (sha256 ab54f976e126f608…); BOLD with a negative scale factor (made from BOLD) (sha256 d54b58e7c8b2d4c8…)
- Runs: figures cache entry
afni-tshift/fmriprep-ds005040-clip-1, computed 2026-10-21T09:26:38+00:00 with larmorxa58978f4dfd1, AFNI 25.2.09, larmorx-gpl 0.0.1; every command, its environment, threads and exit status are in itsRUN_INFO.json
Every number above is in afni-tshift.json, exported by python -m larmorx_validation evidence afni-tshift.
A deliberate correction: a negative scale factor (AFNI-01)
The same run stored with a negative scale factor is the same data: every value is unchanged. AFNI applies that factor on output only, so its result comes out sign-flipped and scaled (AFNI-01). Both ports correct it by default, fix, and warn; reproduce gives AFNI’s result.
Worked example
AFNI-01: the same run, stored with a negative scale factor
What this shows: Stored with a negative scale factor, the same values come out of AFNI sign-flipped and scaled, in both releases (AFNI-01). In fix, their default, both ports correct it with a warning: the replica gives AFNI’s result on the usual encoding, the clean room its own. In reproduce the replica gives AFNI’s result, defect included, and the clean room does too, but for 2 values off by one stored unit.
- Replica against AFNI 3dTshift 25.2.09Deliberate correction
- Clean room against AFNI 3dTshift 25.2.09Deliberate correction
NIfTI lets integer data carry a negative scale factor: the run below holds the same values as above, its stored integers negated and its scale factor −47.67. fMRIPrep’s command, given to AFNI 25.2.09, to AFNI 26.3.05 and to both ports in fix and in reproduce.
- Input
- the run above, re-stored by
larmorx_validation.evidence.afni_tshift.negative_slope: onlyscl_slopeand the data bytes change - Defect
- AFNI-01: A negative scl_slope flips the data; corrected by default in both ports, with a warning
- Command
- fMRIPrep’s, as in the example above
- AFNI versions
- AFNI 26.3.05 (both ports’ reference since 2026-10-29) on the same arguments as AFNI 25.2.09: the same bytes in every output of the call on either encoding. What changed between the two releases in these programs (header slice code 2, AFNI-03;
-no_detrend, AFNI-05; both corrected by LARMORX before AFNI fixed them) does not meet this call.
Data shown
- Political Moralization (OpenNeuro ds005040, version 1.2.0, doi:10.18112/openneuro.ds005040.v1.2.0), CC0 1.0 public-domain dedication.




Bit-identical10,321,920 of 10,321,920 voxels equal

Bit-identical10,321,920 of 10,321,920 voxels equal
Axial slice 11 of 40, volume 15 of 63, in the window of the brain's 0.5–99.5 %. The interactive viewer needs JavaScript; the metrics below are complete without it.
Every comparison, computed in float64 over every voxel of the outputs
| Comparison (A − B), verdict and reason | max |Δ| | Values that differ | RMS of Δ | max |Δ| ÷ range | 1 − NCC |
|---|---|---|---|---|---|
| The input against itself: two encodings | |||||
| the two inputs' valuesreferenceThe two encodings hold the same values, every one. AFNI-01 | identical: 0 of 10,321,920 values differ | ||||
| The original against itself: the defect | |||||
| AFNI 3dTshift 25.2.09 on the negative scale factor − on the usual encodingreferenceAFNI’s result changes with the encoding of the same data: AFNI applies the negative scale factor on output only, so the shifted slices come out sign-flipped and scaled (AFNI-01). AFNI-01 | 1.99e5 | 9,161,285 of 10,321,920 (88.8 %) | 3.54e4 | 1.02 | 2 |
| The original against itself: the yardstick | |||||
| AFNI 3dTshift 26.3.05 − 25.2.09, on the negative scale factorreferenceAFNI 26.3.05 gives AFNI 25.2.09’s bytes on this call: the version step changes nothing here (its two changes, AFNI-03 and AFNI-05, need header slice code 2 or -no_detrend). AFNI-01 is in both releases. AFNI-01 | identical: 0 of 10,321,920 values differ | ||||
| The replica against the original | |||||
| replica (fix) − AFNI 3dTshift 25.2.09 on the usual encodingBit-identicalThe corrected result is AFNI’s own result on the same values stored the usual way. AFNI-01 | identical: 0 of 10,321,920 values differ | ||||
replica (fix) − AFNI 3dTshift 25.2.09, same inputDeliberate correctionAFNI-01, corrected by default with a warning: the replica applies the scale factor to the shifted slices, and gives the values the data call for, those of the usual encoding (the rows on the usual encoding); reproduce gives AFNI’s. AFNI-01 | 1.99e5 (4.18e3 stored units) | 9,161,285 of 10,321,920 (88.8 %) | 3.54e4 | 48.6 | 2 |
replica (reproduce) − AFNI 3dTshift 25.2.09, same inputBit-identicalIn reproduce, the replica gives AFNI’s result, defect included. AFNI-01 | identical: 0 of 10,321,920 values differ | ||||
replica (reproduce) − AFNI 3dTshift 26.3.05, same inputBit-identicalIn reproduce, the replica gives AFNI 26.3.05’s result, defect included (AFNI-01 is unchanged in 26.3.05). AFNI-01 | identical: 0 of 10,321,920 values differ | ||||
| The clean room against the original | |||||
clean room (fix) − AFNI 3dTshift 25.2.09, same inputDeliberate correctionAFNI-01, corrected by default with a warning: the clean room applies the scale factor to the shifted slices, and gives the values the data call for, those of the usual encoding (the rows on the usual encoding); reproduce gives AFNI’s. AFNI-01 | 1.99e5 (4.18e3 stored units) | 9,161,285 of 10,321,920 (88.8 %) | 3.54e4 | 48.6 | 2 |
clean room (reproduce) − AFNI 3dTshift 25.2.09, same inputOpen differenceIn reproduce, the clean room gives AFNI’s result, defect included, but for 2 values off by one stored unit: AFNI computes the Fourier shift in float32 with its own FFT, the clean room in double precision: float outputs differ in their last bits, integer outputs now and then round the other way, by one unit. AFNI-01 | 47.7 (1 stored unit) | 2 of 10,321,920 (1.94e−5 %) | 0.021 | 0.0116 | 6.13e−10 |
clean room (reproduce) − AFNI 3dTshift 26.3.05, same inputOpen differenceIn reproduce, the clean room gives AFNI 26.3.05’s result, defect included, but for 2 values off by one stored unit: AFNI computes the Fourier shift in float32 with its own FFT, the clean room in double precision: float outputs differ in their last bits, integer outputs now and then round the other way, by one unit. AFNI-01 | 47.7 (1 stored unit) | 2 of 10,321,920 (1.94e−5 %) | 0.021 | 0.0116 | 6.13e−10 |
| The clean room against itself: two encodings | |||||
| clean room (fix) − itself on the usual encodingBit-identicalThe corrected result is the clean room’s own result on the same values stored the usual way. AFNI-01 | identical: 0 of 10,321,920 values differ | ||||
Δ is A − B, in the image’s units (stored value × scale factor); the stored units are given in brackets. Computed in float64 over all 10,321,920 values of the 64 × 64 × 40 × 63 series, not only the brain shown. The records’ thresholds: integer outputs within one stored unit, with the share that differs reported; bit-identity reported.
Provenance of this example
- Data: OpenNeuro ds005040, task clip run 1, sub-002, CC0-1.0; fMRIPrep 25.2.6’s run
ds005040-sub-002-noreconallfor its own output and the brain mask - Inputs: BOLD (sha256 590cda2ebbff3701…); fMRIPrep’s output (sha256 ab54f976e126f608…); BOLD with a negative scale factor (made from BOLD) (sha256 d54b58e7c8b2d4c8…)
- Runs: figures cache entry
afni-tshift/fmriprep-ds005040-clip-1, computed 2026-10-21T09:26:38+00:00 with larmorxa58978f4dfd1, AFNI 25.2.09, larmorx-gpl 0.0.1; every command, its environment, threads and exit status are in itsRUN_INFO.json
Every number above is in afni-tshift.json, exported by python -m larmorx_validation evidence afni-tshift.
Every case
Each case of the two records, with what it tests, its command line, each port’s verdict and the reason. Search, filter by category or verdict (or select a segment of a chart above), sort by a column; #case=<name> links to one case.
318 cases
| Case | Category | What it tests | replica | clean room | Checks |
|---|---|---|---|---|---|
synthetic/content/clipping | synthetic series | default Fourier, -tpattern alt+z: Series swinging between -32760 and 32760: shifted values clip to ±32767 (AFNI never writes -32768).command line3dTshift -tpattern alt+z -prefix out.nii synthetic/tshift/content/clipping.nii.gz | Bit-identical | Open difference 8 values differ from AFNI’s, within the record’s thresholds: AFNI’s Fourier shift is float32, the clean room’s double precision. | 15/15 |
synthetic/content/constant | synthetic series | default Fourier, -tpattern alt+z: Constant series (every voxel 500): detrending leaves zeros, the range is a point.command line3dTshift -tpattern alt+z -prefix out.nii synthetic/tshift/content/constant.nii.gz | Bit-identical | Bit-identical | 15/15 |
synthetic/content/half-integers | synthetic series | default Fourier, -tpattern alt+z: float32 series made of k + 0.5 values (exact rounding ties when written as int16 by other tools).command line3dTshift -tpattern alt+z -prefix out.nii synthetic/tshift/content/half-integers.nii.gz | Bit-identical | Open difference 2,713 values differ from AFNI’s, within the record’s thresholds: AFNI’s Fourier shift is float32, the clean room’s double precision. | 15/15 |
synthetic/content/steps | synthetic series | default Fourier, -tpattern alt+z: Step functions: the Fourier shift rings (Gibbs), so the clipping to the input range matters.command line3dTshift -tpattern alt+z -prefix out.nii synthetic/tshift/content/steps.nii.gz | Bit-identical | Open difference 1,218 values differ from AFNI’s, within the record’s thresholds: AFNI’s Fourier shift is float32, the clean room’s double precision. | 15/15 |
synthetic/dtypes/float32-nonfinite | synthetic series | default Fourier, -tpattern alt+z: float32 with NaN, +inf and -inf samples: AFNI reads them as 0.command line3dTshift -tpattern alt+z -prefix out.nii synthetic/tshift/dtypes/float32-nonfinite.nii.gz | Bit-identical | Open difference 230 values differ from AFNI’s, within the record’s thresholds: AFNI’s Fourier shift is float32, the clean room’s double precision. | 15/15 |
synthetic/dtypes/float32-slope | synthetic series | default Fourier, -tpattern alt+z: float32 with scl_slope 2 and no intercept: AFNI keeps it as a brick factor even for float data.command line3dTshift -tpattern alt+z -prefix out.nii synthetic/tshift/dtypes/float32-slope.nii.gz | Bit-identical | Open difference 167 values differ from AFNI’s, within the record’s thresholds: AFNI’s Fourier shift is float32, the clean room’s double precision. | 14/14 |
synthetic/dtypes/float32 | synthetic series | default Fourier, -tpattern alt+z: float32: shifted values are stored as computed.command line3dTshift -tpattern alt+z -prefix out.nii synthetic/tshift/dtypes/float32.nii.gz | Bit-identical | Open difference 168 values differ from AFNI’s, within the record’s thresholds: AFNI’s Fourier shift is float32, the clean room’s double precision. | 15/15 |
synthetic/dtypes/float64 | synthetic series | default Fourier, -tpattern alt+z: float64: AFNI converts to float32 on read and writes float32.command line3dTshift -tpattern alt+z -prefix out.nii synthetic/tshift/dtypes/float64.nii.gz | Bit-identical | Open difference 168 values differ from AFNI’s, within the record’s thresholds: AFNI’s Fourier shift is float32, the clean room’s double precision. | 14/14 |
synthetic/dtypes/int16-negative-slope | synthetic series | default Fourier, -tpattern alt+z: int16 with scl_slope -0.5: AFNI applies a negative brick factor on output but not on input.command line3dTshift -tpattern alt+z -prefix out.nii synthetic/tshift/dtypes/int16-negative-slope.nii.gz | Bit-identical | Bit-identical | 15/15 · 14/14 |
synthetic/dtypes/int16-slope-inter | synthetic series | default Fourier, -tpattern alt+z: int16 with scl_slope 0.37 and scl_inter 12.5: AFNI converts to float32.command line3dTshift -tpattern alt+z -prefix out.nii synthetic/tshift/dtypes/int16-slope-inter.nii.gz | Bit-identical | Open difference 162 values differ from AFNI’s, within the record’s thresholds: AFNI’s Fourier shift is float32, the clean room’s double precision. | 14/14 |
synthetic/dtypes/int16-slope | synthetic series | default Fourier, -tpattern alt+z: int16 with scl_slope 0.25 and no intercept: a brick factor (output stays int16).command line3dTshift -tpattern alt+z -prefix out.nii synthetic/tshift/dtypes/int16-slope.nii.gz | Bit-identical | Bit-identical | 14/14 |
synthetic/dtypes/int16 | synthetic series | default Fourier, -tpattern alt+z: int16, no scaling: AFNI keeps short and rounds the output with SHORTIZE.command line3dTshift -tpattern alt+z -prefix out.nii synthetic/tshift/dtypes/int16.nii.gz | Bit-identical | Bit-identical | 15/15 |
synthetic/dtypes/int32 | synthetic series | default Fourier, -tpattern alt+z: int32: AFNI converts to float32 on read and writes float32.command line3dTshift -tpattern alt+z -prefix out.nii synthetic/tshift/dtypes/int32.nii.gz | Bit-identical | Open difference 167 values differ from AFNI’s, within the record’s thresholds: AFNI’s Fourier shift is float32, the clean room’s double precision. | 14/14 |
synthetic/dtypes/uint8 | synthetic series | default Fourier, -tpattern alt+z: uint8: AFNI keeps byte and rounds the output with BYTEIZE.command line3dTshift -tpattern alt+z -prefix out.nii synthetic/tshift/dtypes/uint8.nii.gz | Bit-identical | Bit-identical | 15/15 |
synthetic/lengths/nt0012-fft16 | synthetic series | default Fourier, -tpattern alt+z: int16 series of 12 time points: AFNI's FFT length is 16 (fft16).command line3dTshift -tpattern alt+z -prefix out.nii synthetic/tshift/lengths/nt0012-fft16.nii.gz | Bit-identical | Bit-identical | 15/15 |
synthetic/lengths/nt0016-fft20 | synthetic series | default Fourier, -tpattern alt+z: int16 series of 16 time points: AFNI's FFT length is 20 (radix-5).command line3dTshift -tpattern alt+z -prefix out.nii synthetic/tshift/lengths/nt0016-fft20.nii.gz | Bit-identical | Bit-identical | 15/15 |
synthetic/lengths/nt0020-fft24 | synthetic series | default Fourier, -tpattern alt+z: int16 series of 20 time points: AFNI's FFT length is 24 (radix-3).command line3dTshift -tpattern alt+z -prefix out.nii synthetic/tshift/lengths/nt0020-fft24.nii.gz | Bit-identical | Bit-identical | 15/15 |
synthetic/lengths/nt0028-fft32 | synthetic series | default Fourier, -tpattern alt+z: int16 series of 28 time points: AFNI's FFT length is 32 (fft32).command line3dTshift -tpattern alt+z -prefix out.nii synthetic/tshift/lengths/nt0028-fft32.nii.gz | Bit-identical | Bit-identical | 15/15 |
synthetic/lengths/nt0056-fft60 | synthetic series | default Fourier, -tpattern alt+z: int16 series of 56 time points: AFNI's FFT length is 60 (radix-15).command line3dTshift -tpattern alt+z -prefix out.nii synthetic/tshift/lengths/nt0056-fft60.nii.gz | Bit-identical | Bit-identical | 15/15 |
synthetic/lengths/nt0060-fft64 | synthetic series | default Fourier, -tpattern alt+z: int16 series of 60 time points: AFNI's FFT length is 64 (fft64).command line3dTshift -tpattern alt+z -prefix out.nii synthetic/tshift/lengths/nt0060-fft64.nii.gz | Bit-identical | Bit-identical | 15/15 |
synthetic/lengths/nt0116-fft120 | synthetic series | default Fourier, -tpattern alt+z: int16 series of 116 time points: AFNI's FFT length is 120 (radix-15).command line3dTshift -tpattern alt+z -prefix out.nii synthetic/tshift/lengths/nt0116-fft120.nii.gz | Bit-identical | Bit-identical | 15/15 |
synthetic/lengths/nt0124-fft128 | synthetic series | default Fourier, -tpattern alt+z: int16 series of 124 time points: AFNI's FFT length is 128 (fft128).command line3dTshift -tpattern alt+z -prefix out.nii synthetic/tshift/lengths/nt0124-fft128.nii.gz | Bit-identical | Bit-identical | 15/15 |
synthetic/lengths/nt0156-fft160 | synthetic series | default Fourier, -tpattern alt+z: int16 series of 156 time points: AFNI's FFT length is 160 (radix-5).command line3dTshift -tpattern alt+z -prefix out.nii synthetic/tshift/lengths/nt0156-fft160.nii.gz | Bit-identical | Bit-identical | 15/15 |
synthetic/lengths/nt0188-fft192 | synthetic series | default Fourier, -tpattern alt+z: int16 series of 188 time points: AFNI's FFT length is 192 (radix-3).command line3dTshift -tpattern alt+z -prefix out.nii synthetic/tshift/lengths/nt0188-fft192.nii.gz | Bit-identical | Bit-identical | 15/15 |
synthetic/lengths/nt0236-fft240 | synthetic series | default Fourier, -tpattern alt+z: int16 series of 236 time points: AFNI's FFT length is 240 (radix-15).command line3dTshift -tpattern alt+z -prefix out.nii synthetic/tshift/lengths/nt0236-fft240.nii.gz | Bit-identical | Bit-identical | 15/15 |
synthetic/lengths/nt0252-fft256 | synthetic series | default Fourier, -tpattern alt+z: int16 series of 252 time points: AFNI's FFT length is 256 (fft256).command line3dTshift -tpattern alt+z -prefix out.nii synthetic/tshift/lengths/nt0252-fft256.nii.gz | Bit-identical | Bit-identical | 15/15 |
synthetic/lengths/nt0476-fft480 | synthetic series | default Fourier, -tpattern alt+z: int16 series of 476 time points: AFNI's FFT length is 480 (radix-15).command line3dTshift -tpattern alt+z -prefix out.nii synthetic/tshift/lengths/nt0476-fft480.nii.gz | Bit-identical | Open difference 1 values differ from AFNI’s, within the record’s thresholds: AFNI’s Fourier shift is float32, the clean room’s double precision. | 15/15 |
synthetic/lengths/nt0508-fft512 | synthetic series | default Fourier, -tpattern alt+z: int16 series of 508 time points: AFNI's FFT length is 512 (fft512).command line3dTshift -tpattern alt+z -prefix out.nii synthetic/tshift/lengths/nt0508-fft512.nii.gz | Bit-identical | Bit-identical | 15/15 |
synthetic/lengths/nt0764-fft768 | synthetic series | default Fourier, -tpattern alt+z: int16 series of 764 time points: AFNI's FFT length is 768 (radix-3).command line3dTshift -tpattern alt+z -prefix out.nii synthetic/tshift/lengths/nt0764-fft768.nii.gz | Bit-identical | Bit-identical | 15/15 |
synthetic/lengths/nt1020-fft1024 | synthetic series | default Fourier, -tpattern alt+z: int16 series of 1020 time points: AFNI's FFT length is 1024 (fft1024).command line3dTshift -tpattern alt+z -prefix out.nii synthetic/tshift/lengths/nt1020-fft1024.nii.gz | Bit-identical | Open difference 2 values differ from AFNI’s, within the record’s thresholds: AFNI’s Fourier shift is float32, the clean room’s double precision. | 15/15 |
synthetic/lengths/nt1276-fft1280 | synthetic series | default Fourier, -tpattern alt+z: int16 series of 1276 time points: AFNI's FFT length is 1280 (radix-5).command line3dTshift -tpattern alt+z -prefix out.nii synthetic/tshift/lengths/nt1276-fft1280.nii.gz | Bit-identical | Bit-identical | 15/15 |
synthetic/lengths/nt2044-fft2048 | synthetic series | default Fourier, -tpattern alt+z: int16 series of 2044 time points: AFNI's FFT length is 2048 (fft2048).command line3dTshift -tpattern alt+z -prefix out.nii synthetic/tshift/lengths/nt2044-fft2048.nii.gz | Bit-identical | Open difference 1 values differ from AFNI’s, within the record’s thresholds: AFNI’s Fourier shift is float32, the clean room’s double precision. | 15/15 |
synthetic/lengths/nt4092-fft4096 | synthetic series | default Fourier, -tpattern alt+z: int16 series of 4092 time points: AFNI's FFT length is 4096 (fft_4dec).command line3dTshift -tpattern alt+z -prefix out.nii synthetic/tshift/lengths/nt4092-fft4096.nii.gz | Bit-identical | Open difference 2 values differ from AFNI’s, within the record’s thresholds: AFNI’s Fourier shift is float32, the clean room’s double precision. | 15/15 |
methods/content/clipping-linear | interpolation methods | -linear, -tpattern alt-z, on content/clippingcommand line3dTshift -tpattern alt-z -linear -prefix out.nii synthetic/tshift/content/clipping.nii.gz | Bit-identical | Bit-identical | 15/15 |
methods/content/clipping-cubic | interpolation methods | -cubic, -tpattern alt-z, on content/clippingcommand line3dTshift -tpattern alt-z -cubic -prefix out.nii synthetic/tshift/content/clipping.nii.gz | Bit-identical | Bit-identical | 15/15 |
methods/content/clipping-quintic | interpolation methods | -quintic, -tpattern alt-z, on content/clippingcommand line3dTshift -tpattern alt-z -quintic -prefix out.nii synthetic/tshift/content/clipping.nii.gz | Bit-identical | Bit-identical | 15/15 |
methods/content/clipping-heptic | interpolation methods | -heptic, -tpattern alt-z, on content/clippingcommand line3dTshift -tpattern alt-z -heptic -prefix out.nii synthetic/tshift/content/clipping.nii.gz | Bit-identical | Bit-identical | 15/15 |
methods/content/clipping-wsinc5 | interpolation methods | -wsinc5, -tpattern alt-z, on content/clippingcommand line3dTshift -tpattern alt-z -wsinc5 -prefix out.nii synthetic/tshift/content/clipping.nii.gz | Bit-identical | Bit-identical | 15/15 |
methods/content/clipping-wsinc9 | interpolation methods | -wsinc9, -tpattern alt-z, on content/clippingcommand line3dTshift -tpattern alt-z -wsinc9 -prefix out.nii synthetic/tshift/content/clipping.nii.gz | Bit-identical | Bit-identical | 15/15 |
methods/content/constant-linear | interpolation methods | -linear, -tpattern alt-z, on content/constantcommand line3dTshift -tpattern alt-z -linear -prefix out.nii synthetic/tshift/content/constant.nii.gz | Bit-identical | Bit-identical | 15/15 |
methods/content/constant-cubic | interpolation methods | -cubic, -tpattern alt-z, on content/constantcommand line3dTshift -tpattern alt-z -cubic -prefix out.nii synthetic/tshift/content/constant.nii.gz | Bit-identical | Bit-identical | 15/15 |
methods/content/constant-quintic | interpolation methods | -quintic, -tpattern alt-z, on content/constantcommand line3dTshift -tpattern alt-z -quintic -prefix out.nii synthetic/tshift/content/constant.nii.gz | Bit-identical | Bit-identical | 15/15 |
methods/content/constant-heptic | interpolation methods | -heptic, -tpattern alt-z, on content/constantcommand line3dTshift -tpattern alt-z -heptic -prefix out.nii synthetic/tshift/content/constant.nii.gz | Bit-identical | Bit-identical | 15/15 |
methods/content/constant-wsinc5 | interpolation methods | -wsinc5, -tpattern alt-z, on content/constantcommand line3dTshift -tpattern alt-z -wsinc5 -prefix out.nii synthetic/tshift/content/constant.nii.gz | Bit-identical | Bit-identical | 15/15 |
methods/content/constant-wsinc9 | interpolation methods | -wsinc9, -tpattern alt-z, on content/constantcommand line3dTshift -tpattern alt-z -wsinc9 -prefix out.nii synthetic/tshift/content/constant.nii.gz | Bit-identical | Bit-identical | 15/15 |
methods/content/half-integers-linear | interpolation methods | -linear, -tpattern alt-z, on content/half-integerscommand line3dTshift -tpattern alt-z -linear -prefix out.nii synthetic/tshift/content/half-integers.nii.gz | Bit-identical | Bit-identical | 15/15 |
methods/content/half-integers-cubic | interpolation methods | -cubic, -tpattern alt-z, on content/half-integerscommand line3dTshift -tpattern alt-z -cubic -prefix out.nii synthetic/tshift/content/half-integers.nii.gz | Bit-identical | Bit-identical | 15/15 |
methods/content/half-integers-quintic | interpolation methods | -quintic, -tpattern alt-z, on content/half-integerscommand line3dTshift -tpattern alt-z -quintic -prefix out.nii synthetic/tshift/content/half-integers.nii.gz | Bit-identical | Bit-identical | 15/15 |
methods/content/half-integers-heptic | interpolation methods | -heptic, -tpattern alt-z, on content/half-integerscommand line3dTshift -tpattern alt-z -heptic -prefix out.nii synthetic/tshift/content/half-integers.nii.gz | Bit-identical | Bit-identical | 15/15 |
methods/content/half-integers-wsinc5 | interpolation methods | -wsinc5, -tpattern alt-z, on content/half-integerscommand line3dTshift -tpattern alt-z -wsinc5 -prefix out.nii synthetic/tshift/content/half-integers.nii.gz | Bit-identical | Bit-identical | 15/15 |
methods/content/half-integers-wsinc9 | interpolation methods | -wsinc9, -tpattern alt-z, on content/half-integerscommand line3dTshift -tpattern alt-z -wsinc9 -prefix out.nii synthetic/tshift/content/half-integers.nii.gz | Bit-identical | Bit-identical | 15/15 |
methods/content/steps-linear | interpolation methods | -linear, -tpattern alt-z, on content/stepscommand line3dTshift -tpattern alt-z -linear -prefix out.nii synthetic/tshift/content/steps.nii.gz | Bit-identical | Bit-identical | 15/15 |
methods/content/steps-cubic | interpolation methods | -cubic, -tpattern alt-z, on content/stepscommand line3dTshift -tpattern alt-z -cubic -prefix out.nii synthetic/tshift/content/steps.nii.gz | Bit-identical | Bit-identical | 15/15 |
methods/content/steps-quintic | interpolation methods | -quintic, -tpattern alt-z, on content/stepscommand line3dTshift -tpattern alt-z -quintic -prefix out.nii synthetic/tshift/content/steps.nii.gz | Bit-identical | Bit-identical | 15/15 |
methods/content/steps-heptic | interpolation methods | -heptic, -tpattern alt-z, on content/stepscommand line3dTshift -tpattern alt-z -heptic -prefix out.nii synthetic/tshift/content/steps.nii.gz | Bit-identical | Bit-identical | 15/15 |
methods/content/steps-wsinc5 | interpolation methods | -wsinc5, -tpattern alt-z, on content/stepscommand line3dTshift -tpattern alt-z -wsinc5 -prefix out.nii synthetic/tshift/content/steps.nii.gz | Bit-identical | Bit-identical | 15/15 |
methods/content/steps-wsinc9 | interpolation methods | -wsinc9, -tpattern alt-z, on content/stepscommand line3dTshift -tpattern alt-z -wsinc9 -prefix out.nii synthetic/tshift/content/steps.nii.gz | Bit-identical | Bit-identical | 15/15 |
methods/dtypes/float32-nonfinite-linear | interpolation methods | -linear, -tpattern alt-z, on dtypes/float32-nonfinitecommand line3dTshift -tpattern alt-z -linear -prefix out.nii synthetic/tshift/dtypes/float32-nonfinite.nii.gz | Bit-identical | Bit-identical | 15/15 |
methods/dtypes/float32-nonfinite-cubic | interpolation methods | -cubic, -tpattern alt-z, on dtypes/float32-nonfinitecommand line3dTshift -tpattern alt-z -cubic -prefix out.nii synthetic/tshift/dtypes/float32-nonfinite.nii.gz | Bit-identical | Bit-identical | 15/15 |
methods/dtypes/float32-nonfinite-quintic | interpolation methods | -quintic, -tpattern alt-z, on dtypes/float32-nonfinitecommand line3dTshift -tpattern alt-z -quintic -prefix out.nii synthetic/tshift/dtypes/float32-nonfinite.nii.gz | Bit-identical | Bit-identical | 15/15 |
methods/dtypes/float32-nonfinite-heptic | interpolation methods | -heptic, -tpattern alt-z, on dtypes/float32-nonfinitecommand line3dTshift -tpattern alt-z -heptic -prefix out.nii synthetic/tshift/dtypes/float32-nonfinite.nii.gz | Bit-identical | Bit-identical | 15/15 |
methods/dtypes/float32-nonfinite-wsinc5 | interpolation methods | -wsinc5, -tpattern alt-z, on dtypes/float32-nonfinitecommand line3dTshift -tpattern alt-z -wsinc5 -prefix out.nii synthetic/tshift/dtypes/float32-nonfinite.nii.gz | Bit-identical | Bit-identical | 15/15 |
methods/dtypes/float32-nonfinite-wsinc9 | interpolation methods | -wsinc9, -tpattern alt-z, on dtypes/float32-nonfinitecommand line3dTshift -tpattern alt-z -wsinc9 -prefix out.nii synthetic/tshift/dtypes/float32-nonfinite.nii.gz | Bit-identical | Bit-identical | 15/15 |
methods/dtypes/float32-slope-linear | interpolation methods | -linear, -tpattern alt-z, on dtypes/float32-slopecommand line3dTshift -tpattern alt-z -linear -prefix out.nii synthetic/tshift/dtypes/float32-slope.nii.gz | Bit-identical | Bit-identical | 14/14 |
methods/dtypes/float32-slope-cubic | interpolation methods | -cubic, -tpattern alt-z, on dtypes/float32-slopecommand line3dTshift -tpattern alt-z -cubic -prefix out.nii synthetic/tshift/dtypes/float32-slope.nii.gz | Bit-identical | Bit-identical | 14/14 |
methods/dtypes/float32-slope-quintic | interpolation methods | -quintic, -tpattern alt-z, on dtypes/float32-slopecommand line3dTshift -tpattern alt-z -quintic -prefix out.nii synthetic/tshift/dtypes/float32-slope.nii.gz | Bit-identical | Bit-identical | 14/14 |
methods/dtypes/float32-slope-heptic | interpolation methods | -heptic, -tpattern alt-z, on dtypes/float32-slopecommand line3dTshift -tpattern alt-z -heptic -prefix out.nii synthetic/tshift/dtypes/float32-slope.nii.gz | Bit-identical | Bit-identical | 14/14 |
methods/dtypes/float32-slope-wsinc5 | interpolation methods | -wsinc5, -tpattern alt-z, on dtypes/float32-slopecommand line3dTshift -tpattern alt-z -wsinc5 -prefix out.nii synthetic/tshift/dtypes/float32-slope.nii.gz | Bit-identical | Bit-identical | 14/14 |
methods/dtypes/float32-slope-wsinc9 | interpolation methods | -wsinc9, -tpattern alt-z, on dtypes/float32-slopecommand line3dTshift -tpattern alt-z -wsinc9 -prefix out.nii synthetic/tshift/dtypes/float32-slope.nii.gz | Bit-identical | Bit-identical | 14/14 |
methods/dtypes/float32-linear | interpolation methods | -linear, -tpattern alt-z, on dtypes/float32command line3dTshift -tpattern alt-z -linear -prefix out.nii synthetic/tshift/dtypes/float32.nii.gz | Bit-identical | Bit-identical | 15/15 |
methods/dtypes/float32-cubic | interpolation methods | -cubic, -tpattern alt-z, on dtypes/float32command line3dTshift -tpattern alt-z -cubic -prefix out.nii synthetic/tshift/dtypes/float32.nii.gz | Bit-identical | Bit-identical | 15/15 |
methods/dtypes/float32-quintic | interpolation methods | -quintic, -tpattern alt-z, on dtypes/float32command line3dTshift -tpattern alt-z -quintic -prefix out.nii synthetic/tshift/dtypes/float32.nii.gz | Bit-identical | Bit-identical | 15/15 |
methods/dtypes/float32-heptic | interpolation methods | -heptic, -tpattern alt-z, on dtypes/float32command line3dTshift -tpattern alt-z -heptic -prefix out.nii synthetic/tshift/dtypes/float32.nii.gz | Bit-identical | Bit-identical | 15/15 |
methods/dtypes/float32-wsinc5 | interpolation methods | -wsinc5, -tpattern alt-z, on dtypes/float32command line3dTshift -tpattern alt-z -wsinc5 -prefix out.nii synthetic/tshift/dtypes/float32.nii.gz | Bit-identical | Bit-identical | 15/15 |
methods/dtypes/float32-wsinc9 | interpolation methods | -wsinc9, -tpattern alt-z, on dtypes/float32command line3dTshift -tpattern alt-z -wsinc9 -prefix out.nii synthetic/tshift/dtypes/float32.nii.gz | Bit-identical | Bit-identical | 15/15 |
methods/dtypes/float64-linear | interpolation methods | -linear, -tpattern alt-z, on dtypes/float64command line3dTshift -tpattern alt-z -linear -prefix out.nii synthetic/tshift/dtypes/float64.nii.gz | Bit-identical | Bit-identical | 14/14 |
methods/dtypes/float64-cubic | interpolation methods | -cubic, -tpattern alt-z, on dtypes/float64command line3dTshift -tpattern alt-z -cubic -prefix out.nii synthetic/tshift/dtypes/float64.nii.gz | Bit-identical | Bit-identical | 14/14 |
methods/dtypes/float64-quintic | interpolation methods | -quintic, -tpattern alt-z, on dtypes/float64command line3dTshift -tpattern alt-z -quintic -prefix out.nii synthetic/tshift/dtypes/float64.nii.gz | Bit-identical | Bit-identical | 14/14 |
methods/dtypes/float64-heptic | interpolation methods | -heptic, -tpattern alt-z, on dtypes/float64command line3dTshift -tpattern alt-z -heptic -prefix out.nii synthetic/tshift/dtypes/float64.nii.gz | Bit-identical | Bit-identical | 14/14 |
methods/dtypes/float64-wsinc5 | interpolation methods | -wsinc5, -tpattern alt-z, on dtypes/float64command line3dTshift -tpattern alt-z -wsinc5 -prefix out.nii synthetic/tshift/dtypes/float64.nii.gz | Bit-identical | Bit-identical | 14/14 |
methods/dtypes/float64-wsinc9 | interpolation methods | -wsinc9, -tpattern alt-z, on dtypes/float64command line3dTshift -tpattern alt-z -wsinc9 -prefix out.nii synthetic/tshift/dtypes/float64.nii.gz | Bit-identical | Bit-identical | 14/14 |
methods/dtypes/int16-negative-slope-linear | interpolation methods | -linear, -tpattern alt-z, on dtypes/int16-negative-slopecommand line3dTshift -tpattern alt-z -linear -prefix out.nii synthetic/tshift/dtypes/int16-negative-slope.nii.gz | Bit-identical | Bit-identical | 15/15 · 14/14 |
methods/dtypes/int16-negative-slope-cubic | interpolation methods | -cubic, -tpattern alt-z, on dtypes/int16-negative-slopecommand line3dTshift -tpattern alt-z -cubic -prefix out.nii synthetic/tshift/dtypes/int16-negative-slope.nii.gz | Bit-identical | Bit-identical | 15/15 · 14/14 |
methods/dtypes/int16-negative-slope-quintic | interpolation methods | -quintic, -tpattern alt-z, on dtypes/int16-negative-slopecommand line3dTshift -tpattern alt-z -quintic -prefix out.nii synthetic/tshift/dtypes/int16-negative-slope.nii.gz | Bit-identical | Bit-identical | 15/15 · 14/14 |
methods/dtypes/int16-negative-slope-heptic | interpolation methods | -heptic, -tpattern alt-z, on dtypes/int16-negative-slopecommand line3dTshift -tpattern alt-z -heptic -prefix out.nii synthetic/tshift/dtypes/int16-negative-slope.nii.gz | Bit-identical | Bit-identical | 15/15 · 14/14 |
methods/dtypes/int16-negative-slope-wsinc5 | interpolation methods | -wsinc5, -tpattern alt-z, on dtypes/int16-negative-slopecommand line3dTshift -tpattern alt-z -wsinc5 -prefix out.nii synthetic/tshift/dtypes/int16-negative-slope.nii.gz | Bit-identical | Bit-identical | 15/15 · 14/14 |
methods/dtypes/int16-negative-slope-wsinc9 | interpolation methods | -wsinc9, -tpattern alt-z, on dtypes/int16-negative-slopecommand line3dTshift -tpattern alt-z -wsinc9 -prefix out.nii synthetic/tshift/dtypes/int16-negative-slope.nii.gz | Bit-identical | Bit-identical | 15/15 · 14/14 |
methods/dtypes/int16-slope-inter-linear | interpolation methods | -linear, -tpattern alt-z, on dtypes/int16-slope-intercommand line3dTshift -tpattern alt-z -linear -prefix out.nii synthetic/tshift/dtypes/int16-slope-inter.nii.gz | Bit-identical | Bit-identical | 14/14 |
methods/dtypes/int16-slope-inter-cubic | interpolation methods | -cubic, -tpattern alt-z, on dtypes/int16-slope-intercommand line3dTshift -tpattern alt-z -cubic -prefix out.nii synthetic/tshift/dtypes/int16-slope-inter.nii.gz | Bit-identical | Bit-identical | 14/14 |
methods/dtypes/int16-slope-inter-quintic | interpolation methods | -quintic, -tpattern alt-z, on dtypes/int16-slope-intercommand line3dTshift -tpattern alt-z -quintic -prefix out.nii synthetic/tshift/dtypes/int16-slope-inter.nii.gz | Bit-identical | Bit-identical | 14/14 |
methods/dtypes/int16-slope-inter-heptic | interpolation methods | -heptic, -tpattern alt-z, on dtypes/int16-slope-intercommand line3dTshift -tpattern alt-z -heptic -prefix out.nii synthetic/tshift/dtypes/int16-slope-inter.nii.gz | Bit-identical | Bit-identical | 14/14 |
methods/dtypes/int16-slope-inter-wsinc5 | interpolation methods | -wsinc5, -tpattern alt-z, on dtypes/int16-slope-intercommand line3dTshift -tpattern alt-z -wsinc5 -prefix out.nii synthetic/tshift/dtypes/int16-slope-inter.nii.gz | Bit-identical | Bit-identical | 14/14 |
methods/dtypes/int16-slope-inter-wsinc9 | interpolation methods | -wsinc9, -tpattern alt-z, on dtypes/int16-slope-intercommand line3dTshift -tpattern alt-z -wsinc9 -prefix out.nii synthetic/tshift/dtypes/int16-slope-inter.nii.gz | Bit-identical | Bit-identical | 14/14 |
methods/dtypes/int16-slope-linear | interpolation methods | -linear, -tpattern alt-z, on dtypes/int16-slopecommand line3dTshift -tpattern alt-z -linear -prefix out.nii synthetic/tshift/dtypes/int16-slope.nii.gz | Bit-identical | Bit-identical | 14/14 |
methods/dtypes/int16-slope-cubic | interpolation methods | -cubic, -tpattern alt-z, on dtypes/int16-slopecommand line3dTshift -tpattern alt-z -cubic -prefix out.nii synthetic/tshift/dtypes/int16-slope.nii.gz | Bit-identical | Bit-identical | 14/14 |
methods/dtypes/int16-slope-quintic | interpolation methods | -quintic, -tpattern alt-z, on dtypes/int16-slopecommand line3dTshift -tpattern alt-z -quintic -prefix out.nii synthetic/tshift/dtypes/int16-slope.nii.gz | Bit-identical | Bit-identical | 14/14 |
methods/dtypes/int16-slope-heptic | interpolation methods | -heptic, -tpattern alt-z, on dtypes/int16-slopecommand line3dTshift -tpattern alt-z -heptic -prefix out.nii synthetic/tshift/dtypes/int16-slope.nii.gz | Bit-identical | Bit-identical | 14/14 |
methods/dtypes/int16-slope-wsinc5 | interpolation methods | -wsinc5, -tpattern alt-z, on dtypes/int16-slopecommand line3dTshift -tpattern alt-z -wsinc5 -prefix out.nii synthetic/tshift/dtypes/int16-slope.nii.gz | Bit-identical | Bit-identical | 14/14 |
methods/dtypes/int16-slope-wsinc9 | interpolation methods | -wsinc9, -tpattern alt-z, on dtypes/int16-slopecommand line3dTshift -tpattern alt-z -wsinc9 -prefix out.nii synthetic/tshift/dtypes/int16-slope.nii.gz | Bit-identical | Bit-identical | 14/14 |
methods/dtypes/int16-linear | interpolation methods | -linear, -tpattern alt-z, on dtypes/int16command line3dTshift -tpattern alt-z -linear -prefix out.nii synthetic/tshift/dtypes/int16.nii.gz | Bit-identical | Bit-identical | 15/15 |
methods/dtypes/int16-cubic | interpolation methods | -cubic, -tpattern alt-z, on dtypes/int16command line3dTshift -tpattern alt-z -cubic -prefix out.nii synthetic/tshift/dtypes/int16.nii.gz | Bit-identical | Bit-identical | 15/15 |
methods/dtypes/int16-quintic | interpolation methods | -quintic, -tpattern alt-z, on dtypes/int16command line3dTshift -tpattern alt-z -quintic -prefix out.nii synthetic/tshift/dtypes/int16.nii.gz | Bit-identical | Bit-identical | 15/15 |
methods/dtypes/int16-heptic | interpolation methods | -heptic, -tpattern alt-z, on dtypes/int16command line3dTshift -tpattern alt-z -heptic -prefix out.nii synthetic/tshift/dtypes/int16.nii.gz | Bit-identical | Bit-identical | 15/15 |
methods/dtypes/int16-wsinc5 | interpolation methods | -wsinc5, -tpattern alt-z, on dtypes/int16command line3dTshift -tpattern alt-z -wsinc5 -prefix out.nii synthetic/tshift/dtypes/int16.nii.gz | Bit-identical | Bit-identical | 15/15 |
methods/dtypes/int16-wsinc9 | interpolation methods | -wsinc9, -tpattern alt-z, on dtypes/int16command line3dTshift -tpattern alt-z -wsinc9 -prefix out.nii synthetic/tshift/dtypes/int16.nii.gz | Bit-identical | Bit-identical | 15/15 |
methods/dtypes/int32-linear | interpolation methods | -linear, -tpattern alt-z, on dtypes/int32command line3dTshift -tpattern alt-z -linear -prefix out.nii synthetic/tshift/dtypes/int32.nii.gz | Bit-identical | Bit-identical | 14/14 |
methods/dtypes/int32-cubic | interpolation methods | -cubic, -tpattern alt-z, on dtypes/int32command line3dTshift -tpattern alt-z -cubic -prefix out.nii synthetic/tshift/dtypes/int32.nii.gz | Bit-identical | Bit-identical | 14/14 |
methods/dtypes/int32-quintic | interpolation methods | -quintic, -tpattern alt-z, on dtypes/int32command line3dTshift -tpattern alt-z -quintic -prefix out.nii synthetic/tshift/dtypes/int32.nii.gz | Bit-identical | Bit-identical | 14/14 |
methods/dtypes/int32-heptic | interpolation methods | -heptic, -tpattern alt-z, on dtypes/int32command line3dTshift -tpattern alt-z -heptic -prefix out.nii synthetic/tshift/dtypes/int32.nii.gz | Bit-identical | Bit-identical | 14/14 |
methods/dtypes/int32-wsinc5 | interpolation methods | -wsinc5, -tpattern alt-z, on dtypes/int32command line3dTshift -tpattern alt-z -wsinc5 -prefix out.nii synthetic/tshift/dtypes/int32.nii.gz | Bit-identical | Bit-identical | 14/14 |
methods/dtypes/int32-wsinc9 | interpolation methods | -wsinc9, -tpattern alt-z, on dtypes/int32command line3dTshift -tpattern alt-z -wsinc9 -prefix out.nii synthetic/tshift/dtypes/int32.nii.gz | Bit-identical | Bit-identical | 14/14 |
methods/dtypes/uint8-linear | interpolation methods | -linear, -tpattern alt-z, on dtypes/uint8command line3dTshift -tpattern alt-z -linear -prefix out.nii synthetic/tshift/dtypes/uint8.nii.gz | Bit-identical | Bit-identical | 15/15 |
methods/dtypes/uint8-cubic | interpolation methods | -cubic, -tpattern alt-z, on dtypes/uint8command line3dTshift -tpattern alt-z -cubic -prefix out.nii synthetic/tshift/dtypes/uint8.nii.gz | Bit-identical | Bit-identical | 15/15 |
methods/dtypes/uint8-quintic | interpolation methods | -quintic, -tpattern alt-z, on dtypes/uint8command line3dTshift -tpattern alt-z -quintic -prefix out.nii synthetic/tshift/dtypes/uint8.nii.gz | Bit-identical | Bit-identical | 15/15 |
methods/dtypes/uint8-heptic | interpolation methods | -heptic, -tpattern alt-z, on dtypes/uint8command line3dTshift -tpattern alt-z -heptic -prefix out.nii synthetic/tshift/dtypes/uint8.nii.gz | Bit-identical | Bit-identical | 15/15 |
methods/dtypes/uint8-wsinc5 | interpolation methods | -wsinc5, -tpattern alt-z, on dtypes/uint8command line3dTshift -tpattern alt-z -wsinc5 -prefix out.nii synthetic/tshift/dtypes/uint8.nii.gz | Bit-identical | Bit-identical | 15/15 |
methods/dtypes/uint8-wsinc9 | interpolation methods | -wsinc9, -tpattern alt-z, on dtypes/uint8command line3dTshift -tpattern alt-z -wsinc9 -prefix out.nii synthetic/tshift/dtypes/uint8.nii.gz | Bit-identical | Bit-identical | 15/15 |
options/float32-ignore | options | -ignore 3: three leading points kept out of fit and shift (float32)command line3dTshift -tpattern alt+z -ignore 3 -prefix out.nii synthetic/tshift/dtypes/float32.nii.gz | Bit-identical | Open difference 170 values differ from AFNI’s, within the record’s thresholds: AFNI’s Fourier shift is float32, the clean room’s double precision. | 15/15 |
options/float32-tzero-0 | options | -tzero 0: every slice moved to the start of the TR (float32)command line3dTshift -tpattern alt+z -tzero 0 -prefix out.nii synthetic/tshift/dtypes/float32.nii.gz | Bit-identical | Open difference 117 values differ from AFNI’s, within the record’s thresholds: AFNI’s Fourier shift is float32, the clean room’s double precision. | 15/15 |
options/float32-tzero-0.5 | options | -tzero 0.5 (float32)command line3dTshift -tpattern alt+z -tzero 0.5 -prefix out.nii synthetic/tshift/dtypes/float32.nii.gz | Bit-identical | Open difference 113 values differ from AFNI’s, within the record’s thresholds: AFNI’s Fourier shift is float32, the clean room’s double precision. | 15/15 |
options/float32-tzero-beyond-tr | options | -tzero 5: beyond the TR (allowed) (float32)command line3dTshift -tpattern alt+z -tzero 5 -prefix out.nii synthetic/tshift/dtypes/float32.nii.gz | Bit-identical | Open difference 117 values differ from AFNI’s, within the record’s thresholds: AFNI’s Fourier shift is float32, the clean room’s double precision. | 15/15 |
options/float32-slice-2 | options | -slice 2: align to slice 2's time (float32)command line3dTshift -tpattern alt+z -slice 2 -prefix out.nii synthetic/tshift/dtypes/float32.nii.gz | Bit-identical | Open difference 113 values differ from AFNI’s, within the record’s thresholds: AFNI’s Fourier shift is float32, the clean room’s double precision. | 15/15 |
options/float32-slice-wins | options | -tzero and -slice: -slice wins (float32)command line3dTshift -tpattern alt+z -tzero 0.5 -slice 1 -prefix out.nii synthetic/tshift/dtypes/float32.nii.gz | Bit-identical | Open difference 139 values differ from AFNI’s, within the record’s thresholds: AFNI’s Fourier shift is float32, the clean room’s double precision. | 15/15 |
options/float32-rlt | options | -rlt: no trend added back (float32)command line3dTshift -tpattern alt+z -rlt -prefix out.nii synthetic/tshift/dtypes/float32.nii.gz | Bit-identical | Open difference 2,970 values differ from AFNI’s, within the record’s thresholds: AFNI’s Fourier shift is float32, the clean room’s double precision. | 15/15 |
options/float32-rlt+ | options | -rlt+: only the intercept added back (float32)command line3dTshift -tpattern alt+z -rlt+ -prefix out.nii synthetic/tshift/dtypes/float32.nii.gz | Bit-identical | Open difference 168 values differ from AFNI’s, within the record’s thresholds: AFNI’s Fourier shift is float32, the clean room’s double precision. | 15/15 |
options/float32-rlt-last-wins | options | -rlt then -rlt+: the last wins (float32)command line3dTshift -tpattern alt+z -rlt -rlt+ -prefix out.nii synthetic/tshift/dtypes/float32.nii.gz | Bit-identical | Open difference 168 values differ from AFNI’s, within the record’s thresholds: AFNI’s Fourier shift is float32, the clean room’s double precision. | 15/15 |
options/float32-no-detrend | options | -heptic -no_detrend: mean removed only (float32)command line3dTshift -tpattern alt+z -heptic -no_detrend -prefix out.nii synthetic/tshift/dtypes/float32.nii.gz | Bit-identical | Bit-identical | 15/15 |
options/float32-no-detrend-fourier | options | -no_detrend then -Fourier (allowed, with a warning) (float32)command line3dTshift -tpattern alt+z -quintic -no_detrend -Fourier -prefix out.nii synthetic/tshift/dtypes/float32.nii.gz | Bit-identical | Open difference 158 values differ from AFNI’s, within the record’s thresholds: AFNI’s Fourier shift is float32, the clean room’s double precision. | 15/15 |
options/float32-TR-seconds | options | -TR 2.5s (float32)command line3dTshift -tpattern alt+z -TR 2.5s -prefix out.nii synthetic/tshift/dtypes/float32.nii.gz | Bit-identical | Open difference 168 values differ from AFNI’s, within the record’s thresholds: AFNI’s Fourier shift is float32, the clean room’s double precision. | 15/15 |
options/float32-TR-plain | options | -TR 1.7 (no unit) (float32)command line3dTshift -tpattern alt+z -TR 1.7 -prefix out.nii synthetic/tshift/dtypes/float32.nii.gz | Bit-identical | Open difference 159 values differ from AFNI’s, within the record’s thresholds: AFNI’s Fourier shift is float32, the clean room’s double precision. | 15/15 |
options/float32-TR-ms | options | -TR 2000ms: every time in milliseconds (float32)command line3dTshift -tpattern alt+z -TR 2000ms -prefix out.nii synthetic/tshift/dtypes/float32.nii.gz | Bit-identical | Open difference 168 values differ from AFNI’s, within the record’s thresholds: AFNI’s Fourier shift is float32, the clean room’s double precision. | 13/13 |
options/float32-TR-msec | options | -TR 2000msec -tzero 500 (float32)command line3dTshift -tpattern alt+z -TR 2000msec -tzero 500 -prefix out.nii synthetic/tshift/dtypes/float32.nii.gz | Bit-identical | Open difference 113 values differ from AFNI’s, within the record’s thresholds: AFNI’s Fourier shift is float32, the clean room’s double precision. | 13/13 |
options/float32-verbose | options | -verbose (float32)command line3dTshift -tpattern alt+z -verbose -prefix out.nii synthetic/tshift/dtypes/float32.nii.gz | Bit-identical | Open difference 168 values differ from AFNI’s, within the record’s thresholds: AFNI’s Fourier shift is float32, the clean room’s double precision. | 15/15 |
options/float32-abbreviations | options | -cub and -verb: AFNI's abbreviations (float32)command line3dTshift -tpattern alt+z -cub -verb -prefix out.nii synthetic/tshift/dtypes/float32.nii.gz | Bit-identical | Bit-identical | 15/15 |
options/float32-wsinc-case | options | -WSINC5: case-insensitive (float32)command line3dTshift -tpattern alt+z -WSINC5 -prefix out.nii synthetic/tshift/dtypes/float32.nii.gz | Bit-identical | Bit-identical | 15/15 |
options/float32-ignore-heptic | options | -ignore 5 with -heptic (float32)command line3dTshift -tpattern alt+z -ignore 5 -heptic -prefix out.nii synthetic/tshift/dtypes/float32.nii.gz | Bit-identical | Bit-identical | 15/15 |
options/float32-rlt-wsinc9 | options | -rlt with -wsinc9 (float32)command line3dTshift -tpattern alt+z -rlt -wsinc9 -prefix out.nii synthetic/tshift/dtypes/float32.nii.gz | Bit-identical | Bit-identical | 15/15 |
options/float32-rlt+-linear | options | -rlt+ with -linear (float32)command line3dTshift -tpattern alt+z -rlt+ -linear -prefix out.nii synthetic/tshift/dtypes/float32.nii.gz | Bit-identical | Bit-identical | 15/15 |
options/int16-ignore | options | -ignore 3: three leading points kept out of fit and shift (int16)command line3dTshift -tpattern alt+z -ignore 3 -prefix out.nii synthetic/tshift/dtypes/int16.nii.gz | Bit-identical | Bit-identical | 15/15 |
options/int16-tzero-0 | options | -tzero 0: every slice moved to the start of the TR (int16)command line3dTshift -tpattern alt+z -tzero 0 -prefix out.nii synthetic/tshift/dtypes/int16.nii.gz | Bit-identical | Bit-identical | 15/15 |
options/int16-tzero-0.5 | options | -tzero 0.5 (int16)command line3dTshift -tpattern alt+z -tzero 0.5 -prefix out.nii synthetic/tshift/dtypes/int16.nii.gz | Bit-identical | Bit-identical | 15/15 |
options/int16-tzero-beyond-tr | options | -tzero 5: beyond the TR (allowed) (int16)command line3dTshift -tpattern alt+z -tzero 5 -prefix out.nii synthetic/tshift/dtypes/int16.nii.gz | Bit-identical | Bit-identical | 15/15 |
options/int16-slice-2 | options | -slice 2: align to slice 2's time (int16)command line3dTshift -tpattern alt+z -slice 2 -prefix out.nii synthetic/tshift/dtypes/int16.nii.gz | Bit-identical | Bit-identical | 15/15 |
options/int16-slice-wins | options | -tzero and -slice: -slice wins (int16)command line3dTshift -tpattern alt+z -tzero 0.5 -slice 1 -prefix out.nii synthetic/tshift/dtypes/int16.nii.gz | Bit-identical | Bit-identical | 15/15 |
options/int16-rlt | options | -rlt: no trend added back (int16)command line3dTshift -tpattern alt+z -rlt -prefix out.nii synthetic/tshift/dtypes/int16.nii.gz | Bit-identical | Bit-identical | 15/15 |
options/int16-rlt+ | options | -rlt+: only the intercept added back (int16)command line3dTshift -tpattern alt+z -rlt+ -prefix out.nii synthetic/tshift/dtypes/int16.nii.gz | Bit-identical | Bit-identical | 15/15 |
options/int16-rlt-last-wins | options | -rlt then -rlt+: the last wins (int16)command line3dTshift -tpattern alt+z -rlt -rlt+ -prefix out.nii synthetic/tshift/dtypes/int16.nii.gz | Bit-identical | Bit-identical | 15/15 |
options/int16-no-detrend | options | -heptic -no_detrend: mean removed only (int16)command line3dTshift -tpattern alt+z -heptic -no_detrend -prefix out.nii synthetic/tshift/dtypes/int16.nii.gz | Bit-identical | Bit-identical | 15/15 |
options/int16-no-detrend-fourier | options | -no_detrend then -Fourier (allowed, with a warning) (int16)command line3dTshift -tpattern alt+z -quintic -no_detrend -Fourier -prefix out.nii synthetic/tshift/dtypes/int16.nii.gz | Bit-identical | Bit-identical | 15/15 |
options/int16-TR-seconds | options | -TR 2.5s (int16)command line3dTshift -tpattern alt+z -TR 2.5s -prefix out.nii synthetic/tshift/dtypes/int16.nii.gz | Bit-identical | Bit-identical | 15/15 |
options/int16-TR-plain | options | -TR 1.7 (no unit) (int16)command line3dTshift -tpattern alt+z -TR 1.7 -prefix out.nii synthetic/tshift/dtypes/int16.nii.gz | Bit-identical | Bit-identical | 15/15 |
options/int16-TR-ms | options | -TR 2000ms: every time in milliseconds (int16)command line3dTshift -tpattern alt+z -TR 2000ms -prefix out.nii synthetic/tshift/dtypes/int16.nii.gz | Bit-identical | Bit-identical | 13/13 |
options/int16-TR-msec | options | -TR 2000msec -tzero 500 (int16)command line3dTshift -tpattern alt+z -TR 2000msec -tzero 500 -prefix out.nii synthetic/tshift/dtypes/int16.nii.gz | Bit-identical | Bit-identical | 13/13 |
options/int16-verbose | options | -verbose (int16)command line3dTshift -tpattern alt+z -verbose -prefix out.nii synthetic/tshift/dtypes/int16.nii.gz | Bit-identical | Bit-identical | 15/15 |
options/int16-abbreviations | options | -cub and -verb: AFNI's abbreviations (int16)command line3dTshift -tpattern alt+z -cub -verb -prefix out.nii synthetic/tshift/dtypes/int16.nii.gz | Bit-identical | Bit-identical | 15/15 |
options/int16-wsinc-case | options | -WSINC5: case-insensitive (int16)command line3dTshift -tpattern alt+z -WSINC5 -prefix out.nii synthetic/tshift/dtypes/int16.nii.gz | Bit-identical | Bit-identical | 15/15 |
options/int16-ignore-heptic | options | -ignore 5 with -heptic (int16)command line3dTshift -tpattern alt+z -ignore 5 -heptic -prefix out.nii synthetic/tshift/dtypes/int16.nii.gz | Bit-identical | Bit-identical | 15/15 |
options/int16-rlt-wsinc9 | options | -rlt with -wsinc9 (int16)command line3dTshift -tpattern alt+z -rlt -wsinc9 -prefix out.nii synthetic/tshift/dtypes/int16.nii.gz | Bit-identical | Bit-identical | 15/15 |
options/int16-rlt+-linear | options | -rlt+ with -linear (int16)command line3dTshift -tpattern alt+z -rlt+ -linear -prefix out.nii synthetic/tshift/dtypes/int16.nii.gz | Bit-identical | Bit-identical | 15/15 |
tpattern/alt+z | slice patterns (-tpattern) | -tpattern alt+zcommand line3dTshift -tpattern alt+z -prefix out.nii synthetic/tshift/dtypes/float32.nii.gz | Bit-identical | Open difference 168 values differ from AFNI’s, within the record’s thresholds: AFNI’s Fourier shift is float32, the clean room’s double precision. | 15/15 |
tpattern/altplus | slice patterns (-tpattern) | -tpattern altpluscommand line3dTshift -tpattern altplus -prefix out.nii synthetic/tshift/dtypes/float32.nii.gz | Bit-identical | Open difference 168 values differ from AFNI’s, within the record’s thresholds: AFNI’s Fourier shift is float32, the clean room’s double precision. | 15/15 |
tpattern/alt+z2 | slice patterns (-tpattern) | -tpattern alt+z2command line3dTshift -tpattern alt+z2 -prefix out.nii synthetic/tshift/dtypes/float32.nii.gz | Bit-identical | Open difference 154 values differ from AFNI’s, within the record’s thresholds: AFNI’s Fourier shift is float32, the clean room’s double precision. | 15/15 |
tpattern/alt-z | slice patterns (-tpattern) | -tpattern alt-zcommand line3dTshift -tpattern alt-z -prefix out.nii synthetic/tshift/dtypes/float32.nii.gz | Bit-identical | Open difference 148 values differ from AFNI’s, within the record’s thresholds: AFNI’s Fourier shift is float32, the clean room’s double precision. | 15/15 |
tpattern/altminus | slice patterns (-tpattern) | -tpattern altminuscommand line3dTshift -tpattern altminus -prefix out.nii synthetic/tshift/dtypes/float32.nii.gz | Bit-identical | Open difference 148 values differ from AFNI’s, within the record’s thresholds: AFNI’s Fourier shift is float32, the clean room’s double precision. | 15/15 |
tpattern/alt-z2 | slice patterns (-tpattern) | -tpattern alt-z2command line3dTshift -tpattern alt-z2 -prefix out.nii synthetic/tshift/dtypes/float32.nii.gz | Bit-identical | Open difference 153 values differ from AFNI’s, within the record’s thresholds: AFNI’s Fourier shift is float32, the clean room’s double precision. | 15/15 |
tpattern/seq+z | slice patterns (-tpattern) | -tpattern seq+zcommand line3dTshift -tpattern seq+z -prefix out.nii synthetic/tshift/dtypes/float32.nii.gz | Bit-identical | Open difference 165 values differ from AFNI’s, within the record’s thresholds: AFNI’s Fourier shift is float32, the clean room’s double precision. | 15/15 |
tpattern/seqplus | slice patterns (-tpattern) | -tpattern seqpluscommand line3dTshift -tpattern seqplus -prefix out.nii synthetic/tshift/dtypes/float32.nii.gz | Bit-identical | Open difference 165 values differ from AFNI’s, within the record’s thresholds: AFNI’s Fourier shift is float32, the clean room’s double precision. | 15/15 |
tpattern/seq-z | slice patterns (-tpattern) | -tpattern seq-zcommand line3dTshift -tpattern seq-z -prefix out.nii synthetic/tshift/dtypes/float32.nii.gz | Bit-identical | Open difference 151 values differ from AFNI’s, within the record’s thresholds: AFNI’s Fourier shift is float32, the clean room’s double precision. | 15/15 |
tpattern/seqminus | slice patterns (-tpattern) | -tpattern seqminuscommand line3dTshift -tpattern seqminus -prefix out.nii synthetic/tshift/dtypes/float32.nii.gz | Bit-identical | Open difference 151 values differ from AFNI’s, within the record’s thresholds: AFNI’s Fourier shift is float32, the clean room’s double precision. | 15/15 |
tpattern/zero | slice patterns (-tpattern) | -tpattern zerocommand line3dTshift -tpattern zero -prefix out.nii synthetic/tshift/dtypes/float32.nii.gz | Bit-identical | Bit-identical | 15/15 |
tpattern/simult | slice patterns (-tpattern) | -tpattern simultcommand line3dTshift -tpattern simult -prefix out.nii synthetic/tshift/dtypes/float32.nii.gz | Bit-identical | Bit-identical | 15/15 |
tpattern/file-tabs | slice patterns (-tpattern) | -tpattern @file: one line, tab-separated (as fMRIPrep writes it)command line3dTshift -tpattern @st.1D -prefix out.nii synthetic/tshift/dtypes/float32.nii.gz | Bit-identical | Open difference 168 values differ from AFNI’s, within the record’s thresholds: AFNI’s Fourier shift is float32, the clean room’s double precision. | 13/13 |
tpattern/file-lines | slice patterns (-tpattern) | -tpattern @file: one value per linecommand line3dTshift -tpattern @st.1D -prefix out.nii synthetic/tshift/dtypes/float32.nii.gz | Bit-identical | Open difference 148 values differ from AFNI’s, within the record’s thresholds: AFNI’s Fourier shift is float32, the clean room’s double precision. | 13/13 |
tpattern/file-matrix | slice patterns (-tpattern) | -tpattern @file: two columns: read column by columncommand line3dTshift -tpattern @st.1D -prefix out.nii synthetic/tshift/dtypes/float32.nii.gz | Bit-identical | Open difference 148 values differ from AFNI’s, within the record’s thresholds: AFNI’s Fourier shift is float32, the clean room’s double precision. | 13/13 |
tpattern/file-comments | slice patterns (-tpattern) | -tpattern @file: comments and commascommand line3dTshift -tpattern @st.1D -prefix out.nii synthetic/tshift/dtypes/float32.nii.gz | Bit-identical | Open difference 171 values differ from AFNI’s, within the record’s thresholds: AFNI’s Fourier shift is float32, the clean room’s double precision. | 13/13 |
tpattern/file-extra | slice patterns (-tpattern) | -tpattern @file: more values than slicescommand line3dTshift -tpattern @st.1D -prefix out.nii synthetic/tshift/dtypes/float32.nii.gz | Bit-identical | Open difference 168 values differ from AFNI’s, within the record’s thresholds: AFNI’s Fourier shift is float32, the clean room’s double precision. | 13/13 |
tpattern/file-repeat | slice patterns (-tpattern) | -tpattern @file: N@value repetitioncommand line3dTshift -tpattern @st.1D -prefix out.nii synthetic/tshift/dtypes/float32.nii.gz | Bit-identical | Open difference 165 values differ from AFNI’s, within the record’s thresholds: AFNI’s Fourier shift is float32, the clean room’s double precision. | 13/13 |
tpattern/file-tr | slice patterns (-tpattern) | -tpattern @file: a value equal to the TRcommand line3dTshift -tpattern @st.1D -prefix out.nii synthetic/tshift/dtypes/float32.nii.gz | Bit-identical | Open difference 182 values differ from AFNI’s, within the record’s thresholds: AFNI’s Fourier shift is float32, the clean room’s double precision. | 13/13 |
tpattern/inline-1D | slice patterns (-tpattern) | -tpattern '@1D: 0 1 0.5 1.5'command line3dTshift -tpattern '@1D: 0 1 0.5 1.5' -prefix out.nii synthetic/tshift/dtypes/float32.nii.gz | Bit-identical | Open difference 168 values differ from AFNI’s, within the record’s thresholds: AFNI’s Fourier shift is float32, the clean room’s double precision. | 13/13 |
methods/glibc-sinf-wsinc5 | interpolation methods | -wsinc5 -tpattern '@1D: 0 0.543 0.102 0.728': weights where glibc's sinf and cosf differ from the correctly rounded ones (GLIBC-07)command line3dTshift -tpattern '@1D: 0 0.543 0.102 0.728' -wsinc5 -prefix out.nii synthetic/tshift/dtypes/float32.nii.gz | Bit-identical | Bit-identical | 13/13 |
methods/glibc-sinf-wsinc9 | interpolation methods | -wsinc9 -tpattern '@1D: 0 0.911 1.821 0.603': weights where glibc's sinf and cosf differ from the correctly rounded ones (GLIBC-07)command line3dTshift -tpattern '@1D: 0 0.911 1.821 0.603' -wsinc9 -prefix out.nii synthetic/tshift/dtypes/float32.nii.gz | Bit-identical | Bit-identical | 13/13 |
header-timing/code1-seq-inc | slice times from the header | no -tpattern, slice_code 1 (sequential increasing)command line3dTshift -cubic -prefix out.nii '<generated: code1-seq-inc>' | Bit-identical | Bit-identical | 13/13 |
header-timing/code2-seq-dec | slice times from the header | no -tpattern, slice_code 2: AFNI gives every slice time 0command line3dTshift -cubic -prefix out.nii '<generated: code2-seq-dec>' | Bit-identical | Bit-identical | 13/13 |
header-timing/code3-alt-inc | slice times from the header | no -tpattern, slice_code 3 (alternating increasing)command line3dTshift -cubic -prefix out.nii '<generated: code3-alt-inc>' | Bit-identical | Bit-identical | 13/13 |
header-timing/code4-alt-dec | slice times from the header | no -tpattern, slice_code 4 (alternating decreasing)command line3dTshift -cubic -prefix out.nii '<generated: code4-alt-dec>' | Bit-identical | Bit-identical | 13/13 |
header-timing/code5-alt-inc2 | slice times from the header | no -tpattern, slice_code 5 (alternating increasing, from slice 1)command line3dTshift -cubic -prefix out.nii '<generated: code5-alt-inc2>' | Bit-identical | Bit-identical | 13/13 |
header-timing/code6-alt-dec2 | slice times from the header | no -tpattern, slice_code 6 (alternating decreasing, from nz-2)command line3dTshift -cubic -prefix out.nii '<generated: code6-alt-dec2>' | Bit-identical | Bit-identical | 13/13 |
header-timing/code3-partial | slice times from the header | no -tpattern, slice_code 3 over slices 1..2 onlycommand line3dTshift -cubic -prefix out.nii '<generated: code3-partial>' | Bit-identical | Bit-identical | 13/13 |
header-timing/code3-ms | slice times from the header | no -tpattern, slice_code 3 with the TR and duration in millisecondscommand line3dTshift -cubic -prefix out.nii '<generated: code3-ms>' | Bit-identical | Bit-identical | 13/13 |
header-timing/code3-beyond-tr | slice times from the header | no -tpattern, times beyond the TR: a copy of the input, timing keptcommand line3dTshift -cubic -prefix out.nii '<generated: code3-beyond-tr>' | Bit-identical | Bit-identical | 13/13 |
header-timing/code2-beyond-tr | slice times from the header | no -tpattern, slice_code 2: AFNI gives every slice time 0 and shifts nothing; corrected, the times exceed the TR and the output is a copy (AFNI-03)command line3dTshift -cubic -prefix out.nii '<generated: code2-beyond-tr>' | Bit-identical | Bit-identical | 13/13 |
header-timing/code3-no-slice-dim | slice times from the header | no -tpattern, no slice axis in dim_info: no timing, a copycommand line3dTshift -cubic -prefix out.nii '<generated: code3-no-slice-dim>' | Bit-identical | Bit-identical | 13/13 |
header-timing/code3-zero-duration | slice times from the header | no -tpattern, slice_duration 0: no timing, a copycommand line3dTshift -cubic -prefix out.nii '<generated: code3-zero-duration>' | Bit-identical | Bit-identical | 13/13 |
header-timing/tpattern-overrides | slice times from the header | -tpattern overrides the header's timingcommand line3dTshift -tpattern seq-z -prefix out.nii '<generated: code3-alt-inc>' | Bit-identical | Open difference 151 values differ from AFNI’s, within the record’s thresholds: AFNI’s Fourier shift is float32, the clean room’s double precision. | 15/15 |
defects/f32-slope-inter | defects of AFNI | float32 with scl_slope 2 and scl_inter 10, shifted (AFNI-02)command line3dTshift -tpattern alt+z -linear -prefix out.nii '<generated: d13-f32-slope-inter>' | Bit-identical | Bit-identical | 15/15 · 14/14 |
defects/f32-slope-inter-copy | defects of AFNI | float32 with scl_slope 2 and scl_inter 10, a copy (AFNI-02)command line3dTshift -prefix out.nii '<generated: d13-f32-slope-inter>' | Bit-identical | Bit-identical | 14/14 · 13/13 |
defects/metre | defects of AFNI | units in metres with an origin (AFNI-07)command line3dTshift -tpattern alt+z -prefix out.nii '<generated: d13-metre>' | Bit-identical | Open difference 168 values differ from AFNI’s, within the record’s thresholds: AFNI’s Fourier shift is float32, the clean room’s double precision. | 16/16 · 15/15 |
defects/micron-copy | defects of AFNI | units in micrometres with an origin, a copy (AFNI-07)command line3dTshift -prefix out.nii '<generated: d13-micron>' | Bit-identical | Bit-identical | 14/14 · 13/13 |
defects/negative-slope-zero | defects of AFNI | int16 with scl_slope -0.5 and -tpattern zero: nothing is shifted, so AFNI-01 changes nothingcommand line3dTshift -tpattern zero -prefix out.nii synthetic/tshift/dtypes/int16-negative-slope.nii.gz | Bit-identical | Bit-identical | 15/15 · 14/14 |
defects/oblique-metre | defects of AFNI | units in metres, an oblique sform with an origin (AFNI-07)command line3dTshift -tpattern alt+z -prefix out.nii '<generated: d13-oblique-metre>' | Bit-identical | Open difference 168 values differ from AFNI’s, within the record’s thresholds: AFNI’s Fourier shift is float32, the clean room’s double precision. | 16/16 · 15/15 |
defects/tiny-offsets-copy | defects of AFNI | header slice times 0.5 ms apart beyond a 1 ms TR: a copy of the input that keeps them, all within 3 ms of 0 (AFNI-08)command line3dTshift -prefix out.nii '<generated: d13-tiny-offsets>' | Bit-identical | Bit-identical | 14/14 · 13/13 |
geometry/slightly-oblique | geometry | an sform 0.006° from plumb (AFNI writes the plumb matrix below about 0.014°, AFNI-16)command line3dTshift -tpattern alt+z -prefix out.nii '<generated: slightly-oblique>' | Bit-identical | Open difference 168 values differ from AFNI’s, within the record’s thresholds: AFNI’s Fourier shift is float32, the clean room’s double precision. | 16/16 · 15/15 |
geometry/slightly-oblique-qform | geometry | a qform only, 0.006° from plumb: AFNI writes the plumb matrix with the header's voxel sizes as steps (AFNI-16)command line3dTshift -tpattern alt+z -prefix out.nii '<generated: slightly-oblique-qform>' | Bit-identical | Open difference 168 values differ from AFNI’s, within the record’s thresholds: AFNI’s Fourier shift is float32, the clean room’s double precision. | 16/16 · 15/15 |
geometry/slightly-oblique-metre | geometry | an sform in metres 0.006° from plumb: AFNI writes the plumb matrix, its steps in millimetres and its origin in metres (AFNI-16, AFNI-07)command line3dTshift -tpattern alt+z -prefix out.nii '<generated: d13-slightly-oblique-metre>' | Bit-identical | Open difference 168 values differ from AFNI’s, within the record’s thresholds: AFNI’s Fourier shift is float32, the clean room’s double precision. | 16/16 · 15/15 |
defects/oblique-metre-zero-origin | defects of AFNI | units in metres, an oblique sform at the origin: AFNI keeps the whole sform in metres (AFNI-07)command line3dTshift -tpattern alt+z -prefix out.nii '<generated: d13-oblique-metre-origin0>' | Bit-identical | Open difference 168 values differ from AFNI’s, within the record’s thresholds: AFNI’s Fourier shift is float32, the clean room’s double precision. | 16/16 · 15/15 |
copy/short-slice-spacing | copies of the input | header slice times 2 ms apart beyond a 5 ms TR: a copy, whose slice fields AFNI derives from the times within 3 ms (slice_start 1)command line3dTshift -prefix out.nii '<generated: d13-short-slices>' | Bit-identical | Bit-identical | 13/13 |
copy/alt-two-slices | copies of the input | header slice code 3 over slices 1..2, beyond the TR: a copy, written with slice code 1command line3dTshift -prefix out.nii '<generated: d13-alt-two-slices>' | Bit-identical | Bit-identical | 13/13 |
copy/no-timing-int16 | copies of the input | no slice timing anywhere: the output is a copy of the input (int16)command line3dTshift -prefix out.nii synthetic/tshift/dtypes/int16.nii.gz | Bit-identical | Bit-identical | 13/13 |
copy/no-timing-int16-slope | copies of the input | no slice timing anywhere: the output is a copy of the input (int16 with a brick factor)command line3dTshift -prefix out.nii synthetic/tshift/dtypes/int16-slope.nii.gz | Bit-identical | Bit-identical | 13/13 |
copy/no-timing-int16-slope-inter | copies of the input | no slice timing anywhere: the output is a copy of the input (int16 scaled to float32)command line3dTshift -prefix out.nii synthetic/tshift/dtypes/int16-slope-inter.nii.gz | Bit-identical | Bit-identical | 13/13 |
copy/no-timing-float64 | copies of the input | no slice timing anywhere: the output is a copy of the input (float64 converted to float32)command line3dTshift -prefix out.nii synthetic/tshift/dtypes/float64.nii.gz | Bit-identical | Bit-identical | 13/13 |
copy/no-timing-float32-nonfinite | copies of the input | no slice timing anywhere: the output is a copy of the input (non-finite floats zeroed)command line3dTshift -prefix out.nii synthetic/tshift/dtypes/float32-nonfinite.nii.gz | Bit-identical | Bit-identical | 13/13 |
copy/3d-input | copies of the input | a 3D image: one value per voxel, written back as 3Dcommand line3dTshift -tpattern alt+z -prefix out.nii synthetic/resampling/images/axial-1mm.nii.gz | Bit-identical | Bit-identical | 13/13 |
errors/unknown-option | errors | an unknown optioncommand line3dTshift -bogus -prefix out.nii synthetic/tshift/dtypes/float32.nii.gz | Rejected by both AFNI: ** FATAL ERROR: Unknown option: -bogus; the replica: ** FATAL ERROR: Unknown option: -bogus | Rejected by both AFNI: ** FATAL ERROR: Unknown option: -bogus; the clean room: ** FATAL ERROR: Unknown option: -bogus | 1/1 |
errors/no-detrend-fourier | errors | -no_detrend while the method is Fouriercommand line3dTshift -no_detrend -prefix out.nii synthetic/tshift/dtypes/float32.nii.gz | Rejected by both AFNI: ** FATAL ERROR: found -no_detrend, changing default to -heptic; the replica: ** FATAL ERROR: found -no_detrend, changing default to -heptic | Rejected by both AFNI: ** FATAL ERROR: found -no_detrend, changing default to -heptic; the clean room: ** FATAL ERROR: found -no_detrend, changing default to -heptic | 1/1 |
errors/rlt-no-detrend | errors | -rlt with -no_detrendcommand line3dTshift -linear -rlt -no_detrend -prefix out.nii synthetic/tshift/dtypes/float32.nii.gz | Rejected by both AFNI: ** FATAL ERROR: cannot use both -rlt and -no_detrend; the replica: ** FATAL ERROR: cannot use both -rlt and -no_detrend | Rejected by both AFNI: ** FATAL ERROR: cannot use both -rlt and -no_detrend; the clean room: ** FATAL ERROR: cannot use both -rlt and -no_detrend | 1/1 |
errors/unknown-pattern | errors | pattern names are case-sensitivecommand line3dTshift -tpattern ALT+Z -prefix out.nii synthetic/tshift/dtypes/float32.nii.gz | Rejected by both AFNI: ** ERROR: Unknown tpattern = ALT+Z; the replica: ** ERROR: Unknown tpattern = ALT+Z | Rejected by both AFNI: ** ERROR: Unknown tpattern = ALT+Z; the clean room: ** ERROR: Unknown tpattern = ALT+Z | 1/1 |
errors/slice-too-large | errors | -slice beyond the lastcommand line3dTshift -tpattern alt+z -slice 4 -prefix out.nii synthetic/tshift/dtypes/float32.nii.gz | Rejected by both AFNI: ** FATAL ERROR: -slice value is too large (4 >= 4); the replica: ** FATAL ERROR: -slice value is too large (4 >= 4) | Rejected by both AFNI: ** FATAL ERROR: -slice value is too large (4 >= 4); the clean room: ** FATAL ERROR: -slice value is too large (4 >= 4) | 1/1 |
errors/ignore-too-large | errors | -ignore > nt - 5command line3dTshift -tpattern alt+z -ignore 96 -prefix out.nii synthetic/tshift/dtypes/float32.nii.gz | Rejected by both AFNI: ** FATAL ERROR: -ignore value 96 is too large; the replica: ** FATAL ERROR: -ignore value 96 is too large | Rejected by both AFNI: ** FATAL ERROR: -ignore value 96 is too large; the clean room: ** FATAL ERROR: -ignore value 96 is too large | 1/1 |
errors/negative-tzero | errors | -tzero < 0command line3dTshift -tpattern alt+z -tzero -1 -prefix out.nii synthetic/tshift/dtypes/float32.nii.gz | Rejected by both AFNI: ** FATAL ERROR: illegal value ‘-1’ after -tzero!; the replica: ** FATAL ERROR: illegal value ‘-1’ after -tzero! | Rejected by both AFNI: ** FATAL ERROR: illegal value ‘-1’ after -tzero!; the clean room: ** FATAL ERROR: illegal value ‘-1’ after -tzero! | 1/1 |
errors/negative-ignore | errors | -ignore < 0command line3dTshift -tpattern alt+z -ignore -1 -prefix out.nii synthetic/tshift/dtypes/float32.nii.gz | Rejected by both AFNI: ** FATAL ERROR: -ignore value -1 is negative!; the replica: ** FATAL ERROR: -ignore value -1 is negative! | Rejected by both AFNI: ** FATAL ERROR: -ignore value -1 is negative!; the clean room: ** FATAL ERROR: -ignore value -1 is negative! | 1/1 |
errors/zero-TR | errors | -TR 0command line3dTshift -tpattern alt+z -TR 0 -prefix out.nii synthetic/tshift/dtypes/float32.nii.gz | Rejected by both AFNI: ** FATAL ERROR: illegal value ‘0’ after -TR!; the replica: ** FATAL ERROR: illegal value ‘0’ after -TR! | Rejected by both AFNI: ** FATAL ERROR: illegal value ‘0’ after -TR!; the clean room: ** FATAL ERROR: illegal value ‘0’ after -TR! | 1/1 |
errors/bad-TR | errors | -TR abccommand line3dTshift -tpattern alt+z -TR abc -prefix out.nii synthetic/tshift/dtypes/float32.nii.gz | Rejected by both AFNI: ** FATAL ERROR: illegal value ‘abc’ after -TR!; the replica: ** FATAL ERROR: illegal value ‘abc’ after -TR! | Rejected by both AFNI: ** FATAL ERROR: illegal value ‘abc’ after -TR!; the clean room: ** FATAL ERROR: illegal value ‘abc’ after -TR! | 1/1 |
errors/missing-file | errors | a missing -tpattern filecommand line3dTshift -tpattern @none.1D -prefix out.nii synthetic/tshift/dtypes/float32.nii.gz | Rejected by both AFNI: ** FATAL ERROR: Can’t read tpattern file | Rejected by both AFNI: ** FATAL ERROR: Can’t read tpattern file | 1/1 |
errors/file-too-short | errors | a -tpattern file with fewer values than slicescommand line3dTshift -tpattern @st.1D -prefix out.nii synthetic/tshift/dtypes/float32.nii.gz | Rejected by both AFNI: ** FATAL ERROR: tpattern file | Rejected by both AFNI: ** FATAL ERROR: tpattern file | 1/1 |
errors/file-beyond-tr | errors | a -tpattern value beyond the TRcommand line3dTshift -tpattern @st.1D -prefix out.nii synthetic/tshift/dtypes/float32.nii.gz | Rejected by both AFNI: ** FATAL ERROR: Illegal value 2.5 in tpattern file | Rejected by both AFNI: ** FATAL ERROR: Illegal value 2.5 in tpattern file | 1/1 |
errors/file-negative | errors | a negative -tpattern valuecommand line3dTshift -tpattern @st.1D -prefix out.nii synthetic/tshift/dtypes/float32.nii.gz | Rejected by both AFNI: ** FATAL ERROR: Illegal value -0.5 in tpattern file | Rejected by both AFNI: ** FATAL ERROR: Illegal value -0.5 in tpattern file | 1/1 |
errors/file-text | errors | a -tpattern file with textcommand line3dTshift -tpattern @st.1D -prefix out.nii synthetic/tshift/dtypes/float32.nii.gz | Rejected by both AFNI: ** FATAL ERROR: Can’t read tpattern file | Rejected by both AFNI: ** FATAL ERROR: Can’t read tpattern file | 1/1 |
errors/missing-dataset | errors | an input file that does not existcommand line3dTshift -tpattern alt+z -prefix out.nii missing | Rejected by both AFNI: ** FATAL ERROR: Can’t open input dataset ‘ | Rejected by both AFNI: ** FATAL ERROR: Can’t open input dataset ‘ | 1/1 |
errors/existing-output | errors | an output that exists already (AFNI exits 0 without writing; the replica exits 1, AFNI-11)command line3dTshift -tpattern alt+z -prefix out.nii synthetic/tshift/dtypes/float32.nii.gz | Rejected by both AFNI: ** ERROR: dataset NOT written to disk!; the replica: ** ERROR: dataset NOT written to disk! | Rejected by both AFNI: ** ERROR: dataset NOT written to disk!; the clean room: ** ERROR: dataset NOT written to disk! | 1/1 |
errors/prefix-with-blank | errors | a -prefix with a blank (AFNI refuses it; the replica writes it, AFNI-12)command line3dTshift -tpattern alt+z -prefix 'out put.nii' synthetic/tshift/dtypes/float32.nii.gz | Rejected by both AFNI: ** FATAL ERROR: illegal value ‘ | Rejected by both AFNI: ** FATAL ERROR: illegal value ‘ | 1/1 |
global/overwrite-after-dataset | global options | -overwrite after the dataset replaces an existing outputcommand line3dTshift -tpattern alt+z -prefix out.nii synthetic/tshift/dtypes/float32.nii.gz -overwrite | Bit-identical | Open difference 168 values differ from AFNI’s, within the record’s thresholds: AFNI’s Fourier shift is float32, the clean room’s double precision. | 16/16 |
global/overwrite-as-option-value | global options | -overwrite where -tpattern's value stands: taken out first, -tpattern reads alt+zcommand line3dTshift -tpattern -overwrite alt+z -prefix out.nii synthetic/tshift/dtypes/float32.nii.gz | Bit-identical | Open difference 168 values differ from AFNI’s, within the record’s thresholds: AFNI’s Fourier shift is float32, the clean room’s double precision. | 16/16 |
global/overwrite-copy | global options | -overwrite on a copy of the input (no slice timing)command line3dTshift -overwrite -prefix out.nii synthetic/tshift/dtypes/float32.nii.gz | Bit-identical | Bit-identical | 16/16 |
global/overwrite-no-existing-file | global options | -overwrite with no output to replacecommand line3dTshift -overwrite -tpattern alt+z -prefix out.nii synthetic/tshift/dtypes/float32.nii.gz | Bit-identical | Open difference 168 values differ from AFNI’s, within the record’s thresholds: AFNI’s Fourier shift is float32, the clean room’s double precision. | 16/16 |
global/overwrite-then-D | global options | -overwrite, then -DAFNI_DECONFLICT=YES: the later one wins (out_AA1.nii)command line3dTshift -overwrite -DAFNI_DECONFLICT=YES -tpattern alt+z -prefix out.nii synthetic/tshift/dtypes/float32.nii.gz | Bit-identical | Open difference 168 values differ from AFNI’s, within the record’s thresholds: AFNI’s Fourier shift is float32, the clean room’s double precision. | 16/16 |
global/D-deconflict-yes | global options | -DAFNI_DECONFLICT=YES: an existing output makes the run write out_AA1.niicommand line3dTshift -DAFNI_DECONFLICT=YES -tpattern alt+z -prefix out.nii synthetic/tshift/dtypes/float32.nii.gz | Bit-identical | Open difference 168 values differ from AFNI’s, within the record’s thresholds: AFNI’s Fourier shift is float32, the clean room’s double precision. | 17/17 |
global/D-deconflict-no | global options | -DAFNI_DECONFLICT=NO: an existing output stops the shift before the work (exit 1)command line3dTshift -DAFNI_DECONFLICT=NO -tpattern alt+z -prefix out.nii synthetic/tshift/dtypes/float32.nii.gz | Rejected by both AFNI exit 1: ** FATAL ERROR: output dataset already exists ‘./out.nii’; the replica exit 1: ** FATAL ERROR: output dataset already exists ‘./out.nii’ (the same messages) | Rejected by both AFNI exit 1: ** FATAL ERROR: output dataset already exists ‘./out.nii’; the clean room exit 1: ** FATAL ERROR: output dataset already exists ‘./out.nii’ (the same messages) | 3/3 |
global/D-wins-over-environment | global options | -DAFNI_DECONFLICT=OVERWRITE over AFNI_DECONFLICT=YES in the environmentcommand lineAFNI_DECONFLICT=YES 3dTshift -DAFNI_DECONFLICT=OVERWRITE -tpattern alt+z -prefix out.nii synthetic/tshift/dtypes/float32.nii.gz | Bit-identical | Open difference 168 values differ from AFNI’s, within the record’s thresholds: AFNI’s Fourier shift is float32, the clean room’s double precision. | 17/17 |
global/D-arbitrary-filenames | global options | -DAFNI_ALLOW_ARBITRARY_FILENAMES=YES: a -prefix with a blank is writtencommand line3dTshift -DAFNI_ALLOW_ARBITRARY_FILENAMES=YES -tpattern alt+z -prefix 'out put.nii' synthetic/tshift/dtypes/float32.nii.gz | Bit-identical | Open difference 168 values differ from AFNI’s, within the record’s thresholds: AFNI’s Fourier shift is float32, the clean room’s double precision. | 17/17 |
global/D-after-dataset | global options | -D after the dataset applies toocommand line3dTshift -tpattern alt+z -prefix 'out put.nii' synthetic/tshift/dtypes/float32.nii.gz -DAFNI_ALLOW_ARBITRARY_FILENAMES=YES | Bit-identical | Open difference 168 values differ from AFNI’s, within the record’s thresholds: AFNI’s Fourier shift is float32, the clean room’s double precision. | 16/16 |
global/D-as-option-value | global options | -D where -tpattern's value stands: taken out firstcommand line3dTshift -tpattern -DAFNI_ALLOW_ARBITRARY_FILENAMES=YES alt+z -prefix 'out put.nii' synthetic/tshift/dtypes/float32.nii.gz | Bit-identical | Open difference 168 values differ from AFNI’s, within the record’s thresholds: AFNI’s Fourier shift is float32, the clean room’s double precision. | 16/16 |
global/D-value-with-blank | global options | -DAFNI_ALLOW_ARBITRARY_FILENAMES=Y ES: AFNI sets 'Y=ES', still YEScommand line3dTshift '-DAFNI_ALLOW_ARBITRARY_FILENAMES=Y ES' -tpattern alt+z -prefix 'out put.nii' synthetic/tshift/dtypes/float32.nii.gz | Bit-identical | Open difference 168 values differ from AFNI’s, within the record’s thresholds: AFNI’s Fourier shift is float32, the clean room’s double precision. | 17/17 |
global/D-blank-before-value | global options | -DAFNI_ALLOW_ARBITRARY_FILENAMES= YES: AFNI sets '=YES', not YES: refusedcommand line3dTshift '-DAFNI_ALLOW_ARBITRARY_FILENAMES= YES' -tpattern alt+z -prefix 'out put.nii' synthetic/tshift/dtypes/float32.nii.gz | Rejected by both AFNI exit 1: ** FATAL ERROR: illegal value ‘out put.nii’ after -prefix; the replica exit 1: ** FATAL ERROR: illegal value ‘out put.nii’ after -prefix (the same messages) | Rejected by both AFNI exit 1: ** FATAL ERROR: illegal value ‘out put.nii’ after -prefix; the clean room exit 1: ** FATAL ERROR: illegal value ‘out put.nii’ after -prefix (the same messages) | 3/3 |
global/D-empty-value | global options | -DAFNI_ALLOW_ARBITRARY_FILENAMES= (no value) sets nothing: refusedcommand line3dTshift -DAFNI_ALLOW_ARBITRARY_FILENAMES= -tpattern alt+z -prefix 'out put.nii' synthetic/tshift/dtypes/float32.nii.gz | Rejected by both AFNI exit 1: ** FATAL ERROR: illegal value ‘out put.nii’ after -prefix; the replica exit 1: ** FATAL ERROR: illegal value ‘out put.nii’ after -prefix (the same messages) | Rejected by both AFNI exit 1: ** FATAL ERROR: illegal value ‘out put.nii’ after -prefix; the clean room exit 1: ** FATAL ERROR: illegal value ‘out put.nii’ after -prefix (the same messages) | 3/3 |
global/D-empty-name | global options | -D=YES (no name) sets nothingcommand line3dTshift -D=YES -tpattern alt+z -prefix 'out put.nii' synthetic/tshift/dtypes/float32.nii.gz | Rejected by both AFNI exit 1: ** FATAL ERROR: illegal value ‘out put.nii’ after -prefix; the replica exit 1: ** FATAL ERROR: illegal value ‘out put.nii’ after -prefix (the same messages) | Rejected by both AFNI exit 1: ** FATAL ERROR: illegal value ‘out put.nii’ after -prefix; the clean room exit 1: ** FATAL ERROR: illegal value ‘out put.nii’ after -prefix (the same messages) | 3/3 |
global/D-without-equals | global options | -DAFNI_ALLOW_ARBITRARY_FILENAMES (no '='): an unknown optioncommand line3dTshift -DAFNI_ALLOW_ARBITRARY_FILENAMES -tpattern alt+z -prefix out.nii synthetic/tshift/dtypes/float32.nii.gz | Rejected by both AFNI exit 1: ** FATAL ERROR: Unknown option: -DAFNI_ALLOW_ARBITRARY_FILENAMES; the replica exit 1: ** FATAL ERROR: Unknown option: -DAFNI_ALLOW_ARBITRARY_FILENAMES (the same messages) | Rejected by both AFNI exit 1: ** FATAL ERROR: Unknown option: -DAFNI_ALLOW_ARBITRARY_FILENAMES; the clean room exit 1: ** FATAL ERROR: Unknown option: -DAFNI_ALLOW_ARBITRARY_FILENAMES (the same messages) | 3/3 |
global/D-alone | global options | -D alone: an unknown optioncommand line3dTshift -D -tpattern alt+z -prefix out.nii synthetic/tshift/dtypes/float32.nii.gz | Rejected by both AFNI exit 1: ** FATAL ERROR: Unknown option: -D; the replica exit 1: ** FATAL ERROR: Unknown option: -D (the same messages) | Rejected by both AFNI exit 1: ** FATAL ERROR: Unknown option: -D; the clean room exit 1: ** FATAL ERROR: Unknown option: -D (the same messages) | 3/3 |
global/D-lowercase | global options | -d...=YES: not a global option, an unknown optioncommand line3dTshift -dAFNI_ALLOW_ARBITRARY_FILENAMES=YES -tpattern alt+z -prefix out.nii synthetic/tshift/dtypes/float32.nii.gz | Rejected by both AFNI exit 1: ** FATAL ERROR: Unknown option: -dAFNI_ALLOW_ARBITRARY_FILENAMES=YES; the replica exit 1: ** FATAL ERROR: Unknown option: -dAFNI_ALLOW_ARBITRARY_FILENAMES=YES (the same messages) | Rejected by both AFNI exit 1: ** FATAL ERROR: Unknown option: -dAFNI_ALLOW_ARBITRARY_FILENAMES=YES; the clean room exit 1: ** FATAL ERROR: Unknown option: -dAFNI_ALLOW_ARBITRARY_FILENAMES=YES (the same messages) | 3/3 |
global/D-message-prefix-with-blank | global options | -DAFNI_MESSAGE_PREFIX=a b: AFNI's messages start with 'a=b::' (AFNI-22)command line3dTshift '-DAFNI_MESSAGE_PREFIX=a b' -prefix out.nii synthetic/tshift/dtypes/float32.nii.gz | Bit-identical | Bit-identical | 16/16 |
global/D-unknown-variable | global options | -D of a variable 3dTshift does not read: no effectcommand line3dTshift -DAFNI_NOT_A_VARIABLE=1 -tpattern alt+z -prefix out.nii synthetic/tshift/dtypes/float32.nii.gz | Bit-identical | Open difference 168 values differ from AFNI’s, within the record’s thresholds: AFNI’s Fourier shift is float32, the clean room’s double precision. | 16/16 |
global/ok-1D-text | global options | -ok_1D_text: text in the -tpattern file is read as 0command line3dTshift -ok_1D_text -tpattern @st.1D -prefix out.nii synthetic/tshift/dtypes/float32.nii.gz | Bit-identical | Open difference 169 values differ from AFNI’s, within the record’s thresholds: AFNI’s Fourier shift is float32, the clean room’s double precision. | 16/16 |
global/skip-afnirc | global options | -skip_afnirc: acceptedcommand line3dTshift -skip_afnirc -tpattern alt+z -prefix out.nii synthetic/tshift/dtypes/float32.nii.gz | Bit-identical | Open difference 168 values differ from AFNI’s, within the record’s thresholds: AFNI’s Fourier shift is float32, the clean room’s double precision. | 16/16 |
environment/deconflict-overwrite | environment variables | AFNI_DECONFLICT=OVERWRITE: an existing output is replaced, with AFNI's warningcommand lineAFNI_DECONFLICT=OVERWRITE 3dTshift -tpattern alt+z -prefix out.nii synthetic/tshift/dtypes/float32.nii.gz | Bit-identical | Open difference 168 values differ from AFNI’s, within the record’s thresholds: AFNI’s Fourier shift is float32, the clean room’s double precision. | 17/17 |
environment/deconflict-yes | environment variables | AFNI_DECONFLICT=YES: the output goes to out_AA1.niicommand lineAFNI_DECONFLICT=YES 3dTshift -tpattern alt+z -prefix out.nii synthetic/tshift/dtypes/float32.nii.gz | Bit-identical | Open difference 168 values differ from AFNI’s, within the record’s thresholds: AFNI’s Fourier shift is float32, the clean room’s double precision. | 17/17 |
environment/deconflict-no-copy | environment variables | AFNI_DECONFLICT=NO on a copy: AFNI finds the output after the work, exit 0 (AFNI-11)command lineAFNI_DECONFLICT=NO 3dTshift -prefix out.nii synthetic/tshift/dtypes/float32.nii.gz | Rejected by both AFNI exit 0: ** ERROR: dataset NOT written to disk!; the replica exit 0: ** ERROR: dataset NOT written to disk! (the same messages) | Rejected by both AFNI exit 0: ** ERROR: dataset NOT written to disk!; the clean room exit 0: ** ERROR: dataset NOT written to disk! (the same messages) | 3/3 |
environment/arbitrary-filenames | environment variables | AFNI_ALLOW_ARBITRARY_FILENAMES=YES: a -prefix with a blank is writtencommand lineAFNI_ALLOW_ARBITRARY_FILENAMES=YES 3dTshift -tpattern alt+z -prefix 'out put.nii' synthetic/tshift/dtypes/float32.nii.gz | Bit-identical | Open difference 168 values differ from AFNI’s, within the record’s thresholds: AFNI’s Fourier shift is float32, the clean room’s double precision. | 17/17 |
environment/input-with-blank | environment variables | an input in a directory with a blank: AFNI reads a list of datasets and fails (AFNI-18)command line3dTshift -tpattern alt+z -prefix out.nii '<generated: blank-dir>' | Rejected by both AFNI exit 1: ** FATAL ERROR: Can’t open input dataset ‘ | Rejected by both AFNI exit 1: ** FATAL ERROR: Can’t open input dataset ‘ | 3/3 |
environment/path-spaces-ok | environment variables | AFNI_PATH_SPACES_OK=YES: an input in a directory with a blank is one filecommand lineAFNI_PATH_SPACES_OK=YES 3dTshift -tpattern alt+z -prefix out.nii '<generated: blank-dir>' | Bit-identical | Open difference 168 values differ from AFNI’s, within the record’s thresholds: AFNI’s Fourier shift is float32, the clean room’s double precision. | 16/16 |
environment/nifti-priority-Q | environment variables | AFNI_NIFTI_PRIORITY=Q: the qform rather than the sform (they differ)command lineAFNI_NIFTI_PRIORITY=Q 3dTshift -tpattern alt+z -prefix out.nii '<generated: sq>' | Bit-identical | Open difference 168 values differ from AFNI’s, within the record’s thresholds: AFNI’s Fourier shift is float32, the clean room’s double precision. | 17/17 |
environment/nifti-priority-illegal | environment variables | AFNI_NIFTI_PRIORITY=X: AFNI's warning, the sformcommand lineAFNI_NIFTI_PRIORITY=X 3dTshift -tpattern alt+z -prefix out.nii '<generated: sq>' | Bit-identical | Open difference 168 values differ from AFNI’s, within the record’s thresholds: AFNI’s Fourier shift is float32, the clean room’s double precision. | 17/17 |
environment/nifti-scale-no | environment variables | AFNI_NIFTI_SCALE=NO: int16 with a slope and an intercept stays int16 (slope kept)command lineAFNI_NIFTI_SCALE=NO 3dTshift -tpattern alt+z -prefix out.nii synthetic/tshift/dtypes/int16-slope-inter.nii.gz | Bit-identical | Bit-identical | 17/17 |
environment/nifti-scale-no-copy | environment variables | AFNI_NIFTI_SCALE=NO on a copy of the input: the intercept dropped (AFNI-23)command lineAFNI_NIFTI_SCALE=NO 3dTshift -prefix out.nii synthetic/tshift/dtypes/int16-slope-inter.nii.gz | Bit-identical | Bit-identical | 16/16 |
environment/nifti-scale-no-rlt | environment variables | AFNI_NIFTI_SCALE=NO with -rlt: the trend takes the intercept away, nothing to correctcommand lineAFNI_NIFTI_SCALE=NO 3dTshift -tpattern alt+z -rlt -prefix out.nii synthetic/tshift/dtypes/int16-slope-inter.nii.gz | Bit-identical | Bit-identical | 17/17 |
environment/nifti-scale-no-rlt-ignore | environment variables | AFNI_NIFTI_SCALE=NO with -rlt -ignore 2: the ignored volumes lose the intercept (AFNI-23; corrected, read as without the variable)command lineAFNI_NIFTI_SCALE=NO 3dTshift -tpattern alt+z -rlt -ignore 2 -prefix out.nii synthetic/tshift/dtypes/int16-slope-inter.nii.gz | Bit-identical | Bit-identical | 17/17 |
environment/type-warn-default | environment variables | AFNI_NIFTI_TYPE_WARN unset: AFNI's conversion message, with the muting linescommand line3dTshift -tpattern alt+z -prefix out.nii synthetic/tshift/dtypes/float64.nii.gz | Bit-identical | Open difference 168 values differ from AFNI’s, within the record’s thresholds: AFNI’s Fourier shift is float32, the clean room’s double precision. | 17/17 |
environment/type-warn-yes | environment variables | AFNI_NIFTI_TYPE_WARN=YES: the conversion message alonecommand lineAFNI_NIFTI_TYPE_WARN=YES 3dTshift -tpattern alt+z -prefix out.nii synthetic/tshift/dtypes/float64.nii.gz | Bit-identical | Open difference 168 values differ from AFNI’s, within the record’s thresholds: AFNI’s Fourier shift is float32, the clean room’s double precision. | 17/17 |
environment/nifti-view-tlrc | environment variables | AFNI_NIFTI_VIEW=TLRC: sform code 2 is the tlrc view, so code 3command lineAFNI_NIFTI_VIEW=TLRC 3dTshift -tpattern alt+z -prefix out.nii '<generated: code2>' | Bit-identical | Open difference 168 values differ from AFNI’s, within the record’s thresholds: AFNI’s Fourier shift is float32, the clean room’s double precision. | 17/17 |
environment/default-std-space | environment variables | AFNI_DEFAULT_STD_SPACE=MNI: sform code 5 gives code 4command lineAFNI_DEFAULT_STD_SPACE=MNI 3dTshift -tpattern alt+z -prefix out.nii '<generated: code5>' | Bit-identical | Open difference 168 values differ from AFNI’s, within the record’s thresholds: AFNI’s Fourier shift is float32, the clean room’s double precision. | 17/17 |
environment/sform-code-7 | environment variables | sform code 7: AFNI's warning; AFNI_NIFTI_VIEW=tlrc makes it code 3command lineAFNI_NIFTI_VIEW=tlrc 3dTshift -tpattern alt+z -prefix out.nii '<generated: code7>' | Bit-identical | Open difference 168 values differ from AFNI’s, within the record’s thresholds: AFNI’s Fourier shift is float32, the clean room’s double precision. | 17/17 |
environment/write-type-2 | environment variables | AFNI_NIFTI_WRITE_TYPE=2: a NIfTI-2 outputcommand lineAFNI_NIFTI_WRITE_TYPE=2 3dTshift -tpattern alt+z -prefix out.nii synthetic/tshift/dtypes/float32.nii.gz | Bit-identical | Open difference 168 values differ from AFNI’s, within the record’s thresholds: AFNI’s Fourier shift is float32, the clean room’s double precision. | 17/17 |
environment/allow-milliseconds | environment variables | AFNI_ALLOW_MILLISECONDS=YES with -TR 2000ms: toffset written in ms (AFNI-19)command lineAFNI_ALLOW_MILLISECONDS=YES 3dTshift -tpattern alt+z -TR 2000ms -prefix out.nii synthetic/tshift/dtypes/float32.nii.gz | Bit-identical | Open difference 168 values differ from AFNI’s, within the record’s thresholds: AFNI’s Fourier shift is float32, the clean room’s double precision. | 16/16 |
environment/1D-zero-text | environment variables | AFNI_1D_ZERO_TEXT=YES: text in the -tpattern file is read as 0command lineAFNI_1D_ZERO_TEXT=YES 3dTshift -tpattern @st.1D -prefix out.nii synthetic/tshift/dtypes/float32.nii.gz | Bit-identical | Open difference 169 values differ from AFNI’s, within the record’s thresholds: AFNI’s Fourier shift is float32, the clean room’s double precision. | 16/16 |
environment/1D-text-error | environment variables | text in the -tpattern file: AFNI's parse errorcommand line3dTshift -tpattern @st.1D -prefix out.nii synthetic/tshift/dtypes/float32.nii.gz | Rejected by both AFNI exit 1: ** FATAL ERROR: Can’t read tpattern file st.1D; the replica exit 1: ** FATAL ERROR: Can’t read tpattern file st.1D (the same messages) | Rejected by both AFNI exit 1: ** FATAL ERROR: Can’t read tpattern file st.1D; the clean room exit 1: ** FATAL ERROR: Can’t read tpattern file st.1D (the same messages) | 3/3 |
environment/use-fgets | environment variables | AFNI_USE_FGETS=YES: a file with CR line ends is one row, of 8 values (9 > TR)command lineAFNI_USE_FGETS=YES 3dTshift -tpattern @st.1D -prefix out.nii synthetic/tshift/dtypes/float32.nii.gz | Rejected by both AFNI exit 1: ** FATAL ERROR: Illegal value 9 in tpattern file st.1D; the replica exit 1: ** FATAL ERROR: Illegal value 9 in tpattern file st.1D (the same messages) | Rejected by both AFNI exit 1: ** FATAL ERROR: Illegal value 9 in tpattern file st.1D; the clean room exit 1: ** FATAL ERROR: Illegal value 9 in tpattern file st.1D (the same messages) | 3/3 |
environment/cr-line-ends | environment variables | a file with CR line ends: four rows of two columns, read column by columncommand line3dTshift -tpattern @st.1D -prefix out.nii synthetic/tshift/dtypes/float32.nii.gz | Bit-identical | Open difference 148 values differ from AFNI’s, within the record’s thresholds: AFNI’s Fourier shift is float32, the clean room’s double precision. | 16/16 |
environment/realpath | environment variables | a conversion message names the input by its real path ('..' resolved)command lineAFNI_NIFTI_TYPE_WARN=YES 3dTshift -tpattern alt+z -prefix out.nii '<generated: dotdot-float64>' | Bit-identical | Open difference 168 values differ from AFNI’s, within the record’s thresholds: AFNI’s Fourier shift is float32, the clean room’s double precision. | 17/17 |
environment/norealpath | environment variables | AFNI_NOREALPATH=YES: the message names the input as givencommand lineAFNI_NIFTI_TYPE_WARN=YES AFNI_NOREALPATH=YES 3dTshift -tpattern alt+z -prefix out.nii '<generated: dotdot-float64>' | Bit-identical | Open difference 168 values differ from AFNI’s, within the record’s thresholds: AFNI’s Fourier shift is float32, the clean room’s double precision. | 17/17 |
environment/oblique-warning | environment variables | an oblique input: AFNI's obliquity reportcommand line3dTshift -tpattern alt+z -prefix out.nii '<generated: oblique>' | Bit-identical | Open difference 168 values differ from AFNI’s, within the record’s thresholds: AFNI’s Fourier shift is float32, the clean room’s double precision. | 17/17 |
environment/no-oblique-warning | environment variables | AFNI_NO_OBLIQUE_WARNING=YES: no obliquity reportcommand lineAFNI_NO_OBLIQUE_WARNING=YES 3dTshift -tpattern alt+z -prefix out.nii '<generated: oblique>' | Bit-identical | Open difference 168 values differ from AFNI’s, within the record’s thresholds: AFNI’s Fourier shift is float32, the clean room’s double precision. | 16/16 |
environment/message-prefix | environment variables | AFNI_MESSAGE_PREFIX: on every labelled messagecommand lineAFNI_MESSAGE_PREFIX=run1 3dTshift -verbose -prefix out.nii synthetic/tshift/dtypes/float32.nii.gz | Bit-identical | Bit-identical | 16/16 |
environment/message-colorize-no | environment variables | AFNI_MESSAGE_COLORIZE=NO: labels without terminal escape codescommand lineAFNI_MESSAGE_COLORIZE=NO 3dTshift -prefix out.nii synthetic/tshift/dtypes/float32.nii.gz | Bit-identical | Bit-identical | 16/16 |
environment/echo-commandline | environment variables | AFNI_ECHO_COMMANDLINE=YES (and a log file): the command line is echoedcommand lineAFNI_ECHO_COMMANDLINE=YES 3dTshift -tpattern alt+z -prefix out.nii synthetic/tshift/dtypes/float32.nii.gz | Bit-identical | Open difference 168 values differ from AFNI’s, within the record’s thresholds: AFNI’s Fourier shift is float32, the clean room’s double precision. | 16/16 |
environment/quiet-startup | environment variables | AFNI_QUIET_STARTUP=YES: no version banner (the replica prints none)command lineAFNI_QUIET_STARTUP=YES 3dTshift -tpattern alt+z -prefix out.nii synthetic/tshift/dtypes/float32.nii.gz | Bit-identical | Open difference 168 values differ from AFNI’s, within the record’s thresholds: AFNI’s Fourier shift is float32, the clean room’s double precision. | 17/17 |
environment/nifti-noext | environment variables | AFNI_NIFTI_NOEXT=YES: AFNI writes no header extension, as the replica: the whole filecommand lineAFNI_NIFTI_NOEXT=YES 3dTshift -tpattern alt+z -prefix out.nii synthetic/tshift/dtypes/float32.nii.gz | Bit-identical | Open difference 168 values differ from AFNI’s, within the record’s thresholds: AFNI’s Fourier shift is float32, the clean room’s double precision. | 18/18 |
environment/one-row-dataset | environment variables | a dataset of one row: AFNI writes a 1D text file under the NIfTI name (AFNI-20)command line3dTshift -tpattern alt+z -prefix out.nii '<generated: one-row>' | Expected divergence AFNI writes a dataset of one row as a 1D text file under the NIfTI name, with a random identifier (AFNI-20, unless AFNI_WRITE_1D_AS_PREFIX is YES); the replica writes NIfTI in | Expected divergence AFNI writes a dataset of one row as a 1D text file under the NIfTI name, with a random identifier (AFNI-20, unless AFNI_WRITE_1D_AS_PREFIX is YES); the clean room writes NIfTI in | 4/5 |
environment/write-1D-as-prefix | environment variables | AFNI_WRITE_1D_AS_PREFIX=YES: a dataset of one row is written as NIfTIcommand lineAFNI_WRITE_1D_AS_PREFIX=YES 3dTshift -tpattern alt+z -prefix out.nii '<generated: one-row>' | Bit-identical | Bit-identical | 17/17 |
errors/missing-directory | errors | an output in a missing directory: nothing written, exit 0 (AFNI-26)command line3dTshift -tpattern alt+z -prefix nodir/out.nii synthetic/tshift/dtypes/float32.nii.gz | Rejected by both AFNI exit 0: ** ERROR (nifti_image_write_engine): cannot open output file ‘nodir/out.nii’; the replica exit 0: ** ERROR (nifti_image_write_engine): cannot open output file ‘nodir/out.nii’ (the same messages) | Rejected by both AFNI exit 0: ** ERROR (nifti_image_write_engine): cannot open output file ‘nodir/out.nii’; the clean room exit 0: ** ERROR (nifti_image_write_engine): cannot open output file ‘nodir/out.nii’ (the same messages) | 3/3 |
errors/missing-directory-copy | errors | the same for a copy of the input (AFNI-26)command line3dTshift -prefix nodir/out.nii synthetic/tshift/dtypes/float32.nii.gz | Rejected by both AFNI exit 0: ** ERROR (nifti_image_write_engine): cannot open output file ‘nodir/out.nii’; the replica exit 0: ** ERROR (nifti_image_write_engine): cannot open output file ‘nodir/out.nii’ (the same messages) | Rejected by both AFNI exit 0: ** ERROR (nifti_image_write_engine): cannot open output file ‘nodir/out.nii’; the clean room exit 0: ** ERROR (nifti_image_write_engine): cannot open output file ‘nodir/out.nii’ (the same messages) | 3/3 |
errors/missing-directory-verbose | errors | the same with -verbose, whose last line names the file not written (AFNI-26)command line3dTshift -verbose -tpattern alt+z -prefix nodir/out.nii synthetic/tshift/dtypes/float32.nii.gz | Rejected by both AFNI exit 0: ** ERROR (nifti_image_write_engine): cannot open output file ‘nodir/out.nii’; the replica exit 0: ** ERROR (nifti_image_write_engine): cannot open output file ‘nodir/out.nii’ (the same messages) | Rejected by both AFNI exit 0: ** ERROR (nifti_image_write_engine): cannot open output file ‘nodir/out.nii’; the clean room exit 0: ** ERROR (nifti_image_write_engine): cannot open output file ‘nodir/out.nii’ (the same messages) | 3/3 |
global/D-nifti-priority-Q | global options | -DAFNI_NIFTI_PRIORITY=Q: as the environment variablecommand line3dTshift -DAFNI_NIFTI_PRIORITY=Q -tpattern alt+z -prefix out.nii '<generated: sq>' | Bit-identical | Open difference 168 values differ from AFNI’s, within the record’s thresholds: AFNI’s Fourier shift is float32, the clean room’s double precision. | 17/17 |
global/D-nifti-view-tlrc | global options | -DAFNI_NIFTI_VIEW=TLRC: as the environment variablecommand line3dTshift -DAFNI_NIFTI_VIEW=TLRC -tpattern alt+z -prefix out.nii '<generated: code2>' | Bit-identical | Open difference 168 values differ from AFNI’s, within the record’s thresholds: AFNI’s Fourier shift is float32, the clean room’s double precision. | 17/17 |
global/D-write-type-2 | global options | -DAFNI_NIFTI_WRITE_TYPE=2: as the environment variablecommand line3dTshift -DAFNI_NIFTI_WRITE_TYPE=2 -tpattern alt+z -prefix out.nii synthetic/tshift/dtypes/float32.nii.gz | Bit-identical | Open difference 168 values differ from AFNI’s, within the record’s thresholds: AFNI’s Fourier shift is float32, the clean room’s double precision. | 17/17 |
global/D-nifti-scale-no | global options | -DAFNI_NIFTI_SCALE=NO: as the environment variablecommand line3dTshift -DAFNI_NIFTI_SCALE=NO -tpattern alt+z -prefix out.nii synthetic/tshift/dtypes/int16-slope-inter.nii.gz | Bit-identical | Bit-identical | 17/17 |
divergence/afni-format-output | expected divergences | -prefix without .nii: AFNI writes its own BRIK/HEAD formatcommand line3dTshift -tpattern alt+z -prefix out.nii synthetic/tshift/dtypes/float32.nii.gz | Expected divergence The replica writes NIfTI only; it rejects a -prefix that does not end in .nii or .nii.gz, where AFNI writes its own format. | Expected divergence The clean room writes NIfTI only; it rejects a -prefix that does not end in .nii or .nii.gz, where AFNI writes its own format. | 2/2 |
divergence/voxshift | expected divergences | -voxshift: per-voxel shifts from a datasetcommand line3dTshift -voxshift gen:voxshift -prefix out.nii synthetic/tshift/dtypes/float32.nii.gz | Expected divergence -voxshift is not supported by the replica (fMRIPrep does not use it). | Expected divergence -voxshift is not supported by the clean room (fMRIPrep does not use it). | 2/2 |
real/ds001600-acq-v4 | real images | fMRIPrep's call (-ignore 0 -tzero -TR -tpattern @file) on sub-1_task-rest_acq-v4_boldcommand line3dTshift -ignore 0 -tzero <middle> -TR <TR>s -tpattern @slice_timing.1D -prefix out.nii openneuro/ds001600/sub-1/func/sub-1_task-rest_acq-v4_bold.nii.gz (fMRIPrep's slice times from openneuro/ds001600/sub-1/func/sub-1_task-rest_acq-v4_bold.json) | Bit-identical | Bit-identical | 15/15 |
real/ds001600-acq-v1 | real images | fMRIPrep's call (-ignore 0 -tzero -TR -tpattern @file) on sub-1_task-rest_acq-v1_boldcommand line3dTshift -ignore 0 -tzero <middle> -TR <TR>s -tpattern @slice_timing.1D -prefix out.nii openneuro/ds001600/sub-1/func/sub-1_task-rest_acq-v1_bold.nii.gz (fMRIPrep's slice times from openneuro/ds001600/sub-1/func/sub-1_task-rest_acq-v1_bold.json) | Bit-identical | Bit-identical | 15/15 |
real/ds001600-acq-v2 | real images | fMRIPrep's call (-ignore 0 -tzero -TR -tpattern @file) on sub-1_task-rest_acq-v2_boldcommand line3dTshift -ignore 0 -tzero <middle> -TR <TR>s -tpattern @slice_timing.1D -prefix out.nii openneuro/ds001600/sub-1/func/sub-1_task-rest_acq-v2_bold.nii.gz (fMRIPrep's slice times from openneuro/ds001600/sub-1/func/sub-1_task-rest_acq-v2_bold.json) | Bit-identical | Bit-identical | 15/15 |
real/ds001600-acq-PA | real images | fMRIPrep's call (-ignore 0 -tzero -TR -tpattern @file) on sub-1_task-rest_acq-PA_boldcommand line3dTshift -ignore 0 -tzero <middle> -TR <TR>s -tpattern @slice_timing.1D -prefix out.nii openneuro/ds001600/sub-1/func/sub-1_task-rest_acq-PA_bold.nii.gz (fMRIPrep's slice times from openneuro/ds001600/sub-1/func/sub-1_task-rest_acq-PA_bold.json) | Bit-identical | Bit-identical | 15/15 |
real/ds000210-echo-1 | real images | fMRIPrep's call (-ignore 0 -tzero -TR -tpattern @file) on sub-02_task-cuedSGT_run-01_echo-1_boldcommand line3dTshift -ignore 0 -tzero <middle> -TR <TR>s -tpattern @slice_timing.1D -prefix out.nii openneuro/ds000210/sub-02/func/sub-02_task-cuedSGT_run-01_echo-1_bold.nii.gz (fMRIPrep's slice times from openneuro/ds000210/task-cuedSGT_echo-1_bold.json) | Bit-identical | Open difference 240 values differ from AFNI’s, within the record’s thresholds: AFNI’s Fourier shift is float32, the clean room’s double precision. | 15/15 |
real/ds000210-echo-2 | real images | fMRIPrep's call (-ignore 0 -tzero -TR -tpattern @file) on sub-02_task-cuedSGT_run-01_echo-2_boldcommand line3dTshift -ignore 0 -tzero <middle> -TR <TR>s -tpattern @slice_timing.1D -prefix out.nii openneuro/ds000210/sub-02/func/sub-02_task-cuedSGT_run-01_echo-2_bold.nii.gz (fMRIPrep's slice times from openneuro/ds000210/task-cuedSGT_echo-2_bold.json) | Bit-identical | Open difference 173 values differ from AFNI’s, within the record’s thresholds: AFNI’s Fourier shift is float32, the clean room’s double precision. | 15/15 |
real/ds000210-echo-3 | real images | fMRIPrep's call (-ignore 0 -tzero -TR -tpattern @file) on sub-02_task-cuedSGT_run-01_echo-3_boldcommand line3dTshift -ignore 0 -tzero <middle> -TR <TR>s -tpattern @slice_timing.1D -prefix out.nii openneuro/ds000210/sub-02/func/sub-02_task-cuedSGT_run-01_echo-3_bold.nii.gz (fMRIPrep's slice times from openneuro/ds000210/task-cuedSGT_echo-3_bold.json) | Bit-identical | Open difference 146 values differ from AFNI’s, within the record’s thresholds: AFNI’s Fourier shift is float32, the clean room’s double precision. | 15/15 |
real/ds006736 | real images | fMRIPrep's call (-ignore 0 -tzero -TR -tpattern @file) on sub-004_task-freeRecall_boldcommand line3dTshift -ignore 0 -tzero <middle> -TR <TR>s -tpattern @slice_timing.1D -prefix out.nii openneuro/ds006736/sub-004/func/sub-004_task-freeRecall_bold.nii.gz (fMRIPrep's slice times from openneuro/ds006736/sub-004/func/sub-004_task-freeRecall_bold.json) | Bit-identical | Open difference 31 values differ from AFNI’s, within the record’s thresholds: AFNI’s Fourier shift is float32, the clean room’s double precision. | 15/15 |
real/ds006010-uint16 | real images | fMRIPrep's call (-ignore 0 -tzero -TR -tpattern @file) on sub-206_task-category_run-01_boldcommand line3dTshift -ignore 0 -tzero <middle> -TR <TR>s -tpattern @slice_timing.1D -prefix out.nii openneuro/ds006010/sub-206/func/sub-206_task-category_run-01_bold.nii.gz (fMRIPrep's slice times from openneuro/ds006010/sub-206/func/sub-206_task-category_run-01_bold.json) | Bit-identical | Open difference 23,875,172 values differ from AFNI’s, within the record’s thresholds: AFNI’s Fourier shift is float32, the clean room’s double precision. | 14/14 |
real/ds003345-ms-header | real images | fMRIPrep's call (-ignore 0 -tzero -TR -tpattern @file) on sub-22973_task-PenaltyKik_run-02_boldcommand line3dTshift -ignore 0 -tzero <middle> -TR <TR>s -tpattern @slice_timing.1D -prefix out.nii openneuro/ds003345/sub-22973/func/sub-22973_task-PenaltyKik_run-02_bold.nii.gz (fMRIPrep's slice times from openneuro/ds003345/sub-22973/func/sub-22973_task-PenaltyKik_run-02_bold.json) | Bit-identical | Open difference 177 values differ from AFNI’s, within the record’s thresholds: AFNI’s Fourier shift is float32, the clean room’s double precision. | 15/15 |
real/ds005454-mb4-96-slices | real images | fMRIPrep's call (-ignore 0 -tzero -TR -tpattern @file) on sub-16_task-rest_boldcommand line3dTshift -ignore 0 -tzero <middle> -TR <TR>s -tpattern @slice_timing.1D -prefix out.nii openneuro/ds005454/sub-16/func/sub-16_task-rest_bold.nii.gz (fMRIPrep's slice times from openneuro/ds005454/sub-16/func/sub-16_task-rest_bold.json) | Bit-identical | Open difference 1,808 values differ from AFNI’s, within the record’s thresholds: AFNI’s Fourier shift is float32, the clean room’s double precision. | 15/15 |
real/ds003345-linear | real images | fMRIPrep's call with -linearcommand line3dTshift -ignore 0 -linear -tzero <middle> -TR <TR>s -tpattern @slice_timing.1D -prefix out.nii openneuro/ds003345/sub-22973/func/sub-22973_task-PenaltyKik_run-02_bold.nii.gz (fMRIPrep's slice times from openneuro/ds003345/sub-22973/func/sub-22973_task-PenaltyKik_run-02_bold.json) | Bit-identical | Bit-identical | 15/15 |
real/ds003345-cubic | real images | fMRIPrep's call with -cubiccommand line3dTshift -ignore 0 -cubic -tzero <middle> -TR <TR>s -tpattern @slice_timing.1D -prefix out.nii openneuro/ds003345/sub-22973/func/sub-22973_task-PenaltyKik_run-02_bold.nii.gz (fMRIPrep's slice times from openneuro/ds003345/sub-22973/func/sub-22973_task-PenaltyKik_run-02_bold.json) | Bit-identical | Bit-identical | 15/15 |
real/ds003345-quintic | real images | fMRIPrep's call with -quinticcommand line3dTshift -ignore 0 -quintic -tzero <middle> -TR <TR>s -tpattern @slice_timing.1D -prefix out.nii openneuro/ds003345/sub-22973/func/sub-22973_task-PenaltyKik_run-02_bold.nii.gz (fMRIPrep's slice times from openneuro/ds003345/sub-22973/func/sub-22973_task-PenaltyKik_run-02_bold.json) | Bit-identical | Open difference 6 values differ from AFNI’s, within the record’s thresholds: quintic interpolation, in the last float32 bit; the cause is not reproduced yet (the record’s notes). | 15/15 |
real/ds003345-heptic | real images | fMRIPrep's call with -hepticcommand line3dTshift -ignore 0 -heptic -tzero <middle> -TR <TR>s -tpattern @slice_timing.1D -prefix out.nii openneuro/ds003345/sub-22973/func/sub-22973_task-PenaltyKik_run-02_bold.nii.gz (fMRIPrep's slice times from openneuro/ds003345/sub-22973/func/sub-22973_task-PenaltyKik_run-02_bold.json) | Bit-identical | Open difference 6 values differ from AFNI’s, within the record’s thresholds: heptic interpolation, in the last float32 bit; the cause is not reproduced yet (the record’s notes). | 15/15 |
real/ds003345-wsinc5 | real images | fMRIPrep's call with -wsinc5command line3dTshift -ignore 0 -wsinc5 -tzero <middle> -TR <TR>s -tpattern @slice_timing.1D -prefix out.nii openneuro/ds003345/sub-22973/func/sub-22973_task-PenaltyKik_run-02_bold.nii.gz (fMRIPrep's slice times from openneuro/ds003345/sub-22973/func/sub-22973_task-PenaltyKik_run-02_bold.json) | Bit-identical | Bit-identical | 15/15 |
real/ds003345-wsinc9 | real images | fMRIPrep's call with -wsinc9command line3dTshift -ignore 0 -wsinc9 -tzero <middle> -TR <TR>s -tpattern @slice_timing.1D -prefix out.nii openneuro/ds003345/sub-22973/func/sub-22973_task-PenaltyKik_run-02_bold.nii.gz (fMRIPrep's slice times from openneuro/ds003345/sub-22973/func/sub-22973_task-PenaltyKik_run-02_bold.json) | Bit-identical | Bit-identical | 15/15 |
real/ds003345-ignore-4 | real images | fMRIPrep's call with -ignore 4 (non-steady-state volumes)command line3dTshift -ignore 4 -tzero <middle> -TR <TR>s -tpattern @slice_timing.1D -prefix out.nii openneuro/ds003345/sub-22973/func/sub-22973_task-PenaltyKik_run-02_bold.nii.gz (fMRIPrep's slice times from openneuro/ds003345/sub-22973/func/sub-22973_task-PenaltyKik_run-02_bold.json) | Bit-identical | Open difference 137 values differ from AFNI’s, within the record’s thresholds: AFNI’s Fourier shift is float32, the clean room’s double precision. | 15/15 |
real/ds000210-header-timing | real images | no -tpattern: the slice timing in the header (slice_code 3, ALT_INC)command line3dTshift -prefix out.nii openneuro/ds000210/sub-02/func/sub-02_task-cuedSGT_run-01_echo-1_bold.nii.gz | Bit-identical | Open difference 222 values differ from AFNI’s, within the record’s thresholds: AFNI’s Fourier shift is float32, the clean room’s double precision. | 13/13 |
real/ds001600-header-zero-duration | real images | no -tpattern: slice_code 5 with slice_duration 0, so a copy of the inputcommand line3dTshift -prefix out.nii openneuro/ds001600/sub-1/func/sub-1_task-rest_acq-v4_bold.nii.gz | Bit-identical | Bit-identical | 13/13 |
difftest/metre-oblique-default-steps | random testing | Bit-identical | – | 14/14 | |
difftest/header-milliseconds-toffset | random testing | – | Bit-identical | 13/13 |
Speed
3dTshiftSeconds for the whole command (reading, shifting, writing), the median of repeated runs, on a log scale. The factor is how many times faster the clean room is than AFNI, both on one thread.
- AFNI 3dTshift, 1 thread
- replica, 1 thread
- replica, 12 threads
- clean room, 1 thread
- clean room, 12 threads
- ds000210: 64×64×33, 260 vol.AFNI 3dTshift, 1 thread 2.53 sreplica, 1 thread 1.53 sreplica, 12 threads 0.701 sclean room, 1 thread 1.23 sclean room, 12 threads 0.43 s2.1×
- ds006010: 96×96×69, 113 vol.AFNI 3dTshift, 1 thread 6.68 sreplica, 1 thread 3.03 sreplica, 12 threads 1.48 sclean room, 1 thread 2.46 sclean room, 12 threads 1.13 s2.7×
- ds005454: 160×160×96, 280 vol.AFNI 3dTshift, 1 thread 53 sreplica, 1 thread 29.9 sreplica, 12 threads 15.6 sclean room, 1 thread 23.1 sclean room, 12 threads 8.41 s2.3×
From the benchmark report docs/benchmarks/afni-tshift.json (Intel® Core™ i7-8750H CPU @ 2.20GHz, 12 logical CPUs).
Corrections by default
Where AFNI has a deterministic defect that changes a result, both ports correct it by default, fix, and warn. upstream_defects="reproduce" (on the command line --upstream-defects reproduce from the next release, LARMORX_UPSTREAM_DEFECTS=reproduce in 0.1.0rc1) gives AFNI’s behaviour, and the records compare with it. The records’ lists of what fix changed meet AFNI-01, AFNI-02, AFNI-07, AFNI-08, AFNI-16, AFNI-19, AFNI-22 and AFNI-23 (register). AFNI-03 and AFNI-05 were AFNI 25.2.09’s: AFNI 26.3.05 behaves as LARMORX corrected them.
Random testing
Random testing runs random valid inputs and option combinations through the original and both ports, in long runs of several hours: inputs from seeded plain arithmetic (up to 32³ voxels; orientations, data types, scale factors and value ranges of every kind), with options drawn in random combinations from those the program accepts (how random testing works). A difference is shrunk to the smallest input and fewest options that still show it, then fixed and kept as a case of the record, registered as a defect of the original, or reported. The latest long run:
Random testing, both ports against the original: AFNI 3dTshift 26.3.05, the long run of 2026-10-25 (seed 20261025, 6.2 h for 21 programs): random valid inputs and option combinations, each run through all three
| Program | Random cases | Extreme | Options covered | Agree | glibc | Notices | Undefined | Differ | Heavy | Guard | Unclear |
|---|---|---|---|---|---|---|---|---|---|---|---|
| 3dTshiftreplica, clean room | 2,266 | 0 | 18 | 2,117 | · | 44 | 21 | 84 | · | · | · |
- fixed in LARMORX 3dTshift (clean room), 1 case(s): the
fixpass,header fields (scaling, timing, slice fields, units, xform codes): AFNI 26.3.05 fixed AFNI-03 (header slice code 2 read end…start); the clean room’sreproducestill reads 25.2.09’s zeros and names AFNI-03 (the random-testing run against 26.3.05: 73 findings, 4 with AFNI-05 too); its alignment is the clean room’s own, from its specification (specs/3dTshift.md §3.2, §6.4); fixed 2026-10-29 by the clean-room alignment (next-steps 3b): both modes follow AFNI 26.3.05 and never name the defect; none in that part’s random-testing run of half an hour against 26.3.05 (its run of 2026-10-29) (details) - fixed in LARMORX 3dTshift (clean room), 1 case(s):
header fields (scaling, timing, slice fields, units, xform codes): header slice times in milliseconds or microseconds: the step in seconds stays a double and each time is a float32 running sum of it (observed:-slice kreads every time back); both findings replay as agree (2026-10-29) (details) - fixed in LARMORX 3dTshift (replica), 83 case(s): the replica’s default equal to the clean room’s: the clean room’s AFNI-07 default now writes the replica’s steps (the file matrix’s column lengths, then converted) and, for a qform, the qform matrix computed with millimetre voxel sizes and offsets, rounded once; the AFNI-07 and AFNI-16 notices in the replica’s words; all 83 findings replay as agree (2026-10-29) (AFNI-07)
- fixed in LARMORX 3dTshift (replica), 1 case(s): the replica’s default equal to the clean room’s, the
fixpass: the clean room’s AFNI-07 default now writes the replica’s steps (the file matrix’s column lengths, then converted) and, for a qform, the qform matrix computed with millimetre voxel sizes and offsets, rounded once; the AFNI-07 and AFNI-16 notices in the replica’s words; all 83 findings replay as agree (2026-10-29) (AFNI-07)
Notices: a correction named in a case where it changed nothing the input shows (defect, cases): 3dTshift: AFNI-01 (16), AFNI-03 (28), AFNI-05 (38), AFNI-07 (2), AFNI-16 (12).
Every case is drawn from its tool, the run's seed and its number, and replays anywhere: how random testing works; each difference's triage: validation/difftest/triage.toml.
Known limits
LARMORX writes NIfTI only (a -prefix in AFNI’s own format is refused), -voxshift is not supported, and a dataset of one row is written as NIfTI where AFNI writes a 1D text file (AFNI-20): the three expected divergences. Writing an existing output in place in a directory that cannot be written, as AFNI does, is planned.
History
- until 2026-10-29: the replica followed AFNI 25.2.09, bit-identical to it in every compared case of its record.
- 2026-10-29: AFNI 26.3.05 releases the Medical College of Wisconsin’s code under CC BY 4.0; the replica moves from
larmorx-gplintolarmorx, and both ports follow AFNI 26.3.05. - 2026-11-04: the clean room’s
reproducecomputessinfandcosfas glibc 2.35 does (GLIBC-07); the two cases of the weighted sinc’s functions join both records. - 2026-11-13: the replica’s record made again from a commit with no uncommitted changes, as every record must be (the record of 2026-11-04 was not): the same result in every one of its 317 cases.
Data credits
The data this page shows or names: each dataset with its version, DOI and licence, from LARMORX's test-data catalog. Public-domain dedications (CC0, PDDL) ask nothing; the datasets are cited all the same.
- Multi-echo fMRI replication sample (OpenNeuro ds000210, version 00002), Open Data Commons Public Domain Dedication and Licence 1.0.
- Example fieldmaps (OpenNeuro ds001600, version 1.0.0), Creative Commons Attribution-ShareAlike (CC BY-SA; the dataset gives no version). Attribution: Cieslak M., Elliott M., Satterthwaite T. Example Fieldmaps. OpenNeuro ds001600, version 1.0.0 (Siemens Prisma, University of Pennsylvania). The images shown are adapted from it: reoriented to RAS, cropped to the region shown, masked outside it, and shown as the outputs of the programs compared. Share-alike: the images adapted from this dataset are shared under the same licence, CC BY-SA.
- PenaltyKik.02 (OpenNeuro ds003345, version 1.0.2, doi:10.18112/openneuro.ds003345.v1.0.2), CC0 1.0 public-domain dedication.
- Political Moralization (OpenNeuro ds005040, version 1.2.0, doi:10.18112/openneuro.ds005040.v1.2.0), CC0 1.0 public-domain dedication.
- fMRIPrep boot camp 7T training dataset (OpenNeuro ds005454, version 1.0.0, doi:10.18112/openneuro.ds005454.v1.0.0), Creative Commons Attribution 4.0 (CC BY 4.0). Attribution: Sleight EC, Esteban O, Grouiller F. fMRIPrep boot camp -- 7T training dataset. OpenNeuro ds005454, version 1.0.0. doi:10.18112/openneuro.ds005454.v1.0.0 The images shown are adapted from it: reoriented to RAS, cropped to the region shown, masked outside it, and shown as the outputs of the programs compared.
- Geometric shape regularity fMRI (OpenNeuro ds006010, version 1.0.1, doi:10.18112/openneuro.ds006010.v1.0.1), CC0 1.0 public-domain dedication.
- CS_fmri (OpenNeuro ds006736, version 1.0.0, doi:10.18112/openneuro.ds006736.v1.0.0), CC0 1.0 public-domain dedication.